| Coast Guard |
|
46 CFR 160.048-3(c) |
MIL-B-2766 |
1967 |
Batt, Fibrous Glass, Lifesaving Equipment NDG DHS/USCG 46 CFR 160.048-1(a)(1)
|
U.S. Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1910.145(d)(2) |
ANSI Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.005-3(a) |
MIL-B-2766B |
1967 |
Batt, Fibrous Glass, Lifesaving Equipment
|
U.S. Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1910.252(c)(1)(vi)(B) |
ANSI Z49.1 |
1967 |
Safety in Welding and Cutting
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(12) |
ANSI A17.2b |
1967 |
Practice for the Inspection of Elevators (Inspector's Manual) Supplement
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.200(c)(3) |
ANSI Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.145(d)(4) |
ANSI Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.485a(d)(1) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1631.4(c)(2) Footnote 4 |
ASTM D1776 |
1967 |
Conditioning Textiles and Textile Products for Testing
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.145(d)(6) |
ANSI Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
|
American National Standards Institute |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-4(b) |
NFPA 72A |
1967 |
Installation, Maintenance, and Use of Local Protective Signaling Systems
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(27) |
USA Z53.1 |
1967 |
Safety Color Code for Marking Physical Hazards, (also referred to as ANSI Z53.1-1967)
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(iii)(B) |
ANSI B31.1 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.116 S6.4.2 |
ASTM D1121 |
1967 |
Standard Method of Test for Reserve Alkalinity of Engine Antifreezes and Antirust
|
ASTM International |
| Consumer Product Safety Commission |
|
16 CFR 1631.4(a)(5) Footnote 2 |
ASTM D2654 |
1967 |
Standard Method of Test for Amount of Moisture in Textile Materials
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(14) |
NFPA 62 |
1967 |
Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(64) |
ANSI Z49.1 |
1967 |
Safety in Welding and Cutting
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 48 |
1967 |
Labels of Independent Programs for Certifying Pressure-Treated Lumber and Plywood with 5 supplements
|
U.S. Department of Housing and Urban Development |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(19) |
ANSI B30.2.0 |
1967 |
Safety Code for Overhead and Gantry Cranes
|
American National Standards Institute |
| Mine Safety and Health Administration |
|
30 CFR 75.1712-3(b) |
AIA Code |
1967 |
National Building Code
|
American Insurance Association |
| Food and Drug Administration |
|
21 CFR 172.860(c)(3) |
AOAC Journal |
1967 |
Journal of the Association of Official Analytical Chemists, Volume 50 (No. 1) pages 216-218
|
AOAC International |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
USACE EM-385-1-1 |
1967 |
General Safety Requirements
|
Department of the Army, U.S. Army Corps of Engineers |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Coast Guard |
|
46 CFR 160.052-3a(b)(1)(i) |
Federal Standard 151 |
1967 |
Metals, Test Methods
|
Federal Specifications Standards and Test Methods |
| Mine Safety and Health Administration |
|
30 CFR 71.402(b) |
AIA Code |
1967 |
National Building Code
|
American Insurance Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(ix)(B)(1) |
NFPA 496 |
1967 |
Standard for Purged and Pressurized Enclosures for Electrical Equipment in Hazardous Locations
|
National Fire Protection Association |
| National Highway Traffic Safety Administration |
|
49 CFR 571.103 S4.3 |
SAE J-902a |
1967 |
Passenger Car Windshield Defrosting Systems
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.145(d)(10) |
ASAE R276 |
1967 |
Emblem for Identifying Slow Moving Vehicles
|
American Society of Agricultural Engineers |
| Consumer Product Safety Commission |
|
16 CFR 1615.4(f)(1) Footnote 4 |
ASTM D1776 |
1967 |
Conditioning Textiles and Textile Products for Testing
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 761.71(b)(2)(vi) |
ASTM E258 |
1967 |
Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(191) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Coast Guard |
|
46 CFR 160.062-1(a)(2) |
Federal Standard 151 |
1967 |
Metals, Test Methods
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 60.593a(b)(2) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.218(d)(4) |
ANSI B31.1.0 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI B31.1 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.261(a)(3)(iv) |
ANSI A17.2b |
1967 |
Practice for the Inspection of Elevators
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(17) |
ASTM D1121 |
1967 |
Standard Method of Test for Reserve Alkalinity of Engine Antifreezes and Antirusts
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(30) |
SAE J-902a |
1967 |
Passenger Car Windshield Defrosting Systems
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.261(c)(8)(iv) |
ANSI B30.2.0 |
1967 |
Safety Code for Overhead and Gantry Cranes
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.485(d)(1) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.632(f) |
ASTM E168 |
1967 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(8) |
ASTM D2504 |
1967 |
Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.253(d)(1)(i)(A)(2) |
ANSI B31.1 |
1967 |
Code for Pressure Piping, section 2, Industrial Gas and Air Piping Systems
|
American National Standards Institute |
| Mine Safety and Health Administration |
|
30 CFR 77.403-1(d)(2)(iii)(B) |
SAE J-429d |
1967 |
Mechanical and Quality Requirements for Externally Threaded Fasteners
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.205(a) S5.2 |
SAE J-673a |
1967 |
Automotive Glazing
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(v)(1) |
TFI M-1 |
1967 |
Standards for the Storage and Handling of Agricultural Anhydrous Ammonia
|
Fertilizer Institute |
| Federal Aviation Administration |
|
14 CFR 152.11(a) |
150/5210-10 |
1967 |
Airport Fire and Rescue Equipment Building Guide
|
Federal Aviation Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 160.062-3(a) |
Federal Standard 151 |
1967 |
Metals, Test Methods
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(30) |
NFPA 496 |
1967 |
Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.218(e)(1)(iv) |
ANSI B31.1.0 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |