| Environmental Protection Agency |
89 FR 29440 |
40 CFR 86 |
ASTM D6348-12 |
2012 |
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3
|
ASTM International |
| Labor Department |
|
41 CFR 50-204.65 |
49 CFR 176 |
2012 |
Carriage by Vessel
|
U.S. Department of Transportation |
| Federal Communications Commission |
|
47 CFR 2.950(b) |
ISO/IEC 17065 |
2012 |
Conformity assessment—Requirements for bodies certifying products, processes and services
|
International Organization for Standardization |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
CARB LEV III Evaporative Emission Standards for Model Year 2015 and Later Vehicles |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
State of California, California Air Resources Board |
| Health and Human Services Department |
|
45 CFR 162.920(c)(4)(v) |
CAQH Publication |
2012 |
Phase III CORE 370 EFT & ERA Reassociation (CCD+/835) Rule, version 3.0.0
|
Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) |
| Environmental Protection Agency |
85 FR 78412 |
40 CFR 60 |
ASTM D445-12 |
2012 |
Fuels Regulatory Streamlining
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1048 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
89 FR 42932 |
40 CFR 63 |
EPA–600/R–12/531 |
2012 |
New Source Performance Standards for the Synthetic Organic Chemical Manufacturing Industry and National Emission Standards for Hazardous Air Pollutants for the Synthetic Organic Chemical Manufacturing Industry and Group I & II Polymers and Resins Industry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(5) |
ASTM D445 |
2012 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
ASTM D3237–12 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
85 FR 78412 |
40 CFR 1043 |
ASTM D86-12 |
2012 |
Fuels Regulatory Streamlining
|
ASTM International |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AAMA 1702.2–12 |
2012 |
Manufactured Home Construction and Safety Standards
|
American Architectural Manufacturers Association |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
APA U813M |
2012 |
Manufactured Home Construction and Safety Standards
|
APA--The Engineered Wood Association |
| Transportation Department |
87 FR 44944 |
49 CFR 171 |
ISO 11119-2:2012(E) |
2012 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEC 60079-11:2011 |
2012 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 160.005-1(b) |
Drawing No. 160.005-1 (Sheet 4) |
2012 |
Cutting Pattern and General Arrangement (Child)
|
U.S. Coast Guard |
| Coast Guard |
|
46 CFR 160.013-1(b)(1) |
Drawing No. 160.013-1 |
2012 |
Hatchet (Lifeboat and Liferaft)
|
U.S. Coast Guard |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1043 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ANSI/ISA–60079–18 |
2012 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 80 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 39.1005(e)(2) |
IEC 60309-2 |
2012 |
Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05
|
International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 160.077-21(c)(2) |
UL 1517 |
2012 |
Hybrid Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1042 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 55.14(e)(3)(ii)(H) |
40 CFR part 52, subpart F |
2012 |
State of California, Ventura County Air Pollution Control District Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 161.006-4(k) |
NSSC 43B11 |
2012 |
Bolts, nuts, studs, and tap-rivets
|
Navy Supply Systems Command |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1037 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 29440 |
40 CFR 86 |
SAE J1252_201207 |
2012 |
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 1065.720 Table 1 Note 2 |
ASTM D1267 |
2012 |
Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases
|
ASTM International |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO/TR 11364:2012(E) |
2012 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Labor Department |
|
41 CFR 50-204.65 |
49 CFR 177 |
2012 |
Carriage by Public Highway
|
U.S. Department of Transportation |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(k)(1) |
COS Safety Publication COS-2-01 |
2012 |
Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations
|
Center for Offshore Safety |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
SAE J2727_201202 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
CARB LEV III Evaporative Emission Standards for Model Year 2015 and Later Vehicles |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
State of California, California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 60.17(n)(1) |
NAERC EOP-002-3 |
2012 |
Capacity and Energy Emergencies
|
North American Electric Reliability Corporation |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(3) |
ASTM D130 |
2012 |
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
|
ASTM International |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEC 60079-11:2011 |
2012 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
IEEE 45.7-2012 |
2012 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1048 |
SAE J1252_201207 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
ASTM D445–12 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 272.1851(c)(1) |
OKHWMP |
2012 |
State of Oklahoma Statutes and Regulations for Approved State Hazardous Waste Management Programs
|
State of Oklahoma |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
ASTM D3237–12 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
88 FR 10468 |
40 CFR 770 |
DMC 2012 GP User’s Manual |
2012 |
Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products
|
Georgia-Pacific Chemicals LLC |
| Transportation Department |
87 FR 44944 |
49 CFR 176 |
SSR-6 (Rev.1) |
2012 |
Hazardous Materials: Harmonization With International Standards
|
International Atomic Energy Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1068 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Federal Communications Commission |
90 FR 38045 |
47 CFR 2 |
ISO/IEC 17065:2012(E) |
2012 |
Promoting the Integrity and Security of Telecommunications Certification Bodies, Measurement Facilities, and the Equipment Authorization Program
|
International Organization for Standardization / International Electrotechnical Commission |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AAMA 1704–12 |
2012 |
Manufactured Home Construction and Safety Standards
|
American Architectural Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 1066.501(a)(1) |
SAE J-1634 |
2012 |
Battery Electric Vehicle Energy Consumption and Range Test Procedure
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
APA U814J |
2012 |
Manufactured Home Construction and Safety Standards
|
APA--The Engineered Wood Association |
| Transportation Department |
87 FR 44944 |
49 CFR 171 |
ISO 11119-2:2012/Amd.1:2014(E) |
2012 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 80.8(e)(1)(i) |
ASTM D4057 |
2012 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |