| Environmental Protection Agency |
|
40 CFR 60, Appendix F, Procedure 3, 10.6(1)(i) |
ASTM D6216 |
2012 |
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
|
ASTM International |
| Environmental Protection Agency |
88 FR 10468 |
40 CFR 770 |
ANSI A135.4-2012 |
2012 |
Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 272.1851(c)(1)(i) |
OKHWMP |
2012 |
EPA-Approved Oklahoma Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of Oklahoma |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1051 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1039 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 176 |
2012 |
Carriage by Vessel
|
U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 161.006-4(k) |
NSSC 43B11 |
2012 |
Bolts, nuts, studs, and tap-rivets
|
Navy Supply Systems Command |
| Environmental Protection Agency |
|
40 CFR 80.47(h)(1) |
ASTM D86 |
2012 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1037.610(a) |
USEPA Publication |
2012 |
Greenhouse Gas Emissions Model (GEM) simulation tool, Version 2.0.1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 2 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 160.013-1(b)(1) |
Drawing No. 160.013-1 |
2012 |
Hatchet (Lifeboat and Liferaft)
|
U.S. Coast Guard |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(4) |
ASTM D381 |
2012 |
Standard Test Method for Gum Content in Fuels by Jet Evaporation
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 600.011(b)(2) |
ASTM D1298 |
2012 |
Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(k)(2) |
COS Safety Publication COS-2-03 |
2012 |
Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations
|
Center for Offshore Safety |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
ASTM D1298–12b |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1068 |
CARB LEV III Evaporative Emission Standards for Model Year 2015 and Later Vehicles |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
State of California, California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 80.8(e)(1)(i) |
ASTM D4057 |
2012 |
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM International |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AWC 2012–Design Values for Joists and Rafters |
2012 |
Manufactured Home Construction and Safety Standards
|
American Wood Council |
| Energy Department |
80 FR 42663 |
10 CFR 431.76 (f) |
ANSI Z21.47 |
2012 |
Standard for Gas-fired Central Furnaces
|
American National Standards Institute |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
IEEE 1202-2006 |
2012 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Coast Guard |
|
46 CFR 160.055-1(a)(5) |
46 CFR 164.015 |
2012 |
Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes
|
U.S. Coast Guard |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 56.01-2(e)(17) |
ASTM A214/A 214M |
2012 |
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21977 |
30 CFR 250.730 (c) |
API Standard 53 |
2012 |
Blowout Prevention Equipment Systems for Drilling Wells
|
American Petroleum Institute |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1068 |
ASTM D3237–12 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Coast Guard |
|
46 CFR 160.055-1(b) |
Drawing No. 160.055-1A, Sheet 2 |
2012 |
Life Preservers, Unicellular Plastic Foam, Adult, Construction and Arrangement, Vinyl Dip Coated, Model 66, Child
|
U.S. Coast Guard |
| Environmental Protection Agency |
85 FR 78412 |
40 CFR 80 |
ASTM D445-12 |
2012 |
Fuels Regulatory Streamlining
|
ASTM International |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11119–1:2012(E) |
2012 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 86.113-94(b)(2) |
ASTM D86 |
2012 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
AISI S100–12 |
2012 |
Manufactured Home Construction and Safety Standards
|
American Iron and Steel Institute |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 39.1005(e)(1) |
IEC 60309-1 |
2012 |
Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 1: General Requirements, Edition 4.2 2012-06
|
International Electrotechnical Commission |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1065 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 29440 |
40 CFR 1039 |
ASTM D6348-12 |
2012 |
Greenhouse Gas Emissions Standards for Heavy-Duty Vehicles-Phase 3
|
ASTM International |
| Environmental Protection Agency |
88 FR 18396 |
40 CFR 51 |
ASTM D6348-03(2010) |
2012 |
Testing Provisions for Air Emission Sources
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 2.960(b) |
ISO/IEC 17065 |
2012 |
Conformity assessment—Requirements for bodies certifying products, processes and services
|
International Organization for Standardization |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM A53/A53M–12 |
2012 |
Updates to Marine Engineering Standards
|
ASTM International |
| Coast Guard |
|
46 CFR 160.077-23(h)(5) |
UL 1517 |
2012 |
Hybrid Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 60, Appendix F, Procedure 3, 16.2 |
ASTM D6216 |
2012 |
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
|
ASTM International |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME B31G-2012 |
2012 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 272.1851(c)(1) |
OKHWMP |
2012 |
State of Oklahoma Statutes and Regulations for Approved State Hazardous Waste Management Programs
|
State of Oklahoma |
| Environmental Protection Agency |
88 FR 10468 |
40 CFR 770 |
ANSI A135.5-2012 |
2012 |
Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products
|
American National Standards Institute |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1036 |
SAE J1025_201208 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
ASTM D445–12 |
2012 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
ASTM International |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 177 |
2012 |
Carriage by Public Highway
|
U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 161.006-4(k) |
NSSC 42S5 |
2012 |
Screws, machine, cap and set, and nuts
|
Navy Supply Systems Command |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(6) |
ASTM D525 |
2012 |
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
|
ASTM International |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1066 |
GEM version 2.0.1 |
2012 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(k)(3) |
COS Safety Publication COS-2-04 |
2012 |
Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations
|
Center for Offshore Safety |