| Nuclear Regulatory Commission |
|
10 CFR 50.55a(h)(1) |
IEEE 279 |
1971 |
Criteria for Protection Systems for Nuclear Generating Stations
Archived
|
Institute of Electrical and Electronics Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec TT-P-791B |
1971 |
Putty
Archived
|
Federal Specifications Standards and Test Methods |
| Consumer Product Safety Commission |
|
16 CFR 1505.5 Footnote 2 |
NFPA 70 |
1971 |
National Electrical Code
Archived
|
National Fire Protection Association |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
DOI/BOR Publication |
1971 |
Safety and Health Regulations for Construction, Part II
Archived
|
Bureau of Reclamation, U.S. Department of Interior |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 13A |
1971 |
Care and Maintenance of Sprinkler Systems
Archived
|
National Fire Protection Association |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 22 |
1971 |
Standard for Water Tanks for Private Fire Protection
Archived
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(10) |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
Archived
|
ASTM International |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-429e |
1971 |
Mechanical and Quality Requirements for Externally Threaded Fasteners
Archived
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec HH-I-529B |
1971 |
Insulation Board, Thermal (Mineral Aggregate)
Archived
|
Federal Specifications Standards and Test Methods |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-1641 |
1971 |
Floor Covering, Translucent or Transparent Vinyl Surface with Backing
Archived
|
Federal Specifications Standards and Test Methods |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-475A |
1971 |
Floor Covering Vinyl, Surface Tile and Roll, with Backing including Amendment 2
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.171-3(b) |
Federal Standard 191A |
1971 |
Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.023-1(a)(1) |
MIL-S-18655C |
1971 |
Signal, Smoke and Illumination, Marine, Mark 13, Mod 0.
Archived
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.040-1(a)(2) |
MIL-R-45505A |
1971 |
Line Throwing Apparatuses, Rocket and Projectile Units
Archived
|
U.S. Department of Defense |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(12) |
RUS Bulletin 345-184, Form 397e |
1971 |
Specifications for Mobile and Fixed Dial Radio Telephone Equipment
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(3) |
RUS Bulletin 345-54, PE-52 |
1971 |
Specification for Telephone Cable Splicing Connectors
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Coast Guard |
|
46 CFR 153.4(b) |
ANSI B16.31 |
1971 |
Non-Ferrous Pipe Flanges
Archived
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 169.115(c)(4) |
FedSpec ZZ-H-451F |
1971 |
Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings
Archived
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(13) |
SAE J-395 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders
Archived
|
Society of Automotive Engineers |
| Coast Guard |
|
29 CFR 1926.6(dd)(14) |
SAE J-396 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(25)(i) |
NCASI Technical Bulletin 253 |
1971 |
An Investigation of Improved Procedures for Measurement of Mill Effluent and Receiving Water Color
Archived
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(12) |
SAE J-394 |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
Archived
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(38) |
ANSI J6.4 |
1971 |
Rubber Insulating Blankets
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(39) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
Archived
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(1) |
ASME Interim Supplement 19.5 |
1971 |
Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4
Archived
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(114) |
ASTM D2986 |
1971 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (57) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 101, 17.0(9) |
ASTM D2928 |
1971 |
Standard Method for Sampling Stacks for Particulate Matter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 5 |
APHA Standard Methods, 13th Edition |
1971 |
Standard Methods for the Examination of Water and Wastewater. 13th Edition
|
American Public Health Association |
| Consumer Product Safety Commission |
|
16 CFR 1500.49 (e)(3) |
MIL-I-23594B |
1971 |
Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive
|
Defense Standardization Program, Department of Defense |
| Environmental Protection Agency |
|
40 CFR 147.1851(b)(1) |
OKUIC regulations |
1971 |
Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1
|
State of Oklahoma |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 213.1 |
1971 |
Cadmium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 218.1 |
1971 |
Chromium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (4) |
EPA Method 220.1 |
1971 |
Copper (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (6) |
EPA Method 239.1 |
1971 |
Lead (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (7) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (8) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (9) |
EPA Method 272.1 |
1971 |
Silver (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
EPA Method 289.1 |
1971 |
Zinc (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(B) |
EPA Method 130.1 |
1971 |
Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(D) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(Q) |
EPA Method 352.1 |
1971 |
Nitrogen, Nitrate, Colorimetric, Brucine
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 85, Subpart V, Appendix I, Section (H)(1)(a) |
SAE J-549 |
1970 |
Preignition Rating of Spark Plugs
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.244(c)(3)(ii) |
AOAC Method 9 |
1970 |
Official Methods of Analysis, 11th Edition
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 264.314(d)(2)(i) |
ASTM G21 |
1970 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 265.314(e)(2)(i) |
ASTM G21 |
1970 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
ASTM International |
| Coast Guard |
|
46 CFR 160.010-1(d)(1) |
MIL-P-19644C |
1970 |
Plastic Foam, Molded Polystyrene (Expanded Bead Type)
Archived
|
U.S. Department of Defense |