| Coast Guard |
|
33 CFR 127.003(b) |
ANSI S12.13 |
1986 |
Performance Requirements for Combustible Gas Detectors
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(ii) |
EPA Method 8021 |
1986 |
Volatile Organic Compounds in Water by Purge and Trap Capillary Column Gas Chromatography with Photoionization and Electrolytic Conductivity Detectors in Series
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.128 Note to In Light Liquid Service |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Coast Guard |
|
46 CFR 160.049-1(a)(1) |
FedSpec CCC-C-700G |
1986 |
Cloth, Coated, Vinyl, Coated (Artificial Leather)
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 1037.610(c) |
SAE J-1321 |
1986 |
Joint TMC/SAE Fuel Consumption Test Procedure Type II
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7740 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 100.201 Accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Energy Department |
|
10 CFR 440 Appendix A |
NWWDA I.S. 6 |
1986 |
Industry Standard for Wood Stile and Rail Doors
|
National Wood Window and Door Association |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 261 |
SW-846 Test Methods 0010 |
1986 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7191 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.364(e)(2) |
ASME MFC-4M |
1986 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 147.950(a)(2) |
LAUIC regulations |
1986 |
Underground Injection Control Program Regulations for Class I, III, IV, and V wells, Statewide Order No. 29-N-1 (February 20, 1982), as amended June 1, 1985 and January 20, 1986
|
State of Louisiana |
| Environmental Protection Agency |
|
40 CFR 266.106(g)(2) |
EPA SW-846 |
1986 |
Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC H-22 |
1986 |
DC Electric Bilge Pumps Operating Under 50 Volts
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7470 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(14) |
ASTM E50 |
1986 |
Standard Method Practice for Apparatus Reagents, and Safety Precautions for Chemical Analysis of Metals
|
ASTM International |
| Coast Guard |
|
46 CFR 63.05-1(b)(1) |
ANSI/AGA Z21.22 |
1986 |
Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7760 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(7) |
ASTM D923 |
1986 |
Standard Practices for Sampling Electrical Insulating Liquids
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7210 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 39.1005(f)(1) |
IMO SOLAS |
1986 |
International Convention for the Safety of Life at Sea, Consolidated Text of the 1974 SOLAS Convention, the 1978 SOLAS Protocol, the 1981 and 1983 SOLAS Amendments
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(i) |
EPA Method 0010 |
1986 |
Modified Method 5 Sampling Train
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7421 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 114.600(b) |
ANSI B31.1 |
1986 |
Code for Pressure Piping, Power Piping
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7420 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.100(a)(3) |
AKUIC regulations |
1986 |
Alaska Administrative Code, Alaska Oil and Gas Conservation Commission, 20 AAC 25.005 through 20 AAC 25.570
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 60.4360 |
GPA 2377 |
1986 |
Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes
|
Gas Processors Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-9250 |
1986 |
Chloride (Colorimetric, Automated Ferricyanide AAI), Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 59.213(b)(1) |
ASTM E220 |
1986 |
Standard Method for Calibration of Thermocouples by Comparison Techniques
|
ASTM International |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM D4568 |
1986 |
Standard Test Method for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials
|
ASTM International |
| Coast Guard |
|
46 CFR 63.25-3(a) |
ANSI/AGA Z21.22 |
1986 |
Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(ii) |
EPA Method 20 |
1986 |
Source Assessment Sampling System (SASS)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7740 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
ASTM D1253 |
1986 |
Standard Test Method for Residual Chlorine in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1751(a)(4) |
NDUIC regulations |
1986 |
North Dakota Administrative Code, Chapter 43-02-02 (Subsurface Mineral Exploration and Development) (August 1986), and Chapter 43-02-02.1 (Underground Injection Control Program) (March 1, 1984)
|
State of North Dakota |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7840 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 268 Appendix IX Note |
EPA SW-846 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 278 |
EPA SW-846 Test Methods 0010 |
1986 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(b)(1) |
Drawing No. 78051-339 |
1986 |
Pivot Pin--Neck Transducer
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(iii) |
EPA Method 0030 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7841 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.2400(b)(5) |
WAUIC regulations |
1986 |
Revised Code of Washington, chapter 90.48 (Bureau of National Affairs, 1986 Laws), entitled, Water Pollution Control
|
State of Washington |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C549 |
1986 |
Perlite Loose Fill Insulation
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACCA Manual J |
1986 |
Load Calculation for Residential Winter and Summer Air Conditioning
|
Air Conditioning Contractors of America |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 |
EPA Method 7841 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(2) |
ASME MFC-4M |
1986 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 264.314(b) |
EPA SW-846 |
1986 |
Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
ANSI A117.1 |
1986 |
American National Standard for Buildings and Facilities: Providing Accessibility and Usability for Physically Handicapped People
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 65.2 In light liquid service (3), Note |
ASTM D2879 |
1986 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(14) |
ASTM E300 |
1986 |
Standard Practice for Sampling Industrial Chemicals
|
ASTM International |