| National Highway Traffic Safety Administration |
|
49 CFR 572.146(d) |
Drawing No. 210-3800 |
1994 |
No title given
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.170(c)(2) |
SAE J-1733 |
1994 |
Sign Convention for Vehicle Crash Testing
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (22) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1068 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(3)(ii)(E) |
EPA Method 245.1 |
1994 |
Determination of Mercury in Water by Cold Vapor Atomic Absorption Spectrometry. Revision 3.0
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.123(c)(2) |
Drawing No. 127-1016 |
1994 |
Neck cable
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (2) Antimony |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.134(b)(1) |
Drawing No. SA-572-S5 |
1994 |
Chest deflection transducer
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(j) |
Drawing No. 210-4540-1 |
1994 |
No title given
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 282.66(d)(1)(i)(B) |
KSUSTP |
1994 |
Kansas Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Kansas |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
EPA SW-846-5050 |
1994 |
Bomb Preparation Method for Solid Waste, Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 86 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(77) |
ASTM D1946 |
1994 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1037 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Coast Guard |
|
21 CFR 101.4(h)(2) |
IAPT Publication |
1994 |
International Code of Botanical Nomenclature
|
International Association for Plant Taxonomy |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(f) |
Drawing No. 78051-342 |
1994 |
Title not specified
|
General Motors Corporation |
| Coast Guard |
|
46 CFR 30.10-22(b)(Note 1) |
ASTM D323 |
1994 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM International |
| Coast Guard |
|
46 CFR 160.171-3(b) |
ASTM D1004 |
1994 |
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(17) |
EPA SW-846-9076 |
1994 |
Test Method for Total Chlorine in New and Used Petroleum Products by Oxidative Combustion and Microcoulometry, Revision 0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (1) |
EPA Method 200.7 |
1994 |
Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (10) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix D, 6.0(9) |
EPA-454-B-93-051 |
1994 |
Photochemical Assessment Monitoring Stations Implementation Manual
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 430.3(c)(9) |
ANSI C79.1 |
1994 |
Nomenclature for Glass Bulbs Intended for Use with Electric Lamps
|
American National Standards Institute |
| Mine Safety and Health Administration |
|
30 CFR 56.14130(j) |
SAE J-1194 |
1994 |
Roll-Over Protective Structures for Wheeled Agricultural Tractors
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.180(a)(5) |
SAE J-1733 |
1994 |
Sign Convention for Vehicle Crash Testing
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1048.810(c)(1) |
ISO 9141-2 |
1994 |
Road vehicles-Diagnostic systems—Part 2: CARB requirements for interchange of digital information
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (20) |
3M Test Method 0222 |
1994 |
Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk
|
3M Corporation |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1045 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1030 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (20) |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption, Revision 2.2
|
U.S. Environmental Protection Agency |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CGA C-12 |
1994 |
Qualification Procedure for Acetylene Cylinder Design
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (16) Mercury |
EPA Method 245.1 |
1994 |
Mercury by Cold Vapor Atomic Absorption
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
EPA SW-846-7060A |
1994 |
Arsenic (Atomic Absorption, Furnace Technique), Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1036 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (6) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b) Appendix (3) |
ASTM Annual Book of Standards |
1994 |
ASTM Annual Book of Standards, Vol. 11.01
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (13) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.10906 Free liquids |
EPA Method 9095B |
1994 |
Paint Filter Liquids Test, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (31) |
OIA Method PAI-DK01 |
1994 |
Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Tritrimetric Detection)
|
OI Analytical |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CGA C-3 |
1994 |
Standards for Welding on Thin-Walled Steel Cylinders
|
Compressed Gas Association |
| National Highway Traffic Safety Administration |
|
49 CFR 572.124(a) |
Drawing No. 127-2000 |
1994 |
Upper Torso Assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(j) |
Drawing No. 210-4540-2 |
1994 |
No title given
|
Reprographic Technologies |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(5) |
API MPMS |
1994 |
Chapter 1
|
American Petroleum Institute |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 59 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 10 |
EPA Method 100.2 |
1994 |
Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(f) |
Drawing No. 78051-317 |
1994 |
Chest deflection transducer assembly
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (4) Asbestos |
EPA Method 100.2 |
1994 |
Determination of Asbestos Structure Over 10-?m In Length In Drinking Water, EPA-600-R-94-134
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 30.10-22(c)(Note 1) |
ASTM D323 |
1994 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (1) |
EPA Method 200.8 |
1994 |
Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(2) Table Note 1 |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |