| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(74) |
ANSI/API Spec. 17J |
2008 |
Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption
|
American Petroleum Institute |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1066 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(35) |
ASTM D7430 |
2008 |
Standard Practice for Mechanical Sampling of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(l)(1) |
MSHA Handbook Number: PH-08-V-1 |
2008 |
General Coal Mine Inspection Procedures and Inspection Tracking System
|
Mine Safety and Health Administration, U.S. Department of Labor |
| Coast Guard |
|
46 CFR 160.170-5(b)(3) |
ASTM A313/A 313M |
2008 |
Standard Specification for Stainless Steel Spring Wire
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.174(b)(2)(iv) |
ASTM E1019 |
2008 |
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.80(b)(9 |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14
|
International Maritime Organization |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(24) |
API MPMS |
2008 |
Chapter 5—Metering
|
American Petroleum Institute |
| Homeland Security Department |
89 FR 85340 |
6 CFR 37 |
FIPS PUB 198–1 |
2008 |
Minimum Standards for Driver's Licenses and Identification Cards Acceptable by Federal Agencies for Official Purposes; Waiver for Mobile Driver's Licenses
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1060 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Transportation Department |
87 FR 79752 |
49 CFR 176 |
ISO 4706:2008(E) |
2008 |
Hazardous Materials: Editorial Corrections and Clarifications
|
International Organization for Standardization |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
NIST SP811 |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Energy Department |
|
10 CFR 430.3(j)(4) |
EPA Publication |
2008 |
ENERGY STAR Program Requirements for Single Voltage External Ac-Dc and Ac-Ac Power Supplies, Eligibility Criteria (Version 2.0)
|
U.S. Environmental Protection Agency |
| Transportation Department |
89 FR 92296 |
14 CFR 1 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 160.170-7(b)(3) |
ASTM A314 |
2008 |
Standard Specification for Stainless Steel Billets and Bars for Forging
|
ASTM International |
| Coast Guard |
|
46 CFR 162.161-3(d) |
NFPA 2001 |
2008 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 1066.301(b) |
SAE J-2263 |
2008 |
Road Load Measurement Using Onboard Anemometry and Coastdown Techniques
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(lxvi) |
ASTM D7284 |
2008 |
Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
|
ASTM International |
| Coast Guard |
|
46 CFR 160.076-11(b)(3) |
UL 1191 |
2008 |
UL Standard for Safety for Components for Personal Flotation Devices, Fourth Edition including revisions through August 24, 2011
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 171.012(b)(2) |
IMO Resolution MSC 267(85) |
2008 |
Adoption of the International Code on Intact Stability, 2008 (2008 IS Code)
|
International Maritime Organization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
86 FR 34308 |
40 CFR 1066 |
NIST Special Publication 811 |
2008 |
Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(33) |
ASTM D6866 |
2008 |
Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 55.14(d)(5)(i) |
40 CFR part 52, subpart I |
2008 |
State of Delaware Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1042 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 98.253(n) |
EPA AP 42, Section 5.2 |
2008 |
Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 1043.100(a)(1)(i) |
IMO Publication |
2008 |
Revised MARPOL Annex VI, Regulations for the Prevention of Pollution from Ships (2008 Annex VI)
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Table 5, (4)(e) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.1 |
SAE J-2196 |
2008 |
Service Hose for Automotive Air-Conditioning
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.156-5(b)(1) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel,
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.30(d) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 13
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 131.44(b)(2) |
Florida Statute, Title 28, Section 373.4592 |
2008 |
Everglades improvement and management
|
State of Florida |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (6) |
ASTM D3559D |
2008 |
Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace
|
ASTM International |
| Coast Guard |
|
33 CFR 155.140(e)(1) |
NFPA 1001 |
2008 |
Standard for Fire Fighter Professional Qualifications
|
National Fire Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(12) |
AWPA P8 |
2008 |
Standard for Oil-Borne Preservatives
|
American Wood Protection Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
MSS SP–45–2003 |
2008 |
Updates to Marine Engineering Standards
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Veterans Affairs Department |
|
38 CFR 17.1(b)(7) |
NFPA 25 |
2008 |
Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
|
National Fire Protection Association |
| Federal Railroad Administration |
|
49 CFR 232.603(a) |
AAR S-4270 |
2008 |
ECP Brake System Configuration Management
|
Association of American Railroads |
| Coast Guard |
|
46 CFR 160.135-5(b)(10) |
ASTM D2584 |
2008 |
Standard Test Method of Ignition Loss for Cured Reinforced Resins
|
ASTM International |
| Coast Guard |
|
46 CFR 160.170-5(b)(4) |
ASTM A314 |
2008 |
Standard Specification for Stainless Steel Billets and Bars for Forging
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 13, 1(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) 2002 EPA/AP
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.80(b)(9) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 18
|
International Maritime Organization |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ANSI/AHRI Standard 210/240-2008 with Addenda 1 and 2 |
2008 |
Manufactured Home Construction and Safety Standards
|
Air Conditioning, Heating, and Refrigeration Institute |
| Coast Guard |
|
46 CFR 160.133-5(b)(1) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 105.3(b)(1) |
ASTM D323-08 |
2008 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
NIST SP811 |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Coast Guard |
|
46 CFR 160.151-17(a)(2)(vii) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Coast Guard |
|
46 CFR 160.156-7(b)(3)(ii) |
ASTM A653/A 653M |
2008 |
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
|
ASTM International |
| Transportation Department |
89 FR 92296 |
14 CFR 11 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |