| Environmental Protection Agency |
|
40 CFR 63.11647(a)(3)(ii) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Veterans Affairs Department |
|
38 CFR 39.63 |
NFPA 70 |
2002 |
National Electric Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-12A, 8.4.4 |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Energy Department |
85 FR 56475 |
10 CFR 429 and 430 |
ANSI C82.2-2002 (R2007) |
2002 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
American National Standards Institute |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
SAE J2534_200202 |
2002 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Federal Railroad Administration |
|
49 CFR 227.103(h)(2) |
ANSI S1.43 |
2002 |
Specifications for Integrating-Averaging Sound Level Meters
|
American National Standards Institute |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11119–1(E) |
2002 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 60.2730(j) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E7 |
ASTM A691 |
2002 |
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IA Footnote 28 |
EPA-821-R-02-014 |
2002 |
Short-term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Marine and Estuarine Organisms, Third Edition
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(20)(v) |
IDEXX Test Methods |
2002 |
Quanti-Tray®/2000 Method
|
IDEXX Laboratories |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH Footnote 16 |
Quanti-Tray® Method |
2002 |
Quanti-Tray® Method
|
IDEXX Laboratories |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 12, 12(c) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix B, PS-12A, 8.4.6.1 |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (40) |
ASTM D5812 |
2002 |
Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
SAE J2534_200202 |
2002 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Federal Railroad Administration |
|
49 CFR 227.103(h)(3) |
ANSI S1.25 |
2002 |
Specification for Personal Noise Dosimeters
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Sulfate) |
ASTM D516 |
2002 |
Standard Test Method for Sulfate Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.244(b)(4)(v) |
ASTM D3176 |
2002 |
Standard Practice for Ultimate Analysis of Coal and Coke
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.155(g) |
Part No. 921022-000 |
2001 |
Parts List and Drawings, Subpart R, CRABI 12-Month-Old Infant Crash Test Dummy (CRABI-12, Alpha version)
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 56.01-2(d)(17) |
ASME B16.24 |
2001 |
Cast Copper Alloy Pipe Flanges and Flanged Fittings, Class 150, 300, 400, 600, 900, 1500, and 2500
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 63.25-9(a) |
ISO 13617 |
2001 |
Shipbuilding-Shipboard Incinerators—Requirements, Second Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(1)(ix) |
ASTM E1720 |
2001 |
Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 229.217(a) |
AAR S-5506 |
2001 |
Performance Requirements for Diesel Electric Locomotive Fuel Tanks
|
Association of American Railroads |
| Coast Guard |
|
46 CFR 160.115-5(b)(4) |
IMO MSC/Circular 980 |
2001 |
Standardized Life-saving Appliance Evaluation and Test Report Forms
|
International Maritime Organization |
| Homeland Security Department |
89 FR 76676 |
46 CFR 195 |
IMO MSC/ Circular 1006 |
2001 |
Marine Equipment on Board Vessels and Offshore Units or Facilities
|
International Maritime Organization |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B Note 3 |
ASTM E1590 |
2001 |
Standard Test Method for Fire Testing of Mattresses
|
ASTM International |
| Coast Guard |
|
46 CFR 52.01-140(d) |
ASME B&PV Code |
2001 |
Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 63.05-1(d)(1) |
ASTM F1323 |
2001 |
Standard Specification for Shipboard Incinerators
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) E1 |
MSS SP-44 |
2001 |
Steel Pipe Line Flanges
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| National Highway Traffic Safety Administration |
|
49 CFR 572.140(a)(1)(v) |
Drawing No. 210-5000-2(R) |
2001 |
Leg Assembly
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 162.161-2(d)(2) |
UL 2166 |
2001 |
Standard for Safety for Halocarbon Clean Agent Extinguishing System Units
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 282.61(d)(1)(i)(A) |
HIUSTP |
2001 |
Hawaii Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Hawaii |
| Safety and Environmental Enforcement Bureau |
83 FR 49262 |
30 CFR 250.880(b)(2) |
API RP 14C |
2001 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
EPA-821-R-01-013 |
2001 |
Appendix to EPA Method 1631, Total Mercury in Tissue, Sludge, Sediment, and Soil by Acid Digestion and BrCl Oxidation
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID Footnote 12 |
USGS O-2060-01 |
2001 |
Pesticides in Water by SPE and HPLC-MS. Official Name: Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by Graphitized Carbon-Based Solid-Phase Extraction and HPLC-MS
|
U.S. Geological Survey |
| Coast Guard |
|
46 CFR 56.70-15(d) |
ASME B31.1 |
2001 |
Power Piping ASME Code for Pressure Piping
|
American Society of Mechanical Engineers |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(1)(viii) |
ASTM E662 |
2001 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(viii) |
APHA Method 2120 |
2001 |
Color
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (24) |
Kelada-01, EPA 821-B-01-009 |
2001 |
Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 10 |
EPA-821-R-01-030 |
2001 |
EPA Method 1601: Male-specific (F+) and Somatic Coliphage in Water by Two-step Enrichment Procedure
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.364(e)(6) |
ASME MFC-18M |
2001 |
Measurement of Fluid Flow Using Variable Area Meters
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 162.161-6(c) |
UL 2127 |
2001 |
Standard for Safety for Inert Gas Clean Agent Extinguishing System Units
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 92.01-2(b)(1) |
IMO SOLAS |
2001 |
Consolidated Text of the International Convention for the Safety of Life at Sea, and its Protocol of 1988: Article, Annexes and Certificates. (Incorporating all Amendments in Effect from January 2001)
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(a) |
ASME B&PV Code |
2001 |
Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers
|
American Society of Mechanical Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.850 |
API RP 14C |
2001 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 141.707(c)(1) |
EPA Method 1622 |
2001 |
Cryptosporidium in Water by Filtration/IMS/FA
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 82414 |
40 CFR 82 |
ASME MFC–9M–1988(R2001) |
2001 |
Protection of Stratospheric Ozone: Updates Related to the Use of Ozone-Depleting Substances as Process Agents
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(58) |
ASTM D5066 |
2001 |
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E6 |
ASTM A672 |
2001 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
|
ASTM International |