| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-396 |
1972 |
Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 147.200(a)(4) |
ARUIC regulations |
1972 |
General Rule and Regulations, Arkansas Oil and Gas Commission (Order No. 2-39, revised July 1972)
|
State of Arkansas |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-S-125B |
1972 |
Screening, Insect, Non-Metallic
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.055-1(a)(1) |
MIL-W-530F |
1972 |
Webbing, Textile, Cotton, General Purpose, Natural and In Colors
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 125.180(b) |
ABYC E-1 |
1972 |
Bonding of Direct-Current Systems
|
American Boat and Yacht Council |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(v)(1) |
ANSI K61.1 |
1972 |
Standard for the Storage and Handling of Anhydrous Ammonia
|
American National Standards Institute |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5190-3A |
1972 |
Model Airport Hazard Zoning Ordinance1
|
Federal Aviation Administration, U.S. Department of Transportation |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A612 |
1972 |
Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(79) |
ASTM D2013 |
1972 |
Standard Method of Preparing Coal Samples for Analysis
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(j)(1) |
AWS B3.0 |
1972 |
Standard Qualification Procedure
|
American Welding Society |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5210-7A |
1972 |
Aircraft Fire and Rescue Communications
|
Federal Aviation Administration, U.S. Department of Transportation |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-394 |
1972 |
Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 147.1150 |
MIUIC regulations |
1972 |
State of Michigan-administered program (Reserved)
|
State of Michigan |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-320a |
1972 |
Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 28.40(b) |
ABYC E-1 |
1972 |
Bonding of Direct Current Systems
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 147.1251(a)(3) |
MSUIC regulations |
1972 |
Mississippi Code Annotated, sections 53-3-1 through 53-3-165, inclusive (1972 and Supp. 1988)
|
State of Mississippi |
| Coast Guard |
|
46 CFR 160.060-1(a)(2) |
MIL-W-530F |
1972 |
Webbing, Textile, Cotton, General Purpose, Natural and In Colors
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 11 |
Industrial Method 129-71W |
1972 |
Fluoride in Water and Wastewater
|
Bran & Luebbe Analyzing Technologies, Inc. |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Coast Guard |
|
46 CFR 160.171-17(o) |
Federal Standard 191A |
1971 |
Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method
|
Federal Specifications Standards and Test Methods |
| Consumer Product Safety Commission |
|
16 CFR 1505.5 Footnote 2 |
NFPA 70 |
1971 |
National Electrical Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 213.1 |
1971 |
Cadmium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-10C |
1971 |
Specification for L-828 Constant Current Regulators
|
Federal Aviation Administration, U.S. Department of Transportation |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-17A |
1971 |
Standby Power for Non-FAA Airport Lighting System
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(6) |
SAE J-236 |
1971 |
Self-Propelled Graders
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-475A |
1971 |
Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2
|
Federal Specifications Standards and Test Methods |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(5) |
RUS Bulletin 50-23 (DT-18) |
1971 |
RUS Specification for 60-inch Wood Crossarm Braces
|
Rural Utilities Service, U.S. Department of Agriculture |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(17) |
ANSI J6.1 |
1971 |
Rubber Insulating Line Hose
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.040-1(a)(2) |
MIL-R-45505A |
1971 |
Line Throwing Apparatuses, Rocket and Projectile Units
|
U.S. Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(7) |
SAE J-237 |
1971 |
Front End Loaders and Dozers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(79) |
ANSI Z89.2 |
1971 |
Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(18) |
ANSI J6.2 |
1971 |
Rubber Insulating Hoods
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(1) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(8) |
SAE J-319b |
1971 |
Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(12) |
RUS Bulletin 345-184, Form 397e |
1971 |
Specifications for Mobile and Fixed Dial Radio Telephone Equipment
|
Rural Utilities Service, U.S. Department of Agriculture |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(19) |
ANSI J6.4 |
1971 |
Rubber Insulating Blankets
|
American National Standards Institute |
| Nuclear Regulatory Commission |
|
10 CFR 50.55a(h)(1) |
IEEE 279 |
1971 |
Criteria for Protection Systems for Nuclear Generating Stations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(Q) |
EPA Method 352.1 |
1971 |
Nitrogen, Nitrate, Colorimetric, Brucine
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(9) |
SAE J-320a |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(20) |
ANSI J6.5 |
1971 |
Rubber Insulating Sleeves
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(2) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5370-7 |
1971 |
Airport Construction Controls to Prevent Air Water Pollution
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (6) |
EPA Method 239.1 |
1971 |
Lead (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(B) |
EPA Method 130.1 |
1971 |
Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 169.115(c)(4) |
FedSpec ZZ-H-451F |
1971 |
Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (7) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec HH-I-529B |
1971 |
Insulation Board, Thermal (Mineral Aggregate)
|
Federal Specifications Standards and Test Methods |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-21 |
1971 |
Airport Miscellaneous Lighting Visual Aids
|
Federal Aviation Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.21(d) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 22 |
1971 |
Standard for Water Tanks for Private Fire Protection
|
National Fire Protection Association |