| Federal Highway Administration |
|
23 CFR 625.4(d)(1)(ii) |
A Policy on Design Standards-Interstate System |
2016 |
A Policy on Design Standards—Interstate System
|
American Association of State Highway and Transportation Officials |
| Energy Department |
87 FR 37685 |
10 CFR 431 |
ANSI C78.44-2016 |
2016 |
Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures
|
American National Standards Institute |
| Environmental Protection Agency |
88 FR 18396 |
40 CFR 51 |
ASTM D6784-16 |
2016 |
Testing Provisions for Air Emission Sources
|
ASTM International |
| Energy Department |
87 FR 65856 |
10 CFR 431 |
AHRI 810 (I-P)-2016 with Addendum 1 |
2016 |
Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers
|
Air Conditioning, Heating, and Refrigeration Institute |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
IEEE 45.8-2016 |
2016 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME B31.5-2016 |
2016 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 314 |
ISO 13485 |
2016 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Energy Department |
87 FR 30775 |
10 CFR 430 |
UL 730-2016 |
2016 |
Energy Conservation Program: Test Procedures for Direct Heating Equipment
|
Underwriters Laboratories, Inc. |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
UL 1203 2015 |
2015 |
Update to Electrical Engineering Regulations
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 272, Subpart UU |
VTHWMP |
2015 |
State of Vermont Hazardous Waste Management Program (Reserved)
|
State of Vermont |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.3.1 |
APHA Method 608 |
2015 |
Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter
|
American Public Health Association |
| Environmental Protection Agency |
85 FR 41100 |
40 CFR 63 |
ASTM D2111-10(2015) |
2015 |
NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn...
|
ASTM International |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM D323–15a |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 4, Subpart A |
EPA Method 1647 |
2015 |
Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 59.508(a) |
EPA Method 311 |
2015 |
Analysis of Hazardous Air Pollutant Compounds in Paints and Coatings by Direct Injection into a Gas Chromatograph (40 CFR part 63, appendix A
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.II.C-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(4) |
APHA Method 602 |
2015 |
Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere
|
American Public Health Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM A197/A197M–00(2015) |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 435.41(ee) |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 176 |
ISO 11120:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
ASTM F2876-10 |
2015 |
Update to Electrical Engineering Regulations
|
ASTM International |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.V-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Energy Department |
87 FR 37685 |
10 CFR 431 |
ANSI C82.6- 2015 (R2020) |
2015 |
Energy Conservation Program: Test Procedure for Metal Halide Lamp Fixtures
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 763 Appendix A (II)(J)(6) |
EPA Method 2A |
2015 |
Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A
|
U.S. Environmental Protection Agency |
| Energy Department |
88 FR 36217 |
10 CFR 431 |
ASTM D5291-10(2015) |
2015 |
Energy Conservation Program: Test Procedure for Commercial Warm Air Furnaces
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant resin (1) |
ASTM C581 |
2015 |
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1064(b)(1) |
API MPMS |
2015 |
Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks, Chapter 19, Section 3, Part A
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 6 |
EPA Method 1644 |
2015 |
Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.3.2 |
APHA Method 602 |
2015 |
Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 433.11 |
40 CFR Part 401 |
2015 |
General Provisions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 5, Subpart A |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Interior Department |
84 FR 21908 |
30 CFR 250 |
API Bulletin 92L, 1st Edition |
2015 |
Oil and Gas and Sulfur Operations in the Outer Continental Shelf-Blowout Preventer Systems and Well Control Revisions
|
American Petroleum Institute |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
UN Manual of Tests and Criteria Rev. 6/Amend. 1 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
United Nations |
| Energy Department |
85 FR 1504 |
10 CFR 429 |
ISO 1217:2009 |
2015 |
Energy Conservation Program: Energy Conservation Standards for Air Compressors
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(a) |
EPA Method 1631 |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
89 FR 85340 |
6 CFR 37 |
NIST SP 800–57 Part 3 Rev.1 |
2015 |
Minimum Standards for Driver's Licenses and Identification Cards Acceptable by Federal Agencies for Official Purposes; Waiver for Mobile Driver's Licenses
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.II.D.C-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 5(5) |
APHA Method 608 |
2015 |
Tentative Method of Analysis for Strontium90 Content of Atmospheric Particulate Matter
|
American Public Health Association |
| Transportation Department |
85 FR 27810 |
49 CFR 176 |
ISO 11623:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 445.10 |
40 CFR Part 264 |
2015 |
Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities, Subpart N-(Landfills)
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
ISO 11118:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.VI-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 55.14(e) |
EPA Publication |
2015 |
State and local OCS requirements
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
UL 50 2015 |
2015 |
Update to Electrical Engineering Regulations
|
Underwriters Laboratories, Inc. |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Environmental Protection Agency |
|
40 CFR 63.1064(b)(2) |
API MPMS |
2015 |
Air Concentration Test Method for the Measurement of Rim Seal Loss Factors for Floating-Roof Tanks, Chapter 19, Section 3, Part B
|
American Petroleum Institute |
| Environmental Protection Agency |
88 FR 10468 |
40 CFR 770 |
BS EN ISO 12460-5:2015 E |
2015 |
Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products
|
British Standards Institution |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 6 |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
83 FR 49257 |
30 CFR 250.814 (d) |
ANSI/API RP 14B |
2015 |
Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems
|
American Petroleum Institute |