| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (32) |
ASTM D4190 |
2008 |
Metals by Direct Current Plasma
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1066 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Energy Department |
85 FR 56475 |
10 CFR 429 |
ANSI C82.1-2004 (R2008) |
2008 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
American National Standards Institute |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11117:2008/Cor.1:2009 |
2008 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (75) |
ASTM D4190 |
2008 |
Metals by Direct Current Plasma
|
ASTM International |
| Coast Guard |
|
46 CFR 160.156-7(b)(26) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Environmental Protection Agency |
|
40 CFR 1043.80(b)(9 |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14
|
International Maritime Organization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1060 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Coast Guard |
|
46 CFR 160.133-15(e) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Coast Guard |
|
46 CFR 160.156-5(b)(5) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(f)(1) |
NIST Special Publication 811 |
2008 |
Guide for the Use of the International System of Units (SI)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 98.253(n) |
EPA AP 42, Section 5.2 |
2008 |
Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.274(b)(3) |
ASTM D5373 |
2008 |
Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Transportation Department |
87 FR 79752 |
49 CFR 171 |
ISO 4706:2008(E) |
2008 |
Hazardous Materials: Editorial Corrections and Clarifications
|
International Organization for Standardization |
| Transportation Department |
89 FR 92296 |
14 CFR 135 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 1066.301(b) |
SAE J-2263 |
2008 |
Road Load Measurement Using Onboard Anemometry and Coastdown Techniques
|
Society of Automotive Engineers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
ISO 13837:2008(E) |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(8) |
EPA Publication |
2008 |
Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 160.151-15(e) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Transportation Department |
89 FR 92296 |
14 CFR 141 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xxvi) |
ASTM D1886 |
2008 |
Standard Test Methods for Nickel in Water
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1090 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1782 |
2008 |
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1066 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 63.11646(a)(1)(vi) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Coast Guard |
|
14 CFR 34.1 Characteristic level Footnote 1 |
ICAO Annex 16 |
2008 |
Environmental Protection, Appendix 6
|
International Civil Aviation Organization |
| Coast Guard |
|
46 CFR 160.135-7(b)(3)(ii) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1054 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Coast Guard |
|
46 CFR 160.156-7(b)(3)(ii) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.41c Distillate oil |
ASTM D975 |
2008 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Coast Guard |
|
46 CFR 162.161-6(a) |
IMO MSC.1/Circ. 1267 |
2008 |
Amendments to Revised Guidelines for the Approval of Equivalent Fixed Gas Fire-Extinguishing Systems, as Referred to in SOLAS 74, for Machinery Spaces and Cargo Pump-Rooms (MSC/Circ. 848)
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xli) |
ASTM D3559 |
2008 |
Standard Test Methods for Lead in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.30(d) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13
|
International Maritime Organization |
| National Highway Traffic Safety Administration |
|
49 CFR 562.3 |
ANSI/ASAE 390.4 |
2008 |
Definitions and Classifications of Agricultural Field Equipment
|
American Society of Agricultural Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(i)(5) |
ASTM C595 |
2008 |
Blended Hydraulic Cements
|
ASTM International |
| Coast Guard |
|
46 CFR 160.151-5(c)(1) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Environmental Protection Agency |
|
40 CFR 131.44(b)(2) |
Florida Statute, Title 28, Section 373.4592 |
2008 |
Everglades improvement and management
|
State of Florida |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 13, 17(c) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1042 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 80.1468(b)(3) |
ASTM D4444 |
2008 |
Standard Test Method for Use and Calibration of Hand-Held Moisture Meters
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.74(c)(8) |
ASTM D5373 |
2008 |
Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(1)(iv) |
ASTM D695 |
2008 |
Standard Test Method for Compressive Properties of Rigid Plastics
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 1043.80(b)(9) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 18
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 98.7(h)(1) |
NLA Publication |
2008 |
CO2 Emissions Calculation Protocol for the Lime Industry—English Units Version, February 5, 2008 Revision
|
National Lime Association |
| Coast Guard |
|
46 CFR 160.135-15(e)(1)(vi) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-5(b)(6) |
ASTM D792 |
2008 |
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(2)(iii) |
ASTM D638 |
2008 |
Standard Test Method for Tensile Properties of Plastics
|
ASTM International |