| Environmental Protection Agency |
89 FR 16820 |
40 CFR 60 |
ASTM D4891-89(2006) |
1989 |
Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sources: Oil and Natural Gas Sector Climate Review
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 59.412(b)(2) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
|
ASTM International |
| Coast Guard |
|
46 CFR 181.320(b)(3) |
NFPA 1963 |
1989 |
Fire Hose Connections
|
National Fire Protection Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM D3656 |
1989 |
Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(g)(4)(iii)(B)(3) |
ASTM D4891 |
1989 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1625(b)(10) |
CAARB Method 429 |
1989 |
Determination of Polycyclic Aromatic Hydrocarbon (PAH) Emissions from Stationary Sources, amended July 28, 1997
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart Q |
1989 |
Administrative Code, Excluding sections 215.432 and 215.436
|
State of Illinois |
| Coast Guard |
|
21 CFR 173.357(a)(2) |
FDA Publication |
1989 |
Methodology for Ethylene-dichloride Detection in Polyethylenimine
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Rural Utilities Service |
|
7 CFR 1755.860(a)(6) |
ASTM D1248 |
1989 |
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
|
ASTM International |
| Coast Guard |
|
46 CFR 57.02-2(a)(1) |
ASME B&PV Code |
1989 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.14(d)(1) |
API 2517 |
1989 |
Evaporative Loss from External Floating-Roof Tanks, Third Edition
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Note 4 |
USGS Publication |
1989 |
Techniques of Water-Resource Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples
|
U.S. Geological Survey |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASME A112.18.1M |
1989 |
Plumbing Fixture Fittings
|
American Society of Mechanical Engineers |
| Rural Utilities Service |
|
7 CFR 1755.870(a)(6) |
ASTM D2633 |
1989 |
Standard Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1700(a)(2) |
NCUIC regulations |
1989 |
North Carolina Well Construction Act, N.C. GEN. STAT. §§ 87-83 through 87-99 (1989 and Cumm. Supp. 1989)
|
State of North Carolina |
| Environmental Protection Agency |
|
40 CFR 141.21(f)(3) Note 8 |
ONPG-MUG Test |
1989 |
Autoanalysis Colilert System
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 199.70(b)(3)(ii) |
IMO Resolution A.658(16) |
1989 |
Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) |
ASTM D396 |
1989 |
Standard Specification for Fuel Oils
|
ASTM International |
| Coast Guard |
|
46 CFR 97.01-2(b) |
IMO Resolution A.654(16) |
1989 |
Graphical Symbols for Fire Control Plans
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(39) |
ASTM D396 |
1989 |
Standard Specification for Fuel Oils
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 177.1040(c) Footnote 1 |
FDA Publication |
1989 |
Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 125.180(b) |
IMO Resolution A.658(16) |
1989 |
Use and Fitting of Retro-Reflective Materials on Life-saving Appliances
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 59.508(b) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 76.4(b)(2) |
ASTM D3172 |
1989 |
Standard Practice for Proximate Analysis of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1401(a)(2) |
NEUIC regulations |
1989 |
Nebraska Dept. of Environmental Control, Title 122, Rules and Regulations for Underground Injection and Mineral Production Wells, February 16, 1982; Amended Dates, November 12, 1983, March 22, 1984; amendment approved by the Governor on January 2, 1989
|
State of Nebraska |
| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215 |
1989 |
Administrative Code, Subpart S
|
State of Illinois |
| Environmental Protection Agency |
|
40 CFR 799.9430(h)(1) |
EPA-50-6-89-002 |
1989 |
Summary of the EPA Workshop on Carcinogenesis Bioassay via the Dermal Route
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(24) |
EPA-520-1-89-009 |
1989 |
Indoor Radon and Radon Decay Product Measurement Protocols
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 57.02-2(b) |
ASME B&PV Code |
1989 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
|
American Society of Mechanical Engineers |
| Federal Aviation Administration |
|
14 CFR 135.168(F)(2)(i) |
RTCA DO-204 |
1989 |
Minimum Operational Performance Standards (MOPS) 406 MHz Emergency Locator Transmitters (ELTs)
|
Radio Technical Commission for Aeronautics |
| Housing and Urban Development Department |
|
24 CFR 200.944(a)(4) |
APA Form E30K |
1989 |
APA Design/Construction Guide, Residential and Commercial
|
APA--The Engineered Wood Association |
| Environmental Protection Agency |
|
40 CFR 63.772(h)(4)(iii)(B)(3) |
ASTM D4891 |
1989 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.21(f)(3) |
ONPG-MUG Test |
1989 |
Autoanalysis Colilert System
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.1050(a)(2) |
MDUIC regulations |
1989 |
Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 01, promulgated and effective as of March 1, 1989
|
State of Maryland |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM E84 |
1989 |
Standard Test Method for Surface Burning Characteristics of Building Materials
|
ASTM International |
| Coast Guard |
|
46 CFR 28.40(b) |
NFPA 302 |
1989 |
Pleasure and Commercial Motor Craft
|
National Fire Protection Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM D2321 |
1989 |
Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
|
ASTM International |
| Coast Guard |
|
46 CFR 199.175(b)(15) |
IMO Resolution A.657(16) |
1989 |
Instructions for Action in Survival Craft
|
International Maritime Organization |
| Food and Drug Administration |
|
21 CFR 177.1020(c)(2) |
FDA Publication |
1989 |
Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(10) |
ASTM D1331 |
1989 |
Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 0, Footnote 1 |
SAE J-1990 |
1989 |
Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 147.1751(b)(3) |
NDUIC regulations |
1989 |
North Dakota Century Code Chapter 61-28 (Control, Prevention and Abatement of Pollution of Surface Waters)
|
State of North Dakota |
| Coast Guard |
|
46 CFR 182.420(c) |
ABYC P-4 |
1989 |
Marine Inboard Engines
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 110.10-1(n)(2) |
MIL-HDBK-299(SH) |
1989 |
Military Handbook Cable Comparison Handbook Data Pertaining to Electric Shipboard Cable Notice 1-1991 (Revision of MIL-HDBK-299(SH))
|
Naval Sea Systems Command |
| Coast Guard |
|
21 CFR 177.1020(b) |
FDA Publication |
1989 |
Analysis of Cycopaco Resin for Residual b-(2-Hydroxyethyl mercapto) propionitrile
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Environmental Protection Agency |
|
40 CFR 80.125(d)(2) |
IIA Publication |
1989 |
Codification of Standards for the Professional Practice of Internal Auditing
|
Institute of Internal Auditors |
| Coast Guard |
|
46 CFR 28.40(b) |
IMO Resolution A.658(16) |
1989 |
Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart V |
1989 |
Administrative Code
|
State of Illinois |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/BHMA A156.2 |
1989 |
Standard for Bored and Preassembled Locks and Latches
|
Builders Hardware Manufacturers Association |
| Coast Guard |
|
46 CFR 185.604(h) |
IMO Resolution A.658(16) |
1989 |
Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances
|
International Maritime Organization |