| Environmental Protection Agency |
|
40 CFR 258.28(c)(1) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9095B
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(55) |
ISO 10417: 2004 |
2004 |
Petroleum and natural gas industries—Subsurface safety valve systems—Design, installation, operation and redress
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 53.01-10(e)(1) |
ASME B&PV Code |
2004 |
Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(g)(1) |
ISO 3170 |
2004 |
Petroleum liquids—Manual sampling—Third Edition
|
International Organization for Standardization |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E5 |
ASTM A671 |
2004 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(69) |
API Spec. 2C |
2004 |
Specifications for Offshore Cranes
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21977 |
30 CFR 250.730 (a)(2)(iv) |
API Spec. 16D |
2004 |
Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Federal Communications Commission |
90 FR 38045 |
47 CFR 2 |
ISO/IEC 17011:2004(E) |
2004 |
Promoting the Integrity and Security of Telecommunications Certification Bodies, Measurement Facilities, and the Equipment Authorization Program
|
International Organization for Standardization / International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 98.354(h)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(xx) |
EPA Method 1310B |
2004 |
Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test (and in Basic Manual Update IIIB)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (71) |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 72.13(a)(5) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.41da Lignite |
ASTM D388 |
2004 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, C3 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C6 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C2 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(2) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(1)(vii) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Coast Guard |
|
46 CFR 53.05-1(a) |
ASME B&PV Code |
2004 |
Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) B1 |
API 5L |
2004 |
Specification for Line Pipe
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(vi) |
ASTM D512 |
2004 |
Standard Test Methods for Chloride Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(a) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.41da Bituminous coal |
ASTM D388 |
2004 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (19) |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xvii) |
ISO 3170 |
2004 |
Petroleum liquids—Manual sampling—Third Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(xxi) |
EPA Method 9010C |
2004 |
Total and Amenable Cyanide: Distillation (and in Basic Manual Update IIIB)
|
U.S. Environmental Protection Agency |
| Federal Railroad Administration |
|
49 CFR 227 Appendix D B |
ANSI S1.11 |
2004 |
Specification for Octave, Half-Octave, and Third Octave Band Filter Sets
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 799.9430(h)(11) |
EPA Report 20T-004 |
2004 |
The Atlas Of Dermal Lesions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.772(a)(1)(ii) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(14) |
ASTM D2502 |
2004 |
Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils From Viscosity Measurements
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B36.10M |
2004 |
Welded and Seamless Wrought Steel Pipe
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1433(b)(1) |
ANSI B30.5, 5-1.1.1 |
2004 |
Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs)
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(k)(1)(iv) |
EPA Method 9095B |
2004 |
Paint Filter Liquids Test, Revison 2
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 172.841(b) |
Food Chemicals Codex |
2004 |
Polydextrose
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Table 2, (2)(b) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1341 Total organic HAP |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Transportation Department |
89 FR 15636 |
49 CFR 172 |
CGA P-20 |
2003 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Coast Guard |
|
46 CFR 56.30-10(b)(2) |
ASME B16.5 |
2003 |
Pipe Flanges and Flanged Fittings NPS 1/2 through NPS 24 Metric/Inch Standard
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 1060.810(b) Table 2 |
SAE J-2659 |
2003 |
Test Method to Measure Fluid Permeation of Polymeric Materials by Speciation
|
Society of Automotive Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ANSI/ISA–RP12.06.01–2003 |
2003 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(liv) |
ASTM D4839 |
2003 |
Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.107a(d)(7)(iii) |
ASTM D1945 |
2003 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1433(c)(1)(ii) |
SAE J-987 |
2003 |
Lattice Boom Cranes—Method of Test
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 63.11120(a)(1)(i) |
CAARB Vapor Recovery Test Procedure TP-201.1E |
2003 |
Leak Rate and Cracking Pressure of Pressure/Vacuum Vent Valves
|
California Air Resources Board |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 2 |
SCTE 41 2003 (formerly DVS 301) |
2003 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Society of Cable Telecommunications Engineers |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 73 |
SCTE 40 2003 (formerly DVS 313) |
2003 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Society of Cable Telecommunications Engineers |
| Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(ii) |
ASTM D1826 |
2003 |
Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1926.100(b)(3) |
ANSI Z89.1 |
2003 |
Safety Requirements for Industrial Head Protection
|
American National Standards Institute |