This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Public Health Service | 42 CFR 84.43(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(9) | CGA S-1.2 | 1963 | Safety Release Device Standards-Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(2)(i) | ASME B&PV Code | 1963 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 91 Appendix A 3(a)(1) | RTCA Paper 23-63/DO-117 | 1963 | Standard Adjustment Criteria for Airborne Localizer and Glide Slope Receivers | Radio Technical Commission for Aeronautics | |
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Overall width | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Daylight opening | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1) | ASME B&PV Code | 1963 | Boiler and Pressure Vessel Code, Section III, and include the 1963 Edition through 1973 Winter Addenda, and the 1974 Edition (Division 1) through the 2004 Edition (Division 1) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(ii)(B) | CGA P-3 | 1963 | Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1963 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Mine Safety and Health Administration | 30 CFR 77.1109(a) | NFPA Publication | 1962 | Portable Fire Extinguisher Standards | National Fire Protection Association | |
Coast Guard | 46 CFR 160.047-3(c) | MIL-B-2766 | 1962 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.101(a) | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(2) | USPHS Publication 934 | 1962 | Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.6(p)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Labor Department | 41 CFR 50-204.75 | NCUTLO Code | 1962 | Uniform Vehicle Code, Chapters 10, 11, 12, and 14 | National Committee on Uniform Traffic Laws and Ordinances | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST CS 242 | 1962 | 1-3/4 inch Thick Steel Doors and Frames | National Institute of Standards and Technology, U.S. Department of Commerce | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 77.301(b) | NFPA Handbook | 1962 | Section 9, Installation of Pulverized Fuel Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | 1962 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Food and Drug Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
National Highway Traffic Safety Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.67 | CGA G-4 | 1962 | Oxygen | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.1103(a) | NFPA Publication | 1962 | Flammable and Combustible Liquids Standards | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(5) | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(14) | ASTM D 86 | 1962 | Test for Distillation of Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(ii) | AOAC Journal | 1961 | Oils, Fats, and Waxes, Vol. 44, Page 146 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.180(e)(2)(iii)(A) | SAE J-765 | 1961 | Recommended Practice for Crane Loading Stability Test Code | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(4) | API 12F | 1961 | Specification for Small Welded Production Tanks | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. |