| Environmental Protection Agency |
|
40 CFR 141.131(c)(1) Table (Amperometric Titration) |
ASTM D1253 |
1996 |
Standard Test Method for Residual Chlorine in Water
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CGA C-6.2 |
1996 |
Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders
|
Compressed Gas Association |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
API 1604 |
1996 |
Closures of Underground Petroleum Storage Tanks
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 56.01-2(e)(20) |
ASTM A249/A 249M |
1996 |
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1350(a)(2) |
MTUIC regulations |
1996 |
Montana Regulatory Requirements Applicable to the Underground Injection Control Program
|
State of Montana |
| Environmental Protection Agency |
85 FR 49084 |
40 CFR 63 |
EPA SW-846-5031 |
1996 |
National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing Residual Risk and Technology Review
|
U.S. Environmental Protection Agency |
| Transportation Department |
87 FR 79752 |
49 CFR 174 |
ATAA 300 |
1996 |
Hazardous Materials: Editorial Corrections and Clarifications
|
Air Transport Association of America |
| Coast Guard |
|
46 CFR 164.120-5(d)(6) |
ISO 1172:1996(E) |
1996 |
Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 278.3(b)(1) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Consumer Product Safety Commission |
|
16 CFR 1630.4(b)(1)(iii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
| Coast Guard |
|
46 CFR 56.01-2(d)(21) |
ASME B16.34 |
1996 |
Valves--Flanged, Threaded, and Welding End
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D2502 |
1996 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
|
ASTM International |
| Energy Department |
|
10 CFR 434.701.1 RS-22 |
UL 727 |
1996 |
Oil-Fired Central Furnaces (RS-22)
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 193.30-1 |
NFPA 13 |
1996 |
Standard for the Installation of Sprinkler Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(127) |
ASTM D3246 |
1996 |
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 177.2450(b)(3) |
FDA Publication |
1996 |
Amide-Imide Polymer Content--Analysis of Monomer Content
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 97.01-2(b) |
ASTM Adjunct F1626 |
1996 |
Symbols Used in Accordance with Regulation II-2/20 of the 1974 SOLAS Convention as amended PCN: 12-616260-01
|
ASTM International |
| National Highway Traffic Safety Administration |
|
40 CFR 63.14(l)(4) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Public Health Service |
|
42 CFR 52b.12(b) |
SEAC Publication |
1996 |
Recommended Lateral Force Requirements and Commentary including Errata, November 1997
|
Structural Engineers Association of California |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(111) |
ASTM D2880 |
1996 |
Standard Specification for Gas Turbine Fuel Oils
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(29) |
ASTM D3246 |
1996 |
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
|
ASTM International |
| Energy Department |
|
10 CFR 434.701.1 RS-42 |
ANSI Z21.66 |
1996 |
Automatic Vent Damper Devices for Use with Gas-Fired Appliances (RS-42)
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 56.01-2(k)(12) |
MSS SP-69 |
1996 |
Pipe Hangers and Supports-Selection and Application
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Pentachlorophenol) |
EPA Method 515.3 |
1996 |
Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Extraction, Derivitization, and Gas Chromatography with Electron Capture Detection
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1450(a)(1)(v) |
ASTM D4536 |
1996 |
Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
|
American Society for Microbiology |
| Environmental Protection Agency |
89 FR 16820 |
40 CFR 60 |
ASTM D2879-96 |
1996 |
Standards of Performance for New, Reconstructed, and Modified Sources and Emissions Guidelines for Existing Sources: Oil and Natural Gas Sector Climate Review
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(21) |
ASTM A268/A 268M |
1996 |
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1234.3(d)(2) |
NAPM IT9.23 |
1996 |
Imaging Materials--Polyester Based Magnetic Tape--Storage
|
Association for Information and Image Management |
| Food and Drug Administration |
|
21 CFR 177.1810(c)(2)(ii) |
FDA Publication |
1996 |
Direct Reading Viscoelastometric Method for Determining Class Transition Points of Styrene Block Polymers
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 160.156-5(e)(2) |
ISO 1172:1996(E) |
1996 |
Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition
|
International Organization for Standardization |
| Food and Drug Administration |
|
21 CFR 172.859(b)(2) |
FDA Publication |
1996 |
Sucrose Fatty Acid Esters, Methods of Assay
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Environmental Protection Agency |
|
40 CFR 282.50(d)(1)(i)(A) |
ALUSTP |
1996 |
Alabama Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(viii) |
EPA Method 0011 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods (and in Basic Manual Update III)
|
U.S. Environmental Protection Agency |
| Consumer Product Safety Commission |
|
16 CFR 1631.4(b)(1)(iii) |
AATCC 124 |
1996 |
Appearance of Durable Press Fabrics After Repeated Home Laundering
|
American Association of Textile Chemists and Colorists |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM D4206 |
1996 |
Standard Test Method for Sustained Burning of Liquid Measures Using the Small Scale Open-Cup Apparatus
|
ASTM International |
| Federal Communications Commission |
88 FR 30654 |
47 CFR 74 |
ATSC 1.0 |
1996 |
Establishing Rules for Digital Low Power Television and Television Translator Stations
|
Advanced Television Systems Committee |
| Coast Guard |
|
46 CFR 160.151-27(c)(2) |
IMO Resolution A.689(17) |
1996 |
Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66)
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 94.5(c)(1) |
ISO 8178-1 |
1996 |
Reciprocating internal combustion engines—Exhaust emission measurement—Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 63.11980(a)(2)(i) |
EPA SW-846-8260B |
1996 |
Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C2 |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(44) |
ASTM B21 |
1996 |
Standard Specification for Naval Brass Rod, Bar, and Shapes
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(74) |
ASTM D1945 |
1996 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 9 |
ASM Applied and Environmenta Microbiology |
1996 |
Evaluation of Enterolert for Enumeration of Enterococci in Recreational Waters, by Budnick, G.E., Howard, R.T., and Mayo, D.R., 62:3881-3884
|
American Society for Microbiology |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1031 |
SAE J2452_199906 |
1996 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(1)(iii) |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C5 |
ASTM E729 |
1996 |
Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
|
ASTM International |
| Coast Guard |
|
33 CFR 154.106(h)(1) |
OCIMF Publication |
1996 |
International Safety Guide for Oil Tankers and Terminals (ISGOTT), Section 6.10, 4th Edition
|
Oil Companies International Marine Forum |
| Environmental Protection Agency |
85 FR 40594 |
40 CFR 260 |
SW-846 Test Methods 0051 |
1996 |
Modernizing Ignitable Liquids Determinations
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(20) |
ASTM E903 |
1996 |
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
|
ASTM International |
| Transportation Department |
87 FR 79752 |
49 CFR 172 |
ATAA 300 |
1996 |
Hazardous Materials: Editorial Corrections and Clarifications
|
Air Transport Association of America |