| Coast Guard |
|
21 CFR 184.1115(b) |
Food Chemicals Codex |
1981 |
Agar-agar
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 147.2201(a)(3)(ii) |
TXUIC regulations |
1981 |
Amendment to 16 TAC section 3.46 (section .051.02.02.046) issued December 21, 1981, effective April 1, 1982
|
State of Texas |
| Environmental Protection Agency |
|
40 CFR 63.11163(g)(1)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.772(e)(3)(iv)(C)(1) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C549 |
1981 |
Perlite Loose Fill Insulation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC Footnote 6 |
APHA Standard Methods, 15th Edition, Supplement |
1981 |
Selected Analytical Methods Approved and Cited by the United States Environmental Protection Agency, Supplement to the 15th Edition of Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 60.106a(a)(1)(vi) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
89 FR 42932 |
40 CFR 63 |
ASME/ANSI PTC 19.10–1981 |
1981 |
New Source Performance Standards for the Synthetic Organic Chemical Manufacturing Industry and National Emission Standards for Hazardous Air Pollutants for the Synthetic Organic Chemical Manufacturing Industry and Group I & II Polymers and Resins Industry
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 4, (2)(c) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.104a(i)(5) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Table 5, (1)(c) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(a)(1)(iv) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 62.14452(d) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 5, 3(c) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 799.9310(h)(3) |
OECD No. 408 |
1981 |
Guidelines for Testing of Chemicals, Subchronic Oral Toxicity-Rodent: 90-day Study
|
Organization for Economic Cooperation and Development |
| Coast Guard |
|
21 CFR 184.1120(b) |
Food Chemicals Codex |
1981 |
Brown Algae
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 147.2201(a)(3)(iii) |
TXUIC regulations |
1981 |
Amendment to 16 TAC section 3.71 (section .051.02.02.074) issued December 21, 1981, effective April 1, 1982
|
State of Texas |
| Environmental Protection Agency |
|
40 CFR 147.2550(a)(6) |
WYUIC regulations |
1981 |
Land Quality Rules and Regulations, Wyoming Department of Environmental Quality, Chapter XXI: In Situ Mining (effective March 26, 1981)
|
State of Wyoming |
| Environmental Protection Agency |
|
40 CFR 60.5406(b)(4)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.14(f)(1) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A588 |
1981 |
High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11163(g)(2) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
84 FR 15846 |
40 CFR 60 |
ANSI/ASME PTC 19.10-1981 |
1981 |
Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources: Commercial and Industrial Solid Waste Incineration Units; Technical Amendments
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 265.193(i)(2) Note |
API Publication |
1981 |
Guide for Inspection of Refining Equipment, Chapter XIII, Atmospheric and Low Pressure Storage Tanks, 4th edition
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 60.106a(a)(2)(iii) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
CGA S-1.2 |
1980 |
Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
EPA Method 906.0 |
1980 |
Tritium, Report Number 600-4-80-032
|
U.S. Environmental Protection Agency |
| Transportation Department |
89 FR 15636 |
49 CFR 107 |
CGA TB-2 |
1980 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB Footnote 22 |
HCC Method 8008 |
1980 |
1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water
|
Hach Chemical Company |
| Environmental Protection Agency |
|
40 CFR 147.850(a)(3) |
KSUIC regulations |
1980 |
Kansas Statutes Annotated §§ 65-161, 65-164 through 65-166a, 65-171d (1980 and Cumm. Supp. 1989)
|
State of Kansas |
| Coast Guard |
|
33 CFR 164.03(b) |
CIA 3 |
1980 |
Standard Test Methods for Fiber Rope Including Standard Terminations
|
Cordage Institute |
| Coast Guard |
|
27 CFR 21.6(a) |
National Formulary |
1980 |
The USP and NF Compendia
|
U.S. Pharmacopeial Convention |
| Food and Drug Administration |
|
21 CFR 172.372(d) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(ii) |
ASTM D1072 |
1980 |
Standard Test Method for Total Sulfur in Fuel Gases
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 430, Appendix A, Method 1653 (18.3) |
EPA-600-4-80-025 |
1980 |
Performance Tests for the Evaluation of Computerized Gas Chromatography/Mass Spectrometry Equipment and Laboratories
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 169.115(c)(3) |
NFPA 302 |
1980 |
Fire Protection Standard for Pleasure and Commercial Motor Craft
|
National Fire Protection Association |
| Transportation Department |
89 FR 15636 |
49 CFR 172 |
CGA TB-2 |
1980 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(ii) |
APHA Standard Methods, 15th Edition |
1980 |
Standard Methods for the Examination of Water and Wastewater. 15th Edition
|
American Public Health Association |
| Food and Drug Administration |
|
21 CFR 177.2450(b)(1) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 147.51(a)(1) |
ALUIC regulations |
1980 |
Alabama Water Pollution Control Act, Code of Alabama 1975, sections 22-22-1 through 22-22-14
|
State of Alabama |
| Coast Guard |
|
46 CFR 56.01-2(f)(1) |
EJMA Standards |
1980 |
Standards of the Expansion Joint Manufacturers Association
|
Expansion Joint Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 147.850(b) |
KSUIC regulations |
1980 |
Kansas Statutes Annotated §§ 65-161 through 65-171(w), (1980 and Supp. 1983)
|
State of Kansas |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(23) |
SAE J-826 |
1980 |
Devices for Use in Defining and Measuring Vehicle Seating Accommodation
|
Society of Automotive Engineers |
| Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.6(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis, 13th Edition
|
AOAC International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(36) |
SAE J-944 |
1980 |
Steering Control System—Passenger Car—Laboratory Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 147.650(a)(9) |
IDUIC regulations |
1980 |
Administrative Procedure, Title 67, Chapter 52, Idaho Code, sections 67-5201 through 67-5218 (Bobbs-Merrill 1980 and Supp. 1984)
|
State of Idaho |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(130) |
ASTM D3270 |
1980 |
Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
|
ASTM International |
| Research and Special Programs Administration |
|
21 CFR 131.125(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| Coast Guard |
|
21 CFR 131.149(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(g)(1) |
IES LM-45 |
1980 |
Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
|
Illuminating Engineering Society of North America |