| National Highway Traffic Safety Administration |
|
49 CFR 572.127(f) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. ATD 6259 |
1987 |
Adapter plate
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM B193 |
1987 |
Standard Test Method for Resistivity of Electrical Conductor Materials
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(d)(24) |
ASME B18.2.2 |
1987 |
Square and Hex Nuts (Inch Series)
|
American Society of Mechanical Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASME/ANSI A17.1 |
1987 |
Safety Code for Elevators, Dumbwaiters and Moving Walks including the A17.1b Addendum
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-305 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M080 |
1987 |
Right leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Energy Department |
88 FR 40406 |
10 CFR 430 |
ASTM E97-82 (1987) |
1987 |
Energy Conservation Program: Test Procedure for Consumer Water Heaters and Residential-Duty Commercial Water Heaters
|
ASTM International |
| Coast Guard |
|
46 CFR 56.25-20(c) |
ASME B18.2.2 |
1987 |
Square and Hex Nuts (Inch Series)
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(12) |
ASTM D4734 |
1987 |
Standard Specification for Refined Benzene--545
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 300.915(f)(9) |
ASTM D97 |
1987 |
Standard Test Method for Pour Point of Petroleum Oils
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(c)(1) |
ISO 8316:1987(E) |
1987 |
Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(16) |
ASTM E258 |
1987 |
Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-16 |
1987 |
Knee cap assembly
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b)(2)(iv) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(c)(2) |
Drawing No. 880105-206 |
1987 |
Neck cable
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM A505 |
1987 |
Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.172(a) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 147.1450(a)(3) |
NVUIC regulations |
1987 |
Nevada Revised Statutes [NRS], Volume 28, Chapters 522.010 through 522.190, Inclusive
|
State of Nevada |
| Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.2) |
EPA Method 9020 |
1987 |
Test Methods for Evaluating Solid Waste
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(e) |
Drawing No. 78051-218 |
1987 |
Hybrid III Anthropomorphic Test Dummy, Revision T
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA-SID-M080 |
1987 |
Leg Assembly, Right
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4011 |
1987 |
Knee flesh
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.522(a)(6) |
Bellcore TR-TSY-000508 |
1987 |
Automatic Message Accounting, Section 8.1, Issue 2
|
Bell Communications Research |
| National Highway Traffic Safety Administration |
|
49 CFR 572.153(b)(1)(iii) |
Drawing No. SA-572-S23 |
1987 |
Neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Housing and Urban Development Department |
|
24 CFR 200.944(a)(4) |
ASTM D3043 |
1987 |
Standard Methods of Testing Structural Panels in Flexure
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(3) |
Drawing No. 78051-303 |
1987 |
Neck Bracket
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. TE-107-001 |
1987 |
Structural replacement of 1/2 mass of the neck load transducer
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM D150 |
1987 |
Standard Test Method for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (19) Nitrite |
WC Method B-1011 |
1987 |
Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography
|
Waters Corp. |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(3) |
EPA-600-1-87-014 |
1987 |
Occurrence of Pathogens in Distribution and Marketing Municipal Sludges
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-306 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M081 |
1987 |
Left leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.122(a) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.132(a) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(8) |
ASTM E169 |
1987 |
Standard Practice for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Energy Department |
88 FR 40406 |
10 CFR 431 |
ASTM E97-82 (1987) |
1987 |
Energy Conservation Program: Test Procedure for Consumer Water Heaters and Residential-Duty Commercial Water Heaters
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(iv) |
EPA Method 8260 |
1987 |
Gas Chromatography/Mass Spectrometry for Volatile Organics: Capillary Column Technique
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(c)(2) |
Drawing No. 9000341 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM B193 |
1987 |
Standard Test Method for Resistivity of Electrical Conductor Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1450(a)(4) |
NVUIC regulations |
1987 |
Nevada Administrative Code [NAC], Underground Injection Control Regulations, Sections 1 through 96.1, Inclusive. July 22, 1987, revised September 3, 1987 (amending NAC Chapter 445)
|
State of Nevada |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA-SID-M081 |
1987 |
Leg Assembly, Left
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4014 |
1987 |
Lower leg
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(h) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.153(c)(2) |
Drawing No. 9001336 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Energy Department |
|
10 CFR 440 Appendix A |
NWWDA I.S. 2 |
1987 |
Industry Standard for Wood Windows
|
National Wood Window and Door Association |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(67) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(3) |
Drawing No. 78051-307 |
1987 |
Neck Bracket
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(g) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. ATD 6262 |
1987 |
Head mounting washer
|
Reprographic Technologies |