| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
ASTM D93–13 |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
CARB OBD–II, 13 CCR 1968.2, Title 13, California Code of Regulations |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
State of California, California Air Resources Board |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
MSS SP–9–2013 |
2013 |
Updates to Marine Engineering Standards
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Environmental Protection Agency |
|
40 CFR 80.47(k)(4) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.1454(l) |
ASTM D975 |
2013 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Federal Aviation Administration |
|
14 CFR 71.51 |
FAA Order 7400.9X |
2013 |
Airspace Designations and Reporting Points
|
Federal Aviation Administration, U.S. Department of Transportation |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
DOD MIL Specs |
2013 |
All military specifications, standards and codes without specific reference
|
U.S. Department of Defense |
| Transportation Department |
89 FR 15636 |
49 CFR 107 |
CGA S-7:2013 |
2013 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Coast Guard |
|
46 CFR 197.300(d) |
ANSI B31.1 |
2013 |
Code for Pressure Piping
|
American National Standards Institute |
| Environmental Protection Agency |
85 FR 63394 |
40 CFR 60 |
ISO 10715 |
2013 |
Test Methods and Performance Specifications for Air Emission Sources
|
International Organization for Standardization |
| Housing and Urban Development Department |
|
24 CFR 200.929(b)(2) |
HUD MPS |
2013 |
Minimum Property Standards One and Two Family Dwellings
|
U.S. Department of Housing and Urban Development |
| Occupational Safety and Health Administration |
|
29 CFR 1917.45(f)(5)(ii) |
49 CFR 571.210 |
2013 |
Seat belt assembly anchorages
|
U.S. Department of Transportation |
| Interior Department |
88 FR 39514 |
43 CFR 3170 |
API RP 49 |
2013 |
Onshore Oil and Gas Operations; Federal and Indian Oil and Gas Leases; Codification of Onshore Orders 1, 2, 6, and 7
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(73) |
API RP 17H |
2013 |
Remotely Operated Tools and Interfaces on Subsea Production Systems
|
American Petroleum Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(k) |
Part No. 880105-000 |
2013 |
Parts List and Drawings, Part 572 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (HIII-5F, Alpha Version)
|
Reprographic Technologies |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
ASTM D3231–13 |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Homeland Security Department |
86 FR 58560 |
46 CFR 25 |
NFPA 10 |
2013 |
Fire Protection for Recreational Vessels
|
National Fire Protection Association |
| Transportation Department |
89 FR 15636 |
49 CFR 107 |
CGA C-6.3:2013 |
2013 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 63.1625(b)(9)(v) |
ASTM D7520 |
2013 |
Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere
|
ASTM International |
| Health and Human Services Department |
87 FR 47038 |
42 CFR 412 |
TEFCA Version 1 |
2013 |
Medicare Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal Year 2023 and Updates to the IRF Quality Reporting Program
|
Office of the National Coordinator for Health Information Technology |
| Environmental Protection Agency |
|
40 CFR 80.46(h)(1)(xvi) |
ASTM D7039 |
2013 |
Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.177(a)(5) |
ASTM D4814 |
2013 |
Standard Specification for Automotive Spark-Ignition Engine Fuel
|
ASTM International |
| Federal Trade Commission |
85 FR 20788 |
16 CFR 460.5 (e)(2)(i) |
ASTM C177-13 |
2013 |
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(12) |
ASTM D1655 |
2013 |
Standard Specification for Aviation Turbine Fuels
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 3280.4(a) |
NFRC All Standards |
2013 |
All specifications, standards, and codes without specific reference
|
National Fenestration Rating Council |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1043 |
SAE J2966_201309 |
2013 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Transportation Department |
89 FR 15636 |
49 CFR 178 |
CGA C-6.1:2013 |
2013 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Energy Department |
87 FR 45164 |
10 CFR 431 |
ANSI/ASHRAE Standard 198-2013 |
2013 |
Energy Conservation Program: Test Procedure for Direct Expansion-Dedicated Outdoor Air Systems
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 80.47(r)(1)(viii) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 390 |
2013 |
Federal Motor Carrier Safety Regulations, General
|
Federal Motor Carrier Safety Administration, Department of Transportation |
| Housing and Urban Development Department |
|
24 CFR 3285.4(b)(1) |
ACCA Manual J |
2013 |
Residential Load Calculation, 8th Edition
|
Air Conditioning Contractors of America |
| Transportation Department |
87 FR 44944 |
49 CFR 176 |
ISO 11119-3:2013(E) |
2013 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
EPA SW-846-3050 |
2013 |
Acid Digestion of Sediments, Sludges, and Soils
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
ASTM D93–13 |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
CARB OBD–II, 13 CCR 1968.2, Title 13, California Code of Regulations |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
State of California, California Air Resources Board |
| Environmental Protection Agency |
85 FR 78412 |
40 CFR 1042 |
ASTM D93-13 |
2013 |
Fuels Regulatory Streamlining
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.47(l)(3) |
ASTM D6708 |
2013 |
Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
|
ASTM International |
| Federal Aviation Administration |
|
24 CFR 200.927 |
HUD MPS |
2013 |
Minimum Property Standards as contained in the handbooks identified in 24 CFR 200.929(b)
|
U.S. Department of Housing and Urban Development |
| Federal Aviation Administration |
|
14 CFR 71.61 |
FAA Order 7400.9X |
2013 |
Airspace Designations and Reporting Points
|
Federal Aviation Administration, U.S. Department of Transportation |
| Energy Department |
87 FR 30775 |
10 CFR 430 |
UL 896-2016 |
2013 |
Energy Conservation Program: Test Procedures for Direct Heating Equipment
|
Underwriters Laboratories, Inc. |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
UL 343 |
2013 |
Updates to Marine Engineering Standards
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 80.47(o)(2)(iii) |
ASTM D6792 |
2013 |
Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
|
ASTM International |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 10462:2013(E) |
2013 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 147.2150 |
TNUIC regulations |
2013 |
State-administered program (Reserved)
|
State of Tennessee |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1048 |
SAE J2841_200903 |
2013 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
ASTM D3231–13 |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1068 |
ASTM D3231–13 |
2013 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(5) |
ASTM D613 |
2013 |
Standard Test Method for Cetane Number of Diesel Fuel Oil
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(20) |
ASTM D2699 |
2013 |
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
|
ASTM International |
| Transportation Department |
85 FR 75680 |
49 CFR 180 |
CGA C-6.3 |
2013 |
Hazardous Materials: Adoption of Miscellaneous Petitions To Reduce Regulatory Burdens
|
Compressed Gas Association |