| Environmental Protection Agency |
|
40 CFR 261.1063(d)(2) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9060A
|
U.S. Environmental Protection Agency |
| Federal Trade Commission |
|
16 CFR 460.5(e)(1)(ix) |
ASTM C1371 |
2004 |
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Energy Department |
|
10 CFR 431.293(b)(1) |
AHAM HRF-1 |
2004 |
Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers and Freezers
|
Association of Home Appliance Manufacturers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(f) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
SAE J1939/13_200403 |
2004 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 60.41c Coal |
ASTM D388 |
2004 |
Standard Classification of Coals by Rank
|
ASTM International |
| Coast Guard |
|
46 CFR 53.05-1(a) |
ASME B&PV Code |
2004 |
Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.485a(g)(5) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 178.3870(f)(6)(ii) |
FDA Publication |
2004 |
Determination of Softening Point of Solid Resins
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(48) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 227 Appendix E III A |
ANSI S3.6 |
2004 |
Specification for Audiometers
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 261.22(a)(2) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 1110A
|
U.S. Environmental Protection Agency |
| Food and Drug Administration |
|
21 CFR 177.1030(d)(2) |
FDA Publication |
2004 |
Extracted Acrylonitrile Monomer by Differential Pulse Polarography
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
ASME B36.19M |
2004 |
Stainless Steel Pipe
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1433(b)(2) |
ANSI B30.5, 5-1.1.2 |
2004 |
Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Structural Competence Governs Lifting Performance, paragraph (b)
|
American National Standards Institute |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 73 |
Uni-Dir-ATP-I02-040225 |
2004 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Consumer Technology Association |
| Environmental Protection Agency |
|
40 CFR 98.354(c) |
EPA 305-X-04-001 |
2004 |
NPDES Compliance Inspection Manual, Chapter 5, Sampling
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 164.120-5(d)(7) |
ISO 1183-1:2004(E) |
2004 |
Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition
|
International Organization for Standardization |
| Food and Drug Administration |
|
21 CFR 177.2480(d)(2)(i) |
FDA Publication |
2004 |
Formaldehyde Release and Formaldehyde Analysis
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Coast Guard |
|
46 CFR 172.020(b)(3) |
IMO Resolution MEPC.117(52) |
2004 |
Amendments to the Annex of the Protocol of 1978 Relating to the International Convention for the Prevention of Pollution from Ships
|
International Maritime Organization |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(l)(4) |
ASME B30.14 |
2004 |
Side Boom Tractors
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(16) |
ASTM D2505 |
2004 |
Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 6.1.2(g) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
SAE J1939/13_200403 |
2004 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Coast Guard |
|
46 CFR 172.070 |
IMO Resolution MEPC.117(52) |
2004 |
Amendments to the Annex of the Protocol of 1978 Relating to the International Convention for the Prevention of Pollution from Ships
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 53.05-2(a) |
ASME B&PV Code |
2004 |
Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers
|
American Society of Mechanical Engineers |
| Federal Communications Commission |
80 FR 33442 |
47 CFR 2.948 (e) |
ISO/IEC 17011 |
2004 |
Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies
|
International Organization for Standardization |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1440(c) |
ASME B30.14 |
2004 |
Side Boom Tractors
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C1 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1060.810(a) Table 1 |
ASTM D2862 |
2004 |
Standard Test Method for Particle Size Distribution of Granular Activated Carbon
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 224.103(b) |
ASTM D4956 |
2004 |
Standard Specification for Retroreflective Sheeting for Traffic Control
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
UN Publication |
2004 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
|
United Nations |
| Environmental Protection Agency |
|
40 CFR 63.14(o)(2)(iv) |
EPA Method 9095B |
2004 |
Paint Filter Liquids Test, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (34) |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(17) |
ASTM D2597 |
2004 |
Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 227 Appendix E III B |
ANSI S3.6 |
2004 |
Specification for Audiometers
|
American National Standards Institute |
| Federal Communications Commission |
|
47 CFR 2.962(c)(3) |
ISO/IEC 17025 |
2004 |
Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies
|
International Organization for Standardization |
| Occupational Safety and Health Administration |
|
29 CFR 1926.1433(b)(3) |
ANSI B30.5, 5-1.2 |
2004 |
Safety Code for Crawler, Locomotive and Truck Cranes, Stability Backward and Forward
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (36) |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
ASTM Annual Book of Standards |
2004 |
Water and Environmental Technology, Section 11.01
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.251(q) Subbituminous coal |
ASTM D388 |
2004 |
Standard Classification of Coals by Rank
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(3)(xvii) |
EPA Method 1010 A |
2004 |
Test Methods for Flash Point by Pensky-Martens Closed-Cup Tester (and in Basic Manual Update IIIB)
|
U.S. Environmental Protection Agency |
| Energy Department |
|
10 CFR 431.63(b)(1) |
AHAM HRF-1 |
2004 |
Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers
|
Association of Home Appliance Manufacturers |
| Environmental Protection Agency |
|
40 CFR 63.457(b)(5)(i) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(73) |
ISO 10432:2004 |
2004 |
Specification for Subsurface Safety Valve Equipment
|
International Organization for Standardization |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
SAE J1939/13_200403 |
2004 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 60.485(g)(5) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 172.841(b) |
Food Chemicals Codex |
2004 |
Polydextrose
|
National Academy Press |