| Environmental Protection Agency |
|
40 CFR 98.7(m)(5) |
EPA-453-R-95-017 |
1995 |
Protocol for Equipment Leak Emission Estimates
Archived
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 165.110(a)(2)(vii) |
The United States Pharmacopeia |
1995 |
United States Pharmacopeia 1995 HHS/FDA
Archived
|
U.S. Pharmacopeial Convention |
| Environmental Protection Agency |
|
40 CFR 92.5(b)(1) |
ASTM D86 |
1995 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 92.5(b)(5) |
ASTM D613 |
1995 |
Standard Test Method for Cetane Number of Diesel Fuel Oil
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 92.5(b)(7) |
ASTM D1319 |
1995 |
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(164) |
ASTM D4809 |
1995 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(22) |
ASTM D129 |
1995 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(28) |
ASTM D3238 |
1995 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(33) |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(34) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.330(e)(1)(ii) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 59.412(b)(1) |
ASTM C1315 |
1995 |
Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
Archived
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(a)(1) |
ACI Standard 318-95 |
1995 |
Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(a)(2) |
ACI 318R-95 |
1995 |
Commentary on Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(8) |
API MPMS |
1995 |
Chapter 2—Tank Calibration
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(30) |
API MPMS |
1995 |
Chapter 8—Sampling, Section 1—Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(31) |
API MPMS |
1995 |
Chapter 8—Sampling, Section 2—Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(43) |
API MPMS |
1995 |
Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1—Introduction
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.901(a)(1) |
ACI 318R-95 |
1995 |
Commentary on Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
| Agriculture Department |
86 FR 57015 |
7 CFR 1755 |
RUS Bulletin 1728H-702 |
1995 |
Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers
|
Rural Utilities Service, U.S. Department of Agriculture |
| Environmental Protection Agency |
86 FR 34308 |
40 CFR 1066 |
SAE J2071 (J2071_199406) |
1995 |
Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(e) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(a) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 1995 EPA/AP
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(e) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(a) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(e) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUU, Table 4, (8)(a)(i)(2)(a) |
ASTM D5790 |
1995 |
Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10005(i)(4)(iii) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.10005(i)(5)(i) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(ii) |
ASTM D3370 |
1995 |
Standard Practices for Sampling Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.2 |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.2.4.3(c) |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 82, Subart F, Appendix A, Section 5.1 |
ARI 700 |
1995 |
Appendix C to ARI Standard 700-1995: Analytical Procedures for ARI Standard 700-1995
|
Air Conditioning and Refrigeration Institute |
| Environmental Protection Agency |
|
40 CFR 98.123(d)(1)(i) |
EPA-453-R-95-017 |
1995 |
Protocol for Equipment Leak Emission Estimates
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.123(d)(1)(ii) |
EPA-453-R-95-017 |
1995 |
Protocol for Equipment Leak Emission Estimates
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.123(d)(1)(iii) |
EPA-453-R-95-017 |
1995 |
Protocol for Equipment Leak Emission Estimates
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.124(f)(2) |
EPA-453-R-95-017 |
1995 |
Protocol for Equipment Leak Emission Estimates
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(vii) |
ASTM D3238 |
1995 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(viii) |
ASTM D4057 |
1995 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(ix) |
ASTM D4177 |
1995 |
Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (75) |
APHA Method 3500-Zn B |
1995 |
Zinc, Zincon Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (2) |
EPA Method 507 |
1995 |
Nitrogen & Phosphorous Pesticides (Drinking Water)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (2) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (5) |
EPA Method 507 |
1995 |
Nitrogen & Phosphorous Pesticides (Drinking Water)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (5) |
EPA Method 525.2 |
1995 |
Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (5) |
USGS O-1126-95 |
1995 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID Footnote 11 |
USGS O-1126-95 |
1995 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (6) |
USGS O-1126-95 |
1995 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (8) |
USGS O-1126-95 |
1995 |
Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring
|
U.S. Geological Survey |