| National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-46 |
1987 |
Upper leg assembly, left
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b) |
Drawing No. TE-2208-001 |
1987 |
Neck mounting adaptor
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b)(2)(i) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(9) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(d) |
Drawing No. 78051-218 |
1987 |
Hybrid III Anthropomorphic Test Dummy, Revision T
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(d) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.152(a) |
Drawing No. SA-572-S80 |
1987 |
Accelerometer Mounting Block
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.173(b)(1)(iii) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C920 |
1987 |
Standard Specification for Elastomeric Joint Sealants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(5)(v) |
ASME MFC-7M |
1987 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113 |
Drawing No. 78051-306 |
1987 |
Neck Assembly
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(e) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.155(f) |
Drawing No. SA-572-S23 |
1987 |
Neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-98 |
1987 |
Title not specified
|
General Motors Corporation |
| Coast Guard |
|
33 CFR 183.5(b) |
UL 1114 |
1987 |
Marine (USCG Type A) Flexible Fuel Line Hose
|
Underwriters Laboratories, Inc. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(1) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 1037.610(c) |
SAE J-1526 |
1987 |
Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7421 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(80) |
ASTM D2013 |
1986 |
Standard Method of Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7420 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.100(a)(3) |
AKUIC regulations |
1986 |
Alaska Administrative Code, Alaska Oil and Gas Conservation Commission, 20 AAC 25.005 through 20 AAC 25.570
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 60.4360 |
GPA 2377 |
1986 |
Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes
|
Gas Processors Association |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(iii) |
EPA Method 0030 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 63.25-3(a) |
ANSI/AGA Z21.22 |
1986 |
Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems
|
American Gas Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 6 |
1986 |
Industry Standard for Wood Stile and Rail Doors
|
National Wood Window and Door Association |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM B694 |
1986 |
Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7740 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.1751(a)(4) |
NDUIC regulations |
1986 |
North Dakota Administrative Code, Chapter 43-02-02 (Subsurface Mineral Exploration and Development) (August 1986), and Chapter 43-02-02.1 (Underground Injection Control Program) (March 1, 1984)
|
State of North Dakota |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 261 |
SW-846 Test Methods 0010 |
1986 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
36 CFR 1235.4(d)(1) |
ANSI X3.39 |
1986 |
Recorded Magnetic Tape for Information Interchange (1600 CPI, PE)
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 98.364(e)(2) |
ASME MFC-4M |
1986 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7840 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 268 Appendix IX Note |
EPA SW-846 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(iv) |
EPA Method 1320 |
1986 |
Multiple Extraction Procedure
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 28.40(b) |
ABYC P-1 |
1986 |
Installation of Exhaust Systems for Propulsion and Auxiliary Engines
|
American Boat and Yacht Council |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C549 |
1986 |
Perlite Loose Fill Insulation
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACCA Manual J |
1986 |
Load Calculation for Residential Winter and Summer Air Conditioning
|
Air Conditioning Contractors of America |
| Environmental Protection Agency |
|
40 CFR 98.128 Note to In Light Liquid Service |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Coast Guard |
|
33 CFR 120.120(b) |
MSC Circular 443 |
1986 |
Measures to Prevent Unlawful Acts Against Passengers and Crews Aboard Ships
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7841 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.2400(b)(5) |
WAUIC regulations |
1986 |
Revised Code of Washington, chapter 90.48 (Bureau of National Affairs, 1986 Laws), entitled, Water Pollution Control
|
State of Washington |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(1) |
RUS Bulletin 50-4 (D-801) |
1986 |
Specification and Drawings for 34.5/19.9 kV Distribution Line Construction (11–86).
|
Rural Utilities Service, U.S. Department of Agriculture |
| Coast Guard |
|
36 CFR 1235.4(e)(1) |
ANSI X3.54 |
1986 |
Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording)
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7841 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(3) |
ASTM D3792 |
1986 |
Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 264.314(b) |
EPA SW-846 |
1986 |
Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-400 |
1986 |
Point-of-Use Distillation Drinking Water Systems
|
Water Quality Association |
| Environmental Protection Agency |
|
40 CFR 60.17(p)(1) |
UL 103 |
1986 |
Chimneys, Factory-Built Residential Type and Building Heating Appliance, Sixth Edition
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 265.1063(h) |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |