| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart Y |
1989 |
Administrative Code, Sections 215.582, 215.583, and 215.584
Archived
|
State of Illinois |
| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart Z |
1989 |
Administrative Code, Subpart Z
Archived
|
State of Illinois |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xix) |
USGS Publication |
1989 |
U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Laboratory Analysis, Chapter A4, Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples
Archived
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xv) |
USGS Publication |
1989 |
Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, by M.J. Fishman and Linda C. Friedman, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1
Archived
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(39) |
ASTM D396 |
1989 |
Standard Specification for Fuel Oils
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(39) |
ASTM D4891 |
1989 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(13) |
ASTM D2784 |
1989 |
Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(6) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
Archived
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(1)(ii) |
IMO Resolution A.811(19) |
1989 |
No title given
Archived
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(10) |
ASTM D1331 |
1989 |
Standard Test Method for Surface and Interfacial Tension of Solutions of Surface of Active Agents
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(49) |
ASTM D4082 |
1989 |
Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(53) |
ASTM D4256 |
1989 |
Standard Test Method for Determination of the Decontaminability of Coatings Used in Light-Water Nuclear Power Plants
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 194.5(a)(2) |
ASME NQA-1 |
1989 |
Quality Assurance Program Requirements for Nuclear Facilities
Archived
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 194.5(a)(4) |
ASME NQA-3 |
1989 |
Quality Assurance Program Requirements for the Collection of Scientific and Technical Information for Site Characterization of High-Level Nuclear Waste Repositories
Archived
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 52.742(d) |
35 I.A.C. 215, Subpart B |
1989 |
Administrative Code
Archived
|
State of Illinois |
| Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D3231 |
1989 |
Standard Test Method for Phosphorous in Gasoline
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D3231 |
1989 |
Standard Test Method for Phosphorous in Gasoline
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 76.4(b)(2) |
ASTM D3172 |
1989 |
Standard Practice for Proximate Analysis of Coal and Coke
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 76.4(b)(1) |
ASTM D3176 |
1989 |
Standard Practice for Ultimate Analysis of Coal and Coke
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(25) |
ASTM D3176 |
1989 |
Standard Practice for Ultimate Analysis of Coal and Coke
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.125(f) |
IIA Publication |
1989 |
Codification of Standards for the Professional Practice of Internal Auditing
Archived
|
Institute of Internal Auditors |
| Environmental Protection Agency |
|
40 CFR 59.110(a)(2) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 59.213(b)(3) |
SCAQMD Method 25.1 |
1989 |
Determination of Total Gaseous Non-Methane Organic Emissions as Carbon
Archived
|
South Coast Air Quality Management District |
| Environmental Protection Agency |
|
40 CFR 59.412(b)(2) |
ASTM D523 |
1989 |
Standard Test Method for Specular Gloss
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 430.3(c)(3) |
ANSI C78.21 |
1989 |
Electric Lamps--PAR and R Shapes
Archived
|
American National Standards Institute |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C720 |
1989 |
Spray Applied Fibrous Insulation for Elevated Temperature
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C728 |
1989 |
Standard Specification for Perlite Insulation Board
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C892 |
1989 |
High-temperature Fiber Blanket Insulation
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
NEMA DC-3 |
1989 |
Thermostats
Archived
|
National Electrical Manufacturers Association |
| Energy Department |
|
10 CFR 440 Appendix A |
UL 296 |
1989 |
Oil Burners
Archived
|
Underwriters Laboratories, Inc. |
| Food and Drug Administration |
|
21 CFR 177.1380(a)(4) |
ASTM D3275 |
1989 |
Standard Specification for E-CTFE-Flouroplastic Molding Extrusion and Coating Materials
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C570 |
1989 |
Standard Specification for Oil and Resin Based Caulking Compound for Building Construction
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
NFPA 58 |
1989 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
Archived
|
National Fire Protection Association |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM D4099 |
1989 |
Standard Specification for Poly Vinyl Chloride (PVC) Prime Windows/Sliding Glass Doors
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM E84 |
1989 |
Standard Test Method for Surface Burning Characteristics of Building Materials
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 440 Appendix A |
AAMA 1102.7 |
1989 |
Voluntary Specifications for Aluminum Storm Doors
Archived
|
American Architectural Manufacturers Association |
| Food and Drug Administration |
|
16 CFR 1203.53(b) |
CSA D113.2-M |
1989 |
Cycling Helmets
Archived
|
Canadian Standards Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AAMA 1102.7 |
1989 |
Voluntary Specifications for Aluminum Storm Doors
Archived
|
American Architectural Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 260.11(e)(1) |
API 2517 |
1989 |
Evaporation Loss From External Floating-Roof Tanks, Third Edition
Archived
|
American Petroleum Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 304R |
1989 |
Guide for Measuring, Mixing, Transporting and Placing Concrete
Archived
|
American Concrete Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 305R |
1989 |
Hot Weather Concreting
Archived
|
American Concrete Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI Z124.5 |
1989 |
Plastic Toilet Seats (Water Closet Seats)
Archived
|
American National Standards Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 301 |
1989 |
Specifications for Structural Concrete for Buildings
Archived
|
American Concrete Institute |
| Coast Guard |
|
21 CFR 173.357(a)(2) |
FDA Publication |
1989 |
Methodology for Ethylene-dichloride Detection in Polyethylenimine
Archived
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/BHMA A156.2 |
1989 |
Standard for Bored and Preassembled Locks and Latches
Archived
|
Builders Hardware Manufacturers Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 211.1 |
1989 |
Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete
Archived
|
American Concrete Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(d)(1) |
API 2517 |
1989 |
Evaporative Loss from External Floating-Roof Tanks, Third Edition
Archived
|
American Petroleum Institute |
| Minerals Management Service |
|
30 CFR 870.19 |
ASTM D2234 |
1989 |
Standard Practice for Collection of a Gross Sample of Coal
Archived
|
ASTM International |
| Minerals Management Service |
|
30 CFR 870.20 |
ASTM D2234 |
1989 |
Standard Practice for Collection of a Gross Sample of Coal
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM D1037 |
1989 |
Standard Test Method for Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials
Archived
|
ASTM International |