| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xxx) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(56) |
API RP 14C |
2007 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.11980(a)(2)(ii) |
EPA SW-846-8270D |
2007 |
Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH (7) |
APHA Method 9230 C |
2007 |
Fecal Streptococcus and Enterococcus Groups, Membrane Filter Techniques
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(46) |
ASTM D2879 |
2007 |
Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 272.201(c)(1)(i) |
ARHWMP |
2007 |
EPA Approved Arkansas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of Arkansas |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(8) |
SAE J-1939 |
2007 |
Recommended Practice for a Serial Control and Communications Vehicle Network
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(37) |
ASTM D3370 |
2007 |
Standard Practices for Sampling Water from Closed Conduits
|
ASTM International |
| Energy Department |
90 FR 4589 |
10 CFR 430 |
IES LM–79–08–DD |
2007 |
Energy Conservation Program: Test Procedure for General Service Lamps
|
Illuminating Engineering Society of North America |
| Federal Communications Commission |
|
47 CFR 73.682(d) |
ATSC A/53 |
2007 |
Digital Television Standard
|
Advanced Television Systems Committee |
| Federal Communications Commission |
86 FR 23614 |
47 CFR 20 |
ANSI C63.19-2007 |
2007 |
Standards for Hearing Aid-Compatible Handsets
|
American National Standards Institute |
| Federal Railroad Administration |
|
49 CFR 232.603(b) |
AAR S-4240 |
2007 |
ECP Brake Equipment—Approval Procedures
|
Association of American Railroads |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(6) |
ASTM D910 |
2007 |
Standard Specification for Aviation Gasolines
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(1)(vii) |
ASTM D2583 |
2007 |
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(26) |
ASTM D3828 |
2007 |
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
|
ASTM International |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ANSI Z21.75-2007/CSA 6.27-2007 (R2012) |
2007 |
Manufactured Home Construction and Safety Standards
|
Canadian Standards Association |
| Homeland Security Department |
87 FR 68270 |
46 CFR 169 |
ASTM F1003-02(2007) |
2007 |
Survival Craft Equipment-Update to Type Approval Requirements
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.254(e)(2) |
ASTM D240 |
2007 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(7) |
EPA SW-846-8015C |
2007 |
Nonhalogenated Organics by Gas Chromatography, Revision 3
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xv) |
ASTM D1126 |
2007 |
Standard Test Method for Hardness in Water
|
ASTM International |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ASTM D4442–07 |
2007 |
Manufactured Home Construction and Safety Standards
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(d)(3)(ii) |
ASTM D790 |
2007 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(48) |
API RP 2D |
2007 |
Recommended Practice for Operation and Maintenance of Offshore Cranes
|
American Petroleum Institute |
| Energy Department |
85 FR 56475 |
10 CFR 429 |
ANSI C82.2-2002 (R2007) |
2007 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
American National Standards Institute |
| Veterans Affairs Department |
|
38 CFR 76.1 |
IPC Document |
2007 |
International Paralympic Committee (IPC) Classification Code and International Standards
|
International Paralympic Committee |
| Environmental Protection Agency |
|
40 CFR 80.46(d) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 232.603(a) |
AAR S-4210 |
2007 |
ECP Cable-Based Brake System Cable, Connectors, and Junction Boxes—Performance Specifications
|
Association of American Railroads |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(27) |
ASTM D240 |
2007 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
|
ASTM International |
| Energy Department |
88 FR 21816 |
10 CFR 429 |
ANSI/ASHRAE 127-2007 |
2007 |
Energy Conservation Program: Test Procedure for Computer Room Air Conditioners
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Coast Guard |
|
46 CFR 164.120-7, Table 164.120-7(c)(3)(i) |
ASTM D2583 |
2007 |
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
|
ASTM International |
| Federal Communications Commission |
86 FR 23614 |
47 CFR 68 |
ANSI C63.19-2007 |
2007 |
Standards for Hearing Aid-Compatible Handsets
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.156-11(c)(2)(i)(B) |
ASTM D790 |
2007 |
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 244(b)(4)(vi) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart AAAAAAA, Table 3, (6) |
EPA SW-846-8270D |
2007 |
Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (30) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 55.14(d)(16)(i) |
40 CFR part 52, subpart HH |
2007 |
State of New York Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
| Federal Railroad Administration |
|
49 CFR 229 Appendix F Human Factors II (b)(5)(ii) |
ANSI/HFS 100 |
2007 |
Human Factors Engineering of Computer Workstations
|
Human Factors and Ergonomics Society |
| National Highway Traffic Safety Administration |
|
49 CFR 571.106 S12.17(b) |
ASTM IRM 903 |
2007 |
Immersion Oil
|
ASTM International |
| Homeland Security Department |
87 FR 68270 |
46 CFR 184 |
ASTM F1003-02(2007) |
2007 |
Survival Craft Equipment-Update to Type Approval Requirements
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(6) |
EPA SW-846-7471B |
2007 |
Mercury In Solid Or Semisolid Waste (Manual Cold-Vapor Technique), Revision 2
|
U.S. Environmental Protection Agency |
| Energy Department |
80 FR 42663 |
10 CFR 431.76 (d)(2) |
ASHRAE 103 |
2007 |
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
EPA SW-846-6010C |
2007 |
Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 3
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 563.5 Stability control |
FMVSS No. 126 |
2007 |
Electronic stability control systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(f) |
ASTM D4208 |
2007 |
Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11980(a)(2)(iv) |
EPA SW-846-8015C |
2007 |
Nonhalogenated Organics by Gas Chromatography, Revision 3
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(16) |
EPA SW-846-9056 |
2007 |
Determination of Inorganic Anions by Ion Chromatography, Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
ASTM D4606 |
2007 |
Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (33) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Research and Special Programs Administration |
|
45 CFR 162.920(a)(10) |
ASC X12 |
2007 |
Type 1 Errata to Health Care Claim Dental (837), Standards for Electronic Data Interchange Technical Report Type 3
|
Washington Publishing Company |
| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(ii) |
ASTM D3370 |
2007 |
Standard Practices for Sampling Water
|
ASTM International |