| Energy Department |
90 FR 4589 |
10 CFR 430 |
IES LM–45–15 |
2015 |
Energy Conservation Program: Test Procedure for General Service Lamps
|
Illuminating Engineering Society of North America |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.A-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 763 Appendix A (II)(J)(6) |
EPA Method 2A |
2015 |
Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 8104 |
49 CFR 191 |
API RP 1171 |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(vii) |
AASHTO/AWS D1.5M/D1.5 |
2015 |
Bridge Welding Code
|
American Association of State Highway and Transportation Officials |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 6 |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.VIII.2-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D4024 |
2015 |
Standard Specification for Machine Made Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.3.2 |
APHA Method 602 |
2015 |
Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere
|
American Public Health Association |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
IEEE C37.27-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 433.11 |
40 CFR Part 401 |
2015 |
General Provisions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 5, Subpart A |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.5935 Low Flame Spread/Low Smoke Products |
ASTM E84 |
2015 |
Standard Test Method for Surface Burning Characteristics of Building Materials
|
ASTM International |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASME B16.1–2015 |
2015 |
Updates to Marine Engineering Standards
|
American Society of Mechanical Engineers |
| Energy Department |
87 FR 65856 |
10 CFR 431 |
ANSI/ASHRAE 29-2015 (R2018) |
2015 |
Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEEE C37.27-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(5) |
APHA Method 608 |
2015 |
Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter
|
American Public Health Association |
| Safety and Environmental Enforcement Bureau |
83 FR 49257 |
30 CFR 250.828 (c) |
ANSI/API RP 14B |
2015 |
Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 445.10 |
40 CFR Part 264 |
2015 |
Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11120:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ANSI Z21.5.1–2015/CSA 7.1– 2015 |
2015 |
Manufactured Home Construction and Safety Standards
|
Canadian Standards Association |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NB-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 55.14(e) |
EPA Publication |
2015 |
State and local OCS requirements
|
U.S. Environmental Protection Agency |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 21172–1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.VIII.3-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 272, Subpart VV |
VAHWMP |
2015 |
Commonwealth of Virginia Hazardous Waste Management Program (Reserved)
|
Commonwealth of Virginia |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEC 60079-2:2014 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 433.11 |
40 CFR Part 136 |
2015 |
Guidelines Establishing Test Procedures for the Analysis of Pollutants
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 6, Subpart A |
EPA Method 1670 |
2015 |
Reverse Phase Extraction (RPE) Method for Detection of Oil Contamination in Non-Aqueous Drilling Fluids (NAF) (GC/MS)
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
NFPA 70E |
2015 |
Worker Safety and Health Program
|
National Fire Protection Association |
| Environmental Protection Agency |
86 FR 15587 |
40 CFR 82 |
SAE J2851-2915 |
2015 |
Protection of the Stratospheric Ozone: Motor Vehicle Air Conditioning System Servicing
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Low Flame Spread/Low Smoke Products |
ASTM E162 |
2015 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
ASTM International |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEC 60079-5:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(6) |
APHA Method 609 |
2015 |
Tentative Method of Analysis for Tritium Content of the Atmosphere
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 435.41(ff) |
EPA Method 1617 |
2015 |
Static Sheen Test
|
U.S. Environmental Protection Agency |
| Consumer Product Safety Commission |
|
16 CFR 1201.4 |
ANSI Z97.1 |
2015 |
American National Standard for Safety Glazing Materials Used in Building—Safety Performance Specifications and Methods of Test
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 445.10 |
40 CFR Part 265 |
2015 |
Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills).
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 98.7(k)(1) |
APHA Method 2540 G |
2015 |
Total, Fixed, and Volatile Solids in Solid and Semisolid Samples
|
American Public Health Association |
| Nuclear Regulatory Commission |
85 FR 26540 |
10 CFR 50 |
ASME BPVC CC N-729-6 |
2015 |
American Society of Mechanical Engineers 2015-2017 Code Editions Incorporation by Reference
|
American Society of Mechanical Engineers |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
UL 2556 2015 |
2015 |
Update to Electrical Engineering Regulations
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 9 |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NC-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ANSI Z21.22–2015 |
2015 |
Updates to Marine Engineering Standards
|
American National Standards Institute |
| Transportation Department |
85 FR 27810 |
49 CFR 176 |
ISO 22434:2006(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 21172–1:2015/Amd 1:2018(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 8 |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |