| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (37) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (50) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (52) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (52) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
EPA Method 200.9 |
1994 |
Metals by Graphite Atomic Absorption, Revision 2.2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
EPA Method 200.7 |
1994 |
ICP - metals, Revision 4.4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (60) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 430.3(c)(17) |
ANSI Z21.56 |
1994 |
Gas-Fired Pool Heaters
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 430.3(c)(9) |
ANSI C79.1 |
1994 |
Nomenclature for Glass Bulbs Intended for Use with Electric Lamps
Archived
|
American National Standards Institute |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1446 |
1994 |
Standard Test Method for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Archived
|
ASTM International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1447 |
1994 |
Standard Specification for Protective Headgear Used in Bicycling
Archived
|
ASTM International |
| Federal Highway Administration |
|
23 CFR 625.4(b)(10) |
AASHTO Publication |
1994 |
Standard Specification for Structural Supports for Highway Signs, Luminaires, and Traffic Signals
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(3) |
AASHTO Publication |
1994 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(5) |
AASHTO Publication |
1994 |
AASHTO LRFD Bridge Design Specifications, 1st Edition, U.S. Units
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(6) |
AASHTO Publication |
1994 |
AASHTO LRFD Bridge Design Specifications, 1st Edition, SI Units
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
16 CFR 1203.53(b) |
Snell N-94 |
1994 |
Standard for Protective Headgear for Use in Non-Motorized Sports
Archived
|
Snell Memorial Foundation |
| Coast Guard |
|
21 CFR 101.4(h)(2) |
IAPT Publication |
1994 |
International Code of Botanical Nomenclature
Archived
|
International Association for Plant Taxonomy |
| Coast Guard |
|
33 CFR 96.130(b) |
ASQ Q9001 |
1994 |
Quality Systems-Model for Quality Assurance in Design, Development, Production, Installation and Servicing
Archived
|
American Society of Quality Control |
| Coast Guard |
|
46 CFR 56.01-2(e)(30) |
ASTM A351/A 351M |
1994 |
Standard Specification for Castings, Austenitic, Sustenitic-Ferritic (Duplex) for Pressure Containing Parts
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table Note 3 |
ASTM Annual Book of Standards |
1994 |
Water and Environmental Technology--Section 11, Vols. 11.01 and 11.02
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(b)(4) |
ANSI/ASME B16.15 |
1994 |
Cast Bronze Threaded Fittings, Classes 125 and 250
Archived
|
American Society of Mechanical Engineers |
| Mine Safety and Health Administration |
|
30 CFR 56.14130(j) |
SAE J-1194 |
1994 |
Roll-Over Protective Structures for Wheeled Agricultural Tractors
Archived
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 160.171-3(b) |
ASTM D1004 |
1994 |
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.174-3(b) |
ASTM D1004 |
1994 |
Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
Archived
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1234.3(e)(2) |
NFPA 221 |
1994 |
Standard for Fire Walls and Fire Barrier Walls
Archived
|
National Fire Protection Association |
| National Archives and Records Administration |
|
36 CFR 1234.3(e)(4) |
NFPA 10 |
1994 |
Standard for Portable Fire Extinguishers
Archived
|
National Fire Protection Association |
| National Archives and Records Administration |
|
36 CFR 1238.5(e)(1) |
NAPM IT2.19 |
1994 |
American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density
Archived
|
National Association of Photographic Manufacturers |
| Coast Guard |
|
46 CFR 163.003-3 |
ASTM D1435 |
1994 |
Standard Practice for Outdoor Weathering of Plastics
Archived
|
ASTM International |
| Coast Guard |
|
33 CFR 183.5(b) |
ASTM D1621 |
1994 |
Standard Test Method for Compressive Properties of Rigid Cellular Plastics
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(104) |
ASTM D2622 |
1994 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(31) |
ASTM D323 |
1994 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 30.01-3(b)(1) |
ASTM D323 |
1994 |
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(153) |
ASTM D4239 |
1994 |
Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(83) |
ASTM F1548 |
1994 |
Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 161.002-1(b) |
FM Class No. 3260 |
1994 |
Flame Radiation Detectors for Automatic Fire Alarm Signaling
Archived
|
Factory Mutual Engineering and Research |
| Mine Safety and Health Administration |
|
30 CFR 57.14130(j) |
SAE J-1194 |
1994 |
Roll-Over Protective Structures for Wheeled Agricultural Tractors
Archived
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 110.10-1(g)(16) |
IEC 92-201 |
1994 |
Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition
Archived
|
International Electrotechnical Commission |
| Coast Guard |
|
21 CFR 165.110(b)(4)(iii)(E)(14)(i) |
EPA-600-4-91-010 |
1994 |
Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry
Archived
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
21 CFR 165.110(b)(4)(iii)(E)(14)(ii) |
EPA-600-4-91-010 |
1994 |
Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption 1994 HHS/FDA
Archived
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 420.6(b)(2) |
CABO Model Energy Code |
1993 |
Model Energy Code
Archived
|
Council of American Building Officials |
| Energy Department |
|
10 CFR 430.3(e)(9) |
ASHRAE 103 |
1993 |
Methods of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.15(e)(2)(vi) |
ISO/IEC Guide 65 |
1993 |
General requirements for bodies operating product certification systems
Archived
|
International Organization for Standardization / International Electrotechnical Commission |
| Energy Department |
|
10 CFR 431.15(b)(1) |
NEMA MG-1 |
1993 |
Motors and Generators
Archived
|
National Electrical Manufacturers Association |
| Energy Department |
|
10 CFR 440 Appendix A |
NFPA 70 |
1993 |
National Electrical Code
Archived
|
National Fire Protection Association |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1446 |
1993 |
Standard Test Method for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Archived
|
ASTM International |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
ASTM F1447 |
1993 |
Standard Specification for Protective Headgear Used in Bicycling
Archived
|
ASTM International |
| Federal Highway Administration |
|
23 CFR 625.4(b)(2) |
AASHTO Publication |
1993 |
Interim Specifications, Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Coast Guard |
|
33 CFR 183.5(b) |
ASTM D1622 |
1993 |
Standard Test Method for Apparent Density of Rigid Cellular Plastics
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(56) |
ASTM B161 |
1993 |
Standard Specification for Nickel Seamless Pipe and Tube
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(57) |
ASTM B165 |
1993 |
Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube
Archived
|
ASTM International |