| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (63) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 62.15130(c)(2) |
ASME QRO-1 |
1994 |
Standard for the Qualification and Certification of Resource Recovery Facility Operators
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 141.24(e)(1) |
EPA-600-R-94-173 |
1994 |
Technical Notes on Drinking Water Methods
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(9) |
Drawing No. SA-SID-M050 |
1994 |
Lumbar Spine Assembly, Revision A
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.145(c)(2)(i) |
Drawing No. 210-4510 |
1994 |
Structural replacement to the pelvis weldment
|
Reprographic Technologies |
| Transportation Department |
89 FR 15636 |
49 CFR 107 |
CGA C-12 |
1994 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (34) |
3M Test Method 0222 |
1994 |
Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk
|
3M Corporation |
| Research and Special Programs Administration |
|
21 CFR 172.105(b)(3) |
FDA Publication |
1994 |
Total Phenols
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(54) |
ASTM D4256 |
1994 |
Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(vi) |
USGS Open File Report (OFR) 94-37 |
1994 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory--Determination of Triazine and Other Nitrogen-containing Compounds by Gas Chromatography with Nitrogen Phosphorus Detectors
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (12) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (3) Arsenic |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (9) Chromium |
EPA Method 200.7 |
1994 |
ICP - metals
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 13 |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption, Revision 2.2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1043 |
SAE J2071_199406 |
1994 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(g) |
Drawing No. SA-572-S20 |
1994 |
Lumbar spine force/moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Agricultural Marketing Service |
|
7 CFR 51.888(a) |
AZ State Regulations |
1994 |
Citrus, Fruit Standards, Chapter 4--Plant Services Division, Article 7, Fruit And Vegetable Standardization, Section R3-4-733 Table Grape Standards
|
State of Arizona, Department of Agriculture |
| Coast Guard |
|
46 CFR 184.240(n) |
NFPA 302 |
1994 |
Fire Protection Standard for Pleasure and Commercial Motor Craft
|
National Fire Protection Association |
| Federal Highway Administration |
|
23 CFR 625.4(b)(5) |
AASHTO Publication |
1994 |
AASHTO LRFD Bridge Design Specifications, 1st Edition, U.S. Units
|
American Association of State Highway and Transportation Officials |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(m)(2) |
ANSI/AWS D14.3 |
1994 |
Specification for Welding Earthmoving and Construction Equipment
|
American Welding Society |
| Coast Guard |
|
46 CFR 114.600(b) |
NFPA 261 |
1994 |
Test For Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 29440 |
40 CFR 86 |
NIST Technical Note 1297 |
1994 |
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 200.7 |
1994 |
Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(c) |
Drawing No. 78051-136 |
1994 |
Title not specified
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 200.8 |
1994 |
Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.111(a)(4) |
Drawing No. SA 150 M050 |
1994 |
Lumbar Spine Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.125(a) |
Drawing No. 127-8210 |
1994 |
Abdominal insert
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(3) |
ASME MFC-5M |
1994 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 1065.705 Table 1 |
ISO 3016 |
1994 |
Petroleum products--Determination of pour point
|
International Organization for Standardization |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C3 |
ASTM A333/A 333M |
1994 |
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Zinc) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M060 |
1994 |
Pelvis and abdomen assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 114.600(b) |
UL 1453 |
1994 |
Electric Booster and Commercial Storage Tank Water Heaters
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (52) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (70) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table Note (7) |
EPA Method 200.8 |
1994 |
Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFr 572.137(l) |
Drawing No. SA-572-S28 |
1994 |
Thoracic spine force/moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ASTM A370 |
1994 |
Standard Test Method and Definitions for Mechanical Testing of Steel Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(27)(iii) |
OIA Method PAI-DK02 |
1994 |
Nitrogen, Total Kjeldahl, Block Digestion, Steam Distillation, Colorimetric Detection
|
OI Analytical |
| Housing and Urban Development Department |
|
24 CFR 200.946(a)(2) |
ASTM C150 |
1994 |
Standard Specification for Portland Cement
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 278.3(b)(1) |
EPA Method 1312 |
1994 |
Synthetic Precipitation Leaching Procedure
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(7) |
API MPMS |
1994 |
Chapter 1—Vocabulary
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (26) Thallium |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(2) |
ISO 7827:1994(E) |
1994 |
Water Quality—Evaluation in an Aqueous Medium of the Ultimate Aerobic Biodegradability of Organic Compounds—Method by Analysis of Dissolved Organic Carbon (DOC). Second Edition
|
International Organization for Standardization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(8) |
Drawing No. SA-SID-M030 |
1994 |
Thorax Assembly, Complete, Revision A
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 63.7732(g)(1)(v) |
NIOSH Method 2010 |
1994 |
Amines, Aliphatic, Issue 2
|
National Institute for Occupational Safety and Health |
| National Highway Traffic Safety Administration |
|
49 CFR 572.145(c)(3)(i) |
Drawing No. 210-8020 |
1994 |
Upper backplate of the spine box weldment
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC Footnote 8 |
3M Test Method 0222 |
1994 |
Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk
|
3M Corporation |