| Mine Safety and Health Administration |
|
30 CFR 71.700(a) |
ACGIH Publication |
1972 |
Threshold Limit Values for Substance in Workroom Air
|
American Conference of Governmental Industrial Hygienists |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-395 |
1972 |
Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 11 |
Industrial Method 129-71W |
1972 |
Fluoride in Water and Wastewater
|
Bran & Luebbe Analyzing Technologies, Inc. |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (13) Fluoride |
Industrial Method 129-71W |
1972 |
Fluoride in Water and Wastewater
|
Bran & Luebbe Analyzing Technologies, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(1)(ii) |
ANSI A14.2 |
1972 |
Safety Requirements for Portable Metal Ladders
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.060-1(a)(2) |
MIL-W-530F |
1972 |
Webbing, Textile, Cotton, General Purpose, Natural and In Colors
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(79) |
ASTM D2013 |
1972 |
Standard Method of Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-1, 16.0(5) |
NBS Special Publication 300, Vol. 9 |
1972 |
Colorimetry Precision Measurement and Calibration
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 322 |
1972 |
Structural Plain Concrete
|
American Concrete Institute |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-396 |
1972 |
Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(14) |
SAE J-592e |
1972 |
Clearance, Side Marker, and Identification Lamps
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(12) |
ASTM D2459 |
1972 |
Standard Test Method for Gamma Spectrometry of Water
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-S-125B |
1972 |
Screening, Insect, Non-Metallic
|
Federal Specifications Standards and Test Methods |
| Labor Department |
86 FR 54611 |
29 CFR 1915 |
ANSI A14.2-1972 |
1972 |
Incorporation by Reference; Notice of Corrections
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.4.2 |
ASTM D2459 |
1972 |
Standard Test Method for Gamma Spectrometry of Water
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 62a |
1972 |
Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE)
|
U.S. Department of Housing and Urban Development |
| Environmental Protection Agency |
|
40 CFR 147.2201(b)(1) |
TXUIC regulations |
1972 |
Texas Water Code, Chapters 26, 27 and 29 (Vernon 1972 and Supp. 1982)
|
State of Texas |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
ASTM D2459 |
1972 |
Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (7) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-21 |
1971 |
Airport Miscellaneous Lighting Visual Aids
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (57) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.21(d) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec TT-P-791B |
1971 |
Putty
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(21) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-1641 |
1971 |
Floor Covering, Translucent or Transparent Vinyl Surface with Backing
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (8) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1917.42(h)(1) |
ANSI B30.9 |
1971 |
Standard for Slings
|
American National Standards Institute |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-22 |
1971 |
Maintenance Guide for Determining Degradation and Cleaning of Centerline and Touchdown Zone Lights (1971, change 1, 1976)
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
EPA Method 289.1 |
1971 |
Zinc (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-26A |
1971 |
Specification for L-823 Plug and Receptacle, Cable Connectors (Through change 1, 1971)
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(22) |
ANSI J6.7 |
1971 |
Rubber Matting for Use Around Electric Apparatus
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.31 |
1971 |
Non-Ferrous Pipe Flanges
|
American National Standards Institute |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(5) |
RUS Bulletin 50-23 (DT-18) |
1971 |
RUS Specification for 60-inch Wood Crossarm Braces
|
Rural Utilities Service, U.S. Department of Agriculture |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(1) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (4) |
EPA Method 220.1 |
1971 |
Copper (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(D) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(12) |
SAE J-394 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 147.1851(b)(1) |
OKUIC regulations |
1971 |
Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1
|
State of Oklahoma |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (9) |
EPA Method 272.1 |
1971 |
Silver (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Consumer Product Safety Commission |
|
16 CFR 1500.49 (e)(3) |
MIL-I-23594B |
1971 |
Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive
|
Defense Standardization Program, Department of Defense |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(10) |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Coast Guard |
|
46 CFR 160.171-3(b) |
Federal Standard 191A |
1971 |
Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method
|
Federal Specifications Standards and Test Methods |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-429e |
1971 |
Mechanical and Quality Requirements for Externally Threaded Fasteners
|
Society of Automotive Engineers |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
DOI/BOR Publication |
1971 |
Safety and Health Regulations for Construction, Part II
|
Bureau of Reclamation, U.S. Department of Interior |
| Federal Trade Commission |
|
16 CFR 460.5(e)(2)(i) |
FedSpec HH-I-530A |
1971 |
Insulation, Board, Thermal (Urethane)
|
Federal Specifications Standards and Test Methods |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-3 |
1971 |
Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(25)(i) |
NCASI Technical Bulletin 253 |
1971 |
An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5345-39A |
1971 |
Runway and Taxiway Retroreflective Markers
|
Federal Aviation Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 218.1 |
1971 |
Chromium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |