| Environmental Protection Agency |
|
40 CFR 1065.1010(d)(1) |
IP-470 |
2005 |
Determination of aluminum, silicon, vanadium, nickel, iron, calcium, zinc, and sodium in residual fuels by atomic absorption spectrometry
Archived
|
Institue of Petroleum |
| Homeland Security Department |
|
6 CFR 37.17(e)(1) |
ISO/IEC 19794-5:2005(E) |
2005 |
Information technology—Biometric Data Interchange Formats—Part 5: Face Image Data
Archived
|
International Organization for Standardization / International Electrotechnical Commission |
| Homeland Security Department |
|
6 CFR 37.17(g)(1) |
AAMVA CDS |
2005 |
Driver's License/Identification Card Design Specifications, Annex A, section A.7.7.2
Archived
|
American Association of Motor Vehicle Administrators, Inc. |
| Public Health Service |
|
42 CFR 37.10(b)(1) |
AAPM On-Line Report No. 03 |
2005 |
Assessment of Display Performance for Medical Imaging Systems
Archived
|
American Association of Physicists in Medicine |
| Public Health Service |
|
42 CFR 37.10(e)(3) |
NCRP Report No. 147 |
2005 |
Structural Shielding Design for Medical X-Ray Imaging Facilities
Archived
|
National Council on Radiation Protection and Measurement |
| Coast Guard |
|
46 CFR 110.10-1(l)(3) |
NFPA 99 |
2005 |
Standard for Health Care Facilities
Archived
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 160.135-5(b)(6) |
ASTM B127 |
2005 |
Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip, (Reapproved 2009)
|
ASTM International |
| Coast Guard |
|
46 CFR 160.135-7(b)(7)(ii)(B) |
ASTM B127 |
2005 |
Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip, (Reapproved 2009)
|
ASTM International |
| Coast Guard |
|
46 CFR 162.050-4(c)(1) |
ISO 8217 |
2005 |
Petroleum products—Fuels (class F)—Specifications of marine fuels
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 162.050-20(a)(1) |
ISO 8217 |
2005 |
Petroleum products—Fuels (class F)—Specifications of marine fuels
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 162.050-20(a)(2) |
ISO 8217 |
2005 |
Petroleum products—Fuels (class F)—Specifications of marine fuels
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 162.060-5(c)(1) |
ISO/IEC 17025:2005(E) |
2005 |
General Requirements for the Competence of Calibration and Testing Laboratories, Second Edition
|
International Organization for Standardization / International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 162.060-36 |
ISO/IEC 17025:2005(E) |
2005 |
General Requirements for the Competence of Calibration and Testing Laboratories, Second Edition
|
International Organization for Standardization / International Electrotechnical Commission |
| Coast Guard |
|
46 CFR 164.120-5(b)(2) |
ASTM D570 |
2005 |
Standard Test Method for Water Absorption of Plastics
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(1)(vi) |
ASTM D570 |
2005 |
Standard Test Method for Water Absorption of Plastics
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(2) |
ASTM D570 |
2005 |
Standard Test Method for Water Absorption of Plastics
|
ASTM International |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B16.21 |
2005 |
Nonmetallic Flat Gaskets for Pipe Flanges
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(e) |
ASTM D95 |
2005 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D95 |
2005 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(e) |
ASTM D95 |
2005 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(iii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(ii)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, (3)(a)(v)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart ZZZZ, Table 4, Footnote (a) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10042 Anthracite coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10042 Bituminous coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10042 Coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10042 Lignite coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10042 Subbituminous coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10005(i)(4)(i) |
ASTM D95 |
2005 |
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10692 Free organic liquids |
ASTM D2216 |
2005 |
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11237 Coal |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11237 Natural gas (2) |
ASTM D1835 |
2005 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 4, (1)(c) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 4, (2)(c) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 4, (3)(b) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 4, (3)(d) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(e)(3)(iv)(C)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.772(h)(5)(iii) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(d)(3)(iv)(C)(1) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1282(g)(5)(iii) |
ASTM D6522 |
2005 |
Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(i) |
ASTM D2908 |
2005 |
Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(e)(2) |
ISO 15765-4:2005(E) |
2005 |
Road Vehicles—Diagnostics on Controller Area Networks (CAN)—Part 4: Requirements for emissions-related systems
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 98.74(c)(5) |
ASTM D3238 |
2005 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method 2005
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.274(b)(2)(i) |
TAPPI Method T650 |
2005 |
Solids Content of Black Liquor
|
Technical Association of the Pulp and Paper Industry |
| Environmental Protection Agency |
|
40 CFR 98.277(d) |
TAPPI Method T650 |
2005 |
Solids Content of Black Liquor
|
Technical Association of the Pulp and Paper Industry |
| Environmental Protection Agency |
|
40 CFR 98.276(c) |
TAPPI Method T650 |
2005 |
Solids Content of Black Liquor
|
Technical Association of the Pulp and Paper Industry |
| Environmental Protection Agency |
|
40 CFR 59.505(c) |
CAARB Method 310 |
2005 |
Determination of Volatile Organic Compounds (VOC) in Consumer Products and Reactive Organic Compounds in Aerosol Coating Products
|
California Air Resources Board |