DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (1) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1963 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Overall width | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.062-3(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(ii)(B) | CGA P-3 | 1963 | Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Coast Guard | 29 CFR 1926.6(h)(2) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.062-4(d)(1) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases and 1965 Addenda | Compressed Gas Association | |
Public Health Service | 42 CFR 84.41(h) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(15) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vi) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Rural Utilities Service | 7 CFR 1755.97(b)(10) | RUS Bulletin 345-180, Form 397a | 1963 | Specification for Voice Frequency Repeaters and Voice Frequency Repeater Trunks | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vii) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-ray and Sealed Gamma Ray Sources | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(49) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
Public Health Service | 42 CFR 84.43(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(2)(ii) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-ray and Sealed Gamma Ray Sources | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 162.028-3(e) | MIL-STD-167 | 1963 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(9) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(7) | CGA P-3 | 1963 | Specifications, Properties, and recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.485(d)(1) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 80 | 1963 | Standard for Steel Inside Tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1a | 1963 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(194) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.159(a)(2) | NFBU 13 | 1963 | Rules and Regulations of the National Board of Fire Underwriters for Sprinkler Equipment Automatic and Open Systems | National Board of Fire Underwriters | |
Occupational Safety and Health Administration | 29 CFR 1915.172(a) | ASME B&PV Code | 1963 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.1(a)(4) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
National Highway Traffic Safety Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.67 | CGA G-4 | 1962 | Oxygen | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association |