| Environmental Protection Agency |
|
40 CFR 52.742(a)(7) |
ASTM D3980 |
1987 |
Standard Practice for Interlaboratory Testing of Paint and Related Materials
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.19(a) |
Drawing No. SA 103C 002 |
1987 |
Title not specified
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 147.1750(a)(2) |
NDUIC regulations |
1987 |
North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission
|
State of North Dakota |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113 |
Drawing No. 78051-307 |
1987 |
Neck Assembly, revision X
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(e) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Housing and Urban Development Department |
|
24 CFR 200.944(a)(4) |
ASTM D3043 |
1987 |
Standard Methods of Testing Structural Panels in Flexure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.2) |
EPA SW-846 |
1987 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Third Edition
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-104 |
1987 |
Title not specified
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(67) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(c) |
Drawing No. SA-572-S19 |
1987 |
Load-moment Transducer
|
Reprographic Technologies |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 213R |
1987 |
Guide for Structural Lightweight Aggregate Concrete
|
American Concrete Institute |
| Coast Guard |
|
46 CFR 147.7(f)(1) |
UL 30 |
1987 |
Standard for Metal Safety Cans
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
33 CFR 154.106(b)(1) |
API 2000 |
1987 |
Venting Atmospheric and Low-Pressure Storage Tanks
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 147.1450(a)(6) |
NVUIC regulations |
1987 |
Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 522.010 through 522.625, Inclusive. July 22, 1987 (amending NAC Chapter 522).
|
State of Nevada |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-47 |
1987 |
Upper leg assembly, right
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b)(2)(iii) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(94) |
ASTM E776 |
1987 |
Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (18) Nitrate |
WC Method B-1011 |
1987 |
Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography
|
Waters Corp. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA 150 M080 |
1987 |
Right leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(a) |
Drawing No. 127-4000-2 |
1987 |
Leg Assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(e) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xvii) |
USGS Publication |
1987 |
Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Wershaw, R.L., et al, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3
|
U.S. Geological Survey |
| National Highway Traffic Safety Administration |
|
49 CFR 572.152(c)(3)(i) |
Drawing No. 910420-003 |
1987 |
Neck transducer mass simulator
|
Reprographic Technologies |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASME/ANSI A17.1 |
1987 |
Safety Code for Elevators, Dumbwaiters and Moving Walks including the A17.1b Addendum
|
American Society of Mechanical Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 2 |
1987 |
Industry Standard for Wood Windows
|
National Wood Window and Door Association |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(4) |
ASTM D4017 |
1987 |
Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(24) |
SAE J-826 |
1987 |
Devices for Use in Defining and Measuring Vehicle Seating Accommodation
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.20 |
Drawing No. SA 103C 002 |
1987 |
Title not specified
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 147.1750(a)(3) |
NDUIC regulations |
1987 |
North Dakota Administrative Code, Chapter 43-02-03 (General Rules, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission
|
State of North Dakota |
| National Highway Traffic Safety Administration |
|
49 CFR 572.41(a)(6) |
Drawing No. SA 150 M080 |
1987 |
Right leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 799.9120(f)(7) |
OECD No. 402 |
1987 |
Guidelines for Testing of Chemicals, Acute Dermal Toxicity
|
Organization for Economic Cooperation and Development |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M010 |
1987 |
Head assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.113(a)(2) |
Drawing No. 78051-64 |
1987 |
Torque jam nut
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.155(g) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1650 (16.3) |
DIN Method 38 409 |
1987 |
Determination of Adsorbable Organic Halogens (AOX), German Standard Methods for the Analysis of Water, Waste Water and Sludge—General Parameters of Effects and Substances, Part 14
|
Deutsche Industrie Norm |
| Coast Guard |
|
33 CFR 183.5(b) |
UL 1426 |
1987 |
Cables for Boats
|
Underwriters Laboratories, Inc. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.33(b) |
Drawing No. 78051-303 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.121 Table A |
Drawing No. 127-4000 |
1987 |
Leg Assembly
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 164.120-5(d)(9) |
ISO 2039-2:1987(E) |
1987 |
Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition
|
International Organization for Standardization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(2) |
Drawing No. SA-572-S40 |
1987 |
Lower neck force and moment transducer
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 39.1005(c)(1) |
API 2000 |
1987 |
Venting Atmospheric and Low-Pressure Storage Tanks
|
American Petroleum Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(b)(2)(i) |
Drawing No. 78051-319 |
1987 |
Load cell simulator
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(b)(1)(iv) |
Drawing No. SA-572-S11 |
1987 |
Six axis neck transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(c)(2) |
Drawing No. 9000018 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM A505 |
1987 |
Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(6) |
Drawing No. SA 150 M081 |
1987 |
Left Leg Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4013 |
1987 |
Knee machined
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(f) |
Drawing No. SA-572-S15 |
1987 |
Lumbar spine force-moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.152(c)(3)(ii) |
Drawing No. 910420-003 |
1987 |
Neck transducer mass simulator
|
Reprographic Technologies |