| Coast Guard |
|
46 CFR 53.01-10(c)(1) |
UL 1453 |
1995 |
Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 54.05-5(c)(2) |
ASTM E208 |
1995 |
Standard Test Method for Conducting Drop-Weight Test to Determine Ni-Ductility Transition Temperature of Ferric Steels
|
ASTM International |
| Coast Guard |
|
46 CFR 63.05-1(g)(4) |
UL 1453 |
1995 |
Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 63.25-3(j) |
UL 1453 |
1995 |
Electric Booster and Commercial Storage Tank Water Heaters
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
33 CFR 164.03(b) |
RTCM Paper 71-95/SC112-STD |
1995 |
Recommended Standards for Marine Radar Equipment Installed on Ships of Less Than 300 Tons Gross Tonnage
Archived
|
Radio Technical Commission for Maritime Services |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(b)(1) |
Drawing No. 92041-008 |
1995 |
Head Skin Without Nose
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(a) |
Drawing No. 92041-018 |
1995 |
Head Form Bill of Materials
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
9 CFR 319.5(e)(2) |
AOAC Official Methods |
1995 |
Official Methods of Analysis
Archived
|
AOAC International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(b)(2) |
NHTSA Publication |
1995 |
Free Motion Head Form User's Manual, Version 2
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.150(a)(3) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests—Part 1—Electronic Instrumentation
Archived
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 587.12 |
SAE J-211 |
1995 |
Instrumentation for Impact Tests
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 272.151(b) |
AZHWMP |
1995 |
Arizona Statutes and Regulations for Approved State Hazardous Waste Management Programs
Archived
|
State of Arizona |
| Federal Communications Commission |
|
47 CFR 73.682(d) |
ATSC A/52 |
1995 |
Standard Digital Television Compression (AC-3)
Archived
|
Advanced Television Systems Committee |
| Coast Guard |
|
46 CFR 110.10-1(m)(1) |
MIL-C-24640A |
1995 |
Military Specification Cables, Light Weight, Electric, Low Smoke, for Shipboard Use, General Specification for (1995) Supplement 1 (June 26, 1995)
Archived
|
U.S. Department of Defense |
| Coast Guard |
|
21 CFR 165.110(b)(4)(iii)(F)(21) |
EPA-600-R-95-131 |
1995 |
Method 506, Rev. 1.1—Determination of phthalate and adipate esters in drinking water by liquid/liquid extraction or liquid/solid extraction and gas chromatography with photoionization detection
Archived
|
U.S. Environmental Protection Agency |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.806(19) |
1995 |
Performance Standards for Shipborne MF/HF Radio Installations Capable of Voice Communication, Narrow-Band Direct Printing and Digital Selective Calling
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.804(19) |
1995 |
Performance Standards for Shipborne MF Radio Installations Capable of Voice Communication and Digital Selective Calling
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.807(19) |
1995 |
Performance Standards for INMARSAT Standard-C Ship Earth Stations Capable of Transmitting and Receiving Direct-Printing Communications
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.802(19) |
1995 |
Performance Standards for Survival Craft Radar Transponders for Use in Search and Rescue Operations
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.803(19) |
1995 |
Performance Standards for Shipborne VHF Radio Installations Capable of Voice Communication and Digital Selective Calling
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.808(19) |
1995 |
Performance Standards for Ship Earth Stations Capable of Two-Way Communications
Archived
|
International Maritime Organization |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.810(19) |
1995 |
Performance Standards for Float-free Satellite Emergency
Archived
|
International Maritime Organization |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CGA C-5 |
1995 |
Cylinder Service Life-Seamless Steel High Pressure Cylinders
Archived
|
Compressed Gas Association |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) D9 |
ASME B&PV Code |
1995 |
Boiler and Pressure Vessel Code, Section IX
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
21 CFR 165.110(a)(2)(iv) |
The United States Pharmacopeia |
1995 |
United States Pharmacopeia1995 HHS/FDA
Archived
|
U.S. Pharmacopeial Convention |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(1)(iii) |
ASTM D3574 |
1995 |
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 110.10-1(o)(2) |
UL 50 |
1995 |
Standard for Enclosures for Electrical Equipment
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 56.01-2(k)(7) |
MSS SP-53 |
1995 |
Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components-Magnetic Particle Examination Method
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Coast Guard |
|
46 CFR 56.01-2(k)(15) |
MSS SP-83 |
1995 |
Class 3000 Steel Pipe Unions, Socket Welding and Threaded
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Coast Guard |
|
46 CFR 160.077-5(b) |
UL 1191 |
1995 |
Standard for Components for Personal Flotation Devices
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 56.01-2(k)(11) |
MSS SP-67 |
1995 |
Butterfly Valves
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Rural Utilities Service |
|
7 CFR 1724.55(a)(2) |
USACE ER 1110-2-1155 |
1995 |
U.S. Army Corps of Engineers Engineering and Design Dam Safety Program, Appendix E
Archived
|
Department of the Army, U.S. Army Corps of Engineers |
| Coast Guard |
|
46 CFR 56.01-2(e)(5) |
ASTM A126 |
1995 |
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(2) |
ASTM A47 |
1995 |
Standard Specification for Ferritic Malleable Iron Castings
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM B122/B 122M |
1995 |
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM B122/B 122M |
1995 |
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 89.6(a)(3) |
ASTM D129 |
1995 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Archived
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(k) |
SAE J-211 |
1995 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.130(a)(3) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests—Part 1—Electronic Instrumentation
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.130(a)(4) |
SAE J-211/2 |
1995 |
Instrumentation for Impact Tests—Part 2—Photographic Instrumentation
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(m) |
SAE J-211/2 |
1995 |
Instrumentation for Impact Tests—Part 2—Photographic Instrumentation
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.170(c)(1) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests—Part 1—Electronic Instrumentation
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(c) |
SAE J-211 |
1995 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.180(a)(4) |
SAE J-211/1 |
1995 |
Instrumentation for Impact Tests—Part 1—Electronic Instrumentation
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 12.01-3(b)(1) |
STCW Convention |
1995 |
STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers
Archived
|
International Maritime Organization |
| Federal Highway Administration |
|
23 CFR 625.4(b)(4) |
AASHTO Publication |
1995 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(8) |
ANSI/AASHTO/AWS D1.5 |
1995 |
Bridge Welding Code
Archived
|
American Welding Society |
| Federal Highway Administration |
|
23 CFR 625.4(c)(2) |
AASHTO Materials Standards |
1995 |
Standard Specification for Transportation Materials and Methods of Sampling and Testing, Parts I and II
Archived
|
American Association of State Highway and Transportation Officials |
| Housing and Urban Development Department |
|
24 CFR 3285.4(c)(1) |
APA PS1 |
1995 |
Construction and Industrial Plywood (with typical APA trademarks)
Archived
|
APA--The Engineered Wood Association |
| Environmental Protection Agency |
|
40 CFR 63.841(a)(1) |
ACGIH Publication |
1995 |
Industrial Ventilation Manual: A Manual of Recommended Practice, Chapter 3, Local exhaust Hoods
Archived
|
American Conference of Governmental Industrial Hygienists |