This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 162.028-3(e) | MIL-STD-167 | 1963 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(9) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(7) | CGA P-3 | 1963 | Specifications, Properties, and recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 60.485(d)(1) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(ii)(B) | CGA P-3 | 1963 | Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 80 | 1963 | Standard for Steel Inside Tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(194) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases and 1965 Addenda | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(68) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 29.1522 | FAA TSO-C77 | 1963 | Gas Turbine Auxiliary Power Units | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vi) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vii) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-ray and Sealed Gamma Ray Sources | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(8) | CGA S-1.1 | 1963 | Safety Release Device Standards-Cylinders for Compressed Gases with 1965 Addenda | Compressed Gas Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-5 | 1963 | Specification for L-847 Circuit Selector Switch, 5,000 Volt 20 Ampere | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(24) | ANSI B31.1a | 1963 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NIST CS 242 | 1962 | 1-3/4 inch Thick Steel Doors and Frames | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International | |
Mine Safety and Health Administration | 30 CFR 77.301(b) | NFPA Handbook | 1962 | Section 9, Installation of Pulverized Fuel Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | 1962 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(ii) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(14) | ASTM D 86 | 1962 | Test for Distillation of Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(2) | USPHS Publication 934 | 1962 | Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(p)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Labor Department | 41 CFR 50-204.67 | CGA G-4 | 1962 | Oxygen | Compressed Gas Association | |
Coast Guard | 46 CFR 160.047-3(c) | MIL-B-2766 | 1962 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(5) | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.1109(f) | NFPA Publication | 1962 | National Fire Protection Association Handbook, 12th Edition | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 77.1109(a) | NFPA Publication | 1962 | Portable Fire Extinguisher Standards | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(9) | NFPA 51B | 1962 | Standard for Fire Protection in Use of Cutting and Welding Processes | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 172.878(a)(3) | AOAC Journal | 1962 | Journal of the Association of Official Analytical Chemists, Volume 45, page 66 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.254(b)(1) | NEMA EW-1 | 1962 | Requirements for Electric Arc Welding Apparatus | National Electrical Manufacturers Association | |
Food and Drug Administration | 21 CFR 172.882(a) | AOAC Publication | 1962 | Spectrophotometric Measurements under Specification | AOAC International |