| Environmental Protection Agency |
|
40 CFR 98.244(b)(4)(viii) |
EPA Method 8021B |
1966 |
Aromatic and Halogenated Volatiles By Gas Chromatography Using Photoionization and/or Electrolytic Conductivity Detectors, Revision 2
|
U.S. Environmental Protection Agency |
| Rural Utilities Service |
|
33 CFR 154.106(h)(2) |
OCIMF Publication |
1966 |
International Safety Guide for Oil Tankers and Terminals (ISGOTT), Sections 9.1, 9.2, 9.3 and 9.5, 4th Edition
|
Oil Companies International Marine Forum |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
AWS D1.0 |
1966 |
Code for Welding in Building Construction
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(42) |
ANSI K61.1 |
1966 |
Safety Requirements for the Storage and Handling of Anhydrous Ammonia
|
American National Standards Institute |
| Federal Aviation Administration |
|
14 CFR 36.6(c)(1)(ii) |
IEC 225 |
1966 |
Octave, Half-Octave, Third Octave Band Filters Intended for the Analysis of Sounds and Vibrations
|
International Electrotechnical Commission |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(6) |
API 650 |
1966 |
Welded Steel Tanks for Oil Storage
|
American Petroleum Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(21) |
SAE J-787b |
1966 |
Motor Vehicle Seat Belt Anchorage
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(58) |
ANSI Z33.1 |
1966 |
Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(17) |
SAE J-959 |
1966 |
Lifting Crane Wire-Rope Strength Factors
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(4) |
CGA G-7.1 |
1966 |
Commodity Specification
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(27) |
ANSI B31.3 |
1966 |
Petroleum Refinery Piping
|
American National Standards Institute |
| Coast Guard |
|
33 CFR 118.3(c) |
FHWA Publication |
1966 |
Standard Alphabets for Highway Signs
|
Federal Highway Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(28) |
ANSI B31.5 |
1966 |
Refrigeration Piping
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 164.120-5(e)(1) |
MIL-R-7575C |
1966 |
Military Specification, Resin, Polyester, Low-Pressure Laminating
|
U.S. Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(v)(1) |
TFI M-1 |
1966 |
Standards for the Storage and Handling of Agricultural Anhydrous Ammonia
|
Fertilizer Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.104 S3 Glazing surface reference line |
SAE J-903a |
1966 |
Passenger Car Windshield Wiper Systems
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(28) |
ASTM E77 |
1966 |
Standard Method for Inspection, Test, and Standardization of Etched-Stem Liquid-in-Glass Thermometers
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.104 S3 Plan view (a) |
SAE J-903a |
1966 |
Passenger Car Windshield Wiper Systems
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 164.120-7(a)(1)(i) |
MIL-R-7575C |
1966 |
Military Specification, Resin, Polyester, Low-Pressure Laminating
|
U.S. Department of Defense |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(39) |
SAE J-977 |
1966 |
Instrumentation for Laboratory Impact Tests
|
Professional Association of Diving Instructors |
| Occupational Safety and Health Administration |
|
29 CFR 1926.152(i)(1)(iii)(A)(2) |
API 650 |
1966 |
Welded Steel Tanks for Oil Storage, Third Edition
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(24) |
ASTM D2161 |
1966 |
Conversion Tables for SUS
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(32) |
ASTM E308 |
1966 |
Standard Practice for Spectrophotometry and Description of Color in CIE 1931 System
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(4) |
NFPA 34 |
1966 |
Standard for Dip Tanks Containing Flammable or Combustible Liquids
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(3) |
ASTM A126 |
1966 |
Gray iron Casting for Valves, Flanges and Pipe Fittings
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(96) |
API Standard 2552 |
1966 |
USA Standard Method for Measurement and Calibration of Spheres and Spheroids
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 164.120-7(a)(2) |
MIL-R-7575C |
1966 |
Military Specification, Resin, Polyester, Low-Pressure Laminating
|
U.S. Department of Defense |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(y)(6) |
NFPA 385 |
1966 |
Standard for Tank Vehicles for Flammable and Combustible Liquids
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(i)(4) |
AWS D1.0 |
1966 |
Code for Welding in Building Construction
|
American Welding Society |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(29) |
NFPA 385 |
1966 |
Recommended Regulatory Standard for tank Vehicles for Flammable and Combustible Liquids
|
National Fire Protection Association |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(97) |
API Standard 2555 |
1966 |
Method for Liquid Calibration of Tanks
|
American Petroleum Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S8.1.13 |
FedSpec L-S-300 |
1965 |
Sheeting and Tape, Reflective: Nonexposed Lens, Adhesive Backing
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(28) |
ASTM D270 |
1965 |
Standard Method of Sampling Petroleum and Petroleum Products
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(4) |
ASTM A391 |
1965 |
Alloy Steel Chain
|
ASTM International |
| Coast Guard |
|
46 CFR 160.048-1(a)(3) |
Federal Standard 751 |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(10) |
ANSI A17.1 |
1965 |
Safety Code for Elevators, Dumbwaiters, and Moving Walks
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(4) |
ANSI A11.1 |
1965 |
Practice for Industrial Lighting
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.176-9(d) |
Federal Standard 751A |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(m)(1) |
FedSpec GG-B-0067b |
1965 |
Air Compressed for Breathing Purposes or Interim Federal Specifications
|
Federal Specifications Standards and Test Methods |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-36 |
1965 |
Specification for L-808 Lighted Wind Tee
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(32) |
NFPA 566 |
1965 |
Standard for the Installation of Bulk Oxygen Systems at Consumer Sites
|
National Fire Protection Association |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-2 |
1965 |
Airport Aprons
|
Federal Aviation Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 160.176-4(b) |
Federal Standard 751A |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(32) |
SAE J-921 |
1965 |
Instrument Panel Laboratory Impact Test Procedure
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.171-3(b) |
Federal Standard 751A |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(11) |
ANSI A17.2a |
1965 |
Practice for the Inspection of Elevators (Inspector's Manual) Supplement
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(33) |
SAE J-941 |
1965 |
Passenger Car Driver's Eye Range
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.077-5(b) |
Federal Standard 751 |
1965 |
Stitches, Seams, and Stitchings
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 164.015-4(k)(2) |
MIL-F-859E |
1965 |
Fuel Oil, Boiler
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 164.015-1(a)(1) |
MIL-F-859E |
1965 |
Fuel Oil, Boiler
|
U.S. Department of Defense |