| National Highway Traffic Safety Administration |
|
49 CFR 562.3 |
ANSI/ASAE 390.4 |
2008 |
Definitions and Classifications of Agricultural Field Equipment
|
American Society of Agricultural Engineers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1042 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(9) |
EPA AP 42, Section 5.2 |
2008 |
AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(81) |
API MPMS |
2008 |
Chapter 5—Metering, Section 6—Measurement of Liquid Hydrocarbons by Coriolis Meters; First Edition
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 160.132-5(b)(1) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(3) |
AWPA A3 |
2008 |
Standard Methods for Determining Penetration of Preservatives and Fire Retardants
|
American Wood Protection Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xlv) |
ASTM D3859 |
2008 |
Standard Test Methods for Selenium in Water
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Veterans Affairs Department |
|
38 CFR 17.1(b)(8) |
NFPA 30 |
2008 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(e) |
ASTM D3173 |
2008 |
Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.41(b)(2) |
IMO Publication |
2008 |
NOX Technical Code
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
ISO 13837:2008(E) |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 160.135-7(b)(3)(ii) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 232.603(a)(8) |
AAR S-4270 |
2008 |
ECP Brake System Configuration Management
|
Association of American Railroads |
| Transportation Department |
89 FR 92296 |
14 CFR 111 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 162.161-6(a) |
IMO MSC.1/Circ. 1267 |
2008 |
Amendments to Revised Guidelines for the Approval of Equivalent Fixed Gas Fire-Extinguishing Systems, as Referred to in SOLAS 74, for Machinery Spaces and Cargo Pump-Rooms (MSC/Circ. 848)
|
International Maritime Organization |
| Transportation Department |
89 FR 92296 |
14 CFR 91 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(i)(5) |
ASTM C595 |
2008 |
Blended Hydraulic Cements
|
ASTM International |
| Coast Guard |
|
46 CFR 160.151-5(c)(1) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Environmental Protection Agency |
|
40 CFR 1045.110(g) |
SAE J-1939 |
2008 |
Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide
|
Society of Automotive Engineers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1033 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart LLLL, Table 2, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 62.16050 Table 2 |
ASTM D6784-02 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 73 |
TP-ATP-M-UDCP-I05-20080304 |
2008 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Cable Television Laboratories, Inc. |
| Coast Guard |
|
46 CFR 160.135-15(e)(1)(vi) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Coast Guard |
|
46 CFR 160.156-5(b)(7) |
ASTM D638 |
2008 |
Standard Test Method for Tensile Properties of Plastics
|
ASTM International |
| Coast Guard |
|
46 CFR 160.156-15(e)(1)(iii) |
ASTM D2584 |
2008 |
Standard Test Method of Ignition Loss for Cured Reinforced Resins
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ICAO Publication |
2008 |
Technical Instructions for the Safe Transport of Dangerous Goods by Air
|
International Civil Aviation Organization |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xii) |
ASTM D6609 |
2008 |
Standard Guide for Part-Stream Sampling of Coal 2008
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-5(b)(7) |
ASTM D1045 |
2008 |
Standard Test Methods of Sampling and Testing Plasticizers used in Plastics
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.1(e) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI
|
International Maritime Organization |
| National Highway Traffic Safety Administration |
|
49 CFR 562.7 |
ANSI/ASAE 279.14 |
2008 |
Lighting and Marking of Agricultural Equipment on Highways
|
American Society of Agricultural Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(x)(1) |
ISO 11660-1:2008(E) |
2008 |
Cranes—Access, guards and restraints—Part 1: General, 2d ed.
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (23) |
ASTM D7284 |
2008 |
Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11647(a)(3)(ii) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1068 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Coast Guard |
|
46 CFR 160.132-5(b)(2) |
ASTM A216/A 216M |
2008 |
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 232.603(a) |
AAR S-4200 |
2008 |
Electronically Controlled Pneumatic (ECP) Cable-Based Brake Systems—Performance Requirements
|
Association of American Railroads |
| Environmental Protection Agency |
|
40 CFR 1043.41(h)(2) |
IMO Publication |
2008 |
NOX Technical Code
|
International Maritime Organization |
| Coast Guard |
|
33 CFR 154.106(g)(2) |
NFPA 70 |
2008 |
National Electrical Code
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 139.130(b)(3) |
ISO 9001:2008(E) |
2008 |
International Standard: Quality management systems—Requirements
|
International Organization for Standardization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1043 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1031 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Coast Guard |
|
46 CFR 160.135-7(b)(3)(ii) |
ASTM A276 |
2008 |
Standard Specification for Stainless Steel Bars and Shapes
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
ISO 13837:2008(E) |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 60.2730(j) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Transportation Department |
89 FR 92296 |
14 CFR 135 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(1)(iii) |
ASTM D1045 |
2008 |
Standard Test Methods of Sampling and Testing Plasticizers used in Plastics
|
ASTM International |
| Transportation Department |
89 FR 92296 |
14 CFR 61 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |