| Environmental Protection Agency |
|
40 CFR 60.17(g)(10) |
ASTM A483 |
1964 |
Standard Specification for Silicomanganese
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(20) |
ASTM D129 |
1964 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(71) |
ASTM D1945 |
1964 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(55) |
ANSI Z21.30 |
1964 |
Requirements for Gas Appliances and Gas Piping Installations
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(16) |
SAE J-743a |
1964 |
Tractor Mounted Side Boom
|
Society of Automotive Engineers |
| Geological Survey |
|
30 CFR 402.13(b) |
OMB Circular A-67 |
1964 |
Coordination of Federal Activities in the Acquisition of Certain Water Data
|
U.S. Office of Management and Budget |
| Geological Survey |
|
30 CFR 402.13(c) |
OMB Circular A-67 |
1964 |
Coordination of Federal Activities in the Acquisition of Certain Water Data
|
U.S. Office of Management and Budget |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(8) |
SAE J-567b |
1964 |
Bulb Sockets
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(29) |
SAE J-902 |
1964 |
Passenger Car Windshield Defrosting Systems
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (6) |
SAE J-567b |
1964 |
Bulb Sockets
|
Society of Automotive Engineers |
| Labor Department |
86 FR 54611 |
29 CFR 1915 |
ANSI B7.1-1964 |
1964 |
Incorporation by Reference; Notice of Corrections
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(i) |
ASTM D1945 |
1964 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D129 |
1964 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.593(b)(2) |
ASTM E169 |
1963 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.485a(d)(1) |
ASTM E169 |
1963 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.66(d)(2) |
NIST Handbook 69 |
1963 |
Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Occupational Safety and Health Administration |
|
29 CFR 1926.152(i)(1)(iii)(A)(1) |
UL 80 |
1963 |
Standard for Steel Inside Tanks for Oil-Burner Fuel
|
Underwriters Laboratories, Inc. |
| National Highway Traffic Safety Administration |
|
49 CFR 571.104 S3 Daylight opening |
SAE Publication |
1963 |
SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(15) |
SAE J-602 |
1963 |
Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(49) |
SAE Publication |
1963 |
SAE Aerospace-Automotive Drawing Standards
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.104 S3 Shoulder room dimension |
SAE Publication |
1963 |
SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.108 S5.2 (1) |
SAE J-602 |
1963 |
Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units
|
Society of Automotive Engineers |
| Rural Utilities Service |
|
7 CFR 1755.97(b)(10) |
RUS Bulletin 345-180, Form 397a |
1963 |
Specification for Voice Frequency Repeaters and Voice Frequency Repeater Trunks
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Coast Guard |
|
46 CFR 162.028-3(e) |
MIL-STD-167 |
1963 |
Mechanical Vibrations of Shipboard Equipment
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.031-1(a)(1) |
FedSpec T-R-605B |
1963 |
Rope, Manila, and Sisal with 1973 Amendment 3
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
29 CFR 1926.6(h)(2) |
ANSI A10.4 |
1963 |
Safety Requirements for Workmen's Hoists
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(24) |
ANSI B31.1a |
1963 |
Addenda to Code for Pressure Piping
Archived
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(194) |
ASTM E169 |
1963 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(68) |
ANSI Z54.1 |
1963 |
Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(f)(9) |
API 2201 |
1963 |
Welding or Hot Tapping on Equipment Containing Flammables
Archived
|
American Petroleum Institute |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-2 |
1963 |
Specification for L-810 Obstruction Light
Archived
|
Federal Aviation Administration, U.S. Department of Transportation |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5345-5 |
1963 |
Specification for L-847 Circuit Selector Switch, 5,000 Volt 20 Ampere
Archived
|
Federal Aviation Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(7) |
CGA P-3 |
1963 |
Specifications, Properties, and recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(8) |
CGA S-1.1 |
1963 |
Safety Release Device Standards-Cylinders for Compressed Gases with 1965 Addenda
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(9) |
CGA S-1.2 |
1963 |
Safety Release Device Standards-Cargo and Portable Tanks for Compressed Gases
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(v)(1) |
TFI M-1 |
1963 |
Standards for the Storage and Handling of Agricultural Anhydrous Ammonia
Archived
|
Fertilizer Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(w)(2) |
UL 80 |
1963 |
Steel Inside tanks for Oil-Burner Fuel
Archived
|
Underwriters Laboratories, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(2)(i) |
ASME B&PV Code |
1963 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(1) |
ASME B&PV Code |
1962 |
Boiler and Pressure Vessel Code, Section VIII
Archived
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(14) |
ASTM D86 |
1962 |
Test for Distillation of Petroleum Products
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(k)(2) |
CGA C-8 |
1962 |
Standard for Requalification of ICC-3HT Cylinders
Archived
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(p)(1) |
NEMA EW-1 |
1962 |
Requirements for Electric Arc Welding Apparatus
Archived
|
National Electrical Manufacturers Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(9) |
NFPA 51B |
1962 |
Standard for Fire Protection in Use of Cutting and Welding Processes
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(t)(2) |
USPHS Publication 934 |
1962 |
Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual
Archived
|
U.S. Public Health Service, U.S. Department of Health and Human Services |
| Occupational Safety and Health Administration |
|
29 CFR 1926.152(i)(1)(iii)(A)(3) |
API 12B Supplement 1 |
1962 |
Specification for Bolted Production Tanks, Supplement 1
|
American Petroleum Institute |
| National Highway Traffic Safety Administration |
|
21 CFR 172.882(a) |
AOAC Publication |
1962 |
Spectrophotometric Measurements under Specification
Archived
|
AOAC International |
| Food and Drug Administration |
|
21 CFR 178.3530(a) |
AOAC Publication |
1962 |
Specification, Volume 45, page 66
Archived
|
AOAC International |
| Food and Drug Administration |
|
21 CFR 178.3620(b)(1)(ii) |
AOAC Publication |
1962 |
Specification, Volume 45, page 66
Archived
|
AOAC International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
NIST CS 242 |
1962 |
1-3/4 inch Thick Steel Doors and Frames
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 75.6(f)(2) |
API Bulletin 2509 B |
1961 |
Shop Testing of Automatic Liquid Level Gages
Archived
|
American Petroleum Institute |