| Coast Guard |
|
46 CFR 61.03-1(b) |
ASTM D665 |
1998 |
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.174-3(b) |
ASTM D975 |
1998 |
Standard Specification for Diesel Fuel Oils
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.171-3(b) |
ASTM D975 |
1998 |
Standard Specification for Diesel Fuel Oils
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(4) |
ASME MFC-6M |
1998 |
Measurement of Fluid Flow in Pipes Using Vortex Flow Meters
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 59.01-2(b)(4) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 175.600(b) Table |
Lloyd's Publication |
1998 |
Rules and Regulations for the Classification of Yachts and Small Craft
Archived
|
Lloyd's Register of Shipping |
| Coast Guard |
|
46 CFR 54.01-1(e)(1) |
MSS SP-25 |
1998 |
Standard Marking System for Valves, Fittings, Flanges and Unions
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Coast Guard |
|
46 CFR 56.01-2(k)(3) |
MSS SP-25 |
1998 |
Standard Marking System for Valves, Fittings, Flanges and Unions
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Housing and Urban Development Department |
|
24 CFR 100.201a(b)(2) |
ICC/ANSI A117.1 |
1998 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Housing and Urban Development Department |
|
24 CFR 100.201 Accessible |
ICC/ANSI A117.1 |
1998 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Housing and Urban Development Department |
|
24 CFR 100.201 Accessible route |
ICC/ANSI A117.1 |
1998 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Housing and Urban Development Department |
|
24 CFR 100.201 Building entrance on an accessible route |
ICC/ANSI A117.1 |
1998 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Housing and Urban Development Department |
|
24 CFR 100.205(e)(1) |
ICC/ANSI A117.1 |
1998 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Housing and Urban Development Department |
|
24 CFR 200.952(b) |
UM Bulletin 70b |
1998 |
Particalwood Interior Stair Treads
|
U.S. Department of Housing and Urban Development |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(86) |
API MPMS |
1998 |
Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition
|
American Petroleum Institute |
| Geological Survey |
|
30 CFR 401.12(c)(1)(iv) |
OMB Circular No. A-110 |
1998 |
Uniform Administrative Requirements for Grants and Agreements with Institutions of Higher Education, Hospitals and other Nonprofit Organizations
|
U.S. Office of Management and Budget |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.7(b)(11) |
SAE J-1318 |
1998 |
Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles
|
Society of Automotive Engineers |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.40(d)(2) |
FMVSS 121 |
1998 |
Air Brake Systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.40(e) |
FMVSS 105 |
1998 |
Hydraulic and Electric Brake Systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.40(e) |
FMVSS 121 |
1998 |
Air Brake Systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.40(f)(2) |
FMVSS 105 |
1998 |
Hydraulic and Electric Brake Systems
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Federal Railroad Administration |
|
49 CFR 227 Appendix F |
NIOSH Publication No. 98-126 |
1998 |
Criteria for a Recommended Standard: Occupational Exposure to Noise
|
National Institute for Occupational Safety and Health |
| Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(6)(i) |
IEC 61508-1 |
1998 |
Part 1: General requirements
|
International Electrotechnical Commission |
| Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(6)(iii) |
IEC 61508-3 |
1998 |
Part 3: Software requirements
|
International Electrotechnical Commission |
| Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(6)(iv) |
IEC 61508-4 |
1998 |
Part 4: Definitions and abbreviations
|
International Electrotechnical Commission |
| Federal Railroad Administration |
|
49 CFR 229 Appendix F Verification Guidance (a)(6)(v) |
IEC 61508-5 |
1998 |
Part 5: Examples of methods for the determination of safety integrity levels
|
International Electrotechnical Commission |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B Note 11 |
ASTM E162 |
1998 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B Note 12 |
ASTM E162 |
1998 |
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(12) |
ASTM D471 |
1998 |
Standard Test Method for Rubber Property—Effect of Liquids
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(k)(2) |
NHTSA Drawing Package, SAS-100-1000 |
1998 |
Standard Seat Belt Assembly with Addendum A, Seat Base Weldment (consisting of drawings and a bill of materials)
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 571.106 S9.2.8 |
ASTM D471 |
1998 |
Standard Test Method for Rubber Property--Effect of Liquids
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(d)(22) |
ASME B16.42 |
1998 |
Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 151.01-2 |
ASTM D4986 |
1998 |
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 164.015-1(a)(4) |
ASTM D4986 |
1998 |
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 32.01-1(c)(1) |
ASTM D4986 |
1998 |
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 38.01-3(b) |
ASTM D4986 |
1998 |
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.176-4(b) |
ASTM D975 |
1998 |
Standard Specification for Diesel Fuel Oils
Archived
|
ASTM International |
| Coast Guard |
|
40 CFR 1065.1010(e)(4) |
ISO 3675 |
1998 |
Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method
Archived
|
International Organization for Standardization |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM E84 |
1998 |
Standard Test Method for Surface Burning Characteristics of Building Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 151.01-2(b) |
ASTM E84 |
1998 |
Standard Test Method for Surface Burning Characteristics of Building Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ASTM E84 |
1998 |
Standard Test Method for Surface Burning Characteristics of Building Materials
Archived
|
ASTM International |
| Coast Guard |
|
33 CFR 154.106(d)(5) |
ASTM F1155 |
1998 |
Standard Practice for Selection and Application of Piping System Materials
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 54.01-1(b)(1) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 56.01-2(d)(3) |
ASME B&PV Code |
1998 |
Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications
Archived
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 110.10-1(f)(5) |
IEEE 45 |
1998 |
Recommended Practice for Electrical Installations on Shipboard
Archived
|
Institute of Electrical and Electronics Engineers |
| Coast Guard |
|
46 CFR 110.10-1(o)(4) |
UL 83 |
1998 |
Thermoplastic-Insulated Wires
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
21 CFR 172.736(b)(4) |
FDA Publication |
1998 |
Determination of Ethylene Oxide and 1,4-Dioxane by Headspace Gas Chromatography
Archived
|
Food and Drug Administration, U.S. Department of Health and Human Services |
| Energy Department |
|
10 CFR 431.105(b) |
CSA 4.3-M |
1998 |
Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous
Archived
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(13)(i) |
AOAC Official Methods |
1998 |
Official Methods of Analysis, 16th Edition, 4th Revision
Archived
|
AOAC International |
| Coast Guard |
|
46 CFR 8.110(b) |
Lloyd's Publication |
1998 |
Rules and Regulations for the Classification of Ships
Archived
|
Lloyd's Register of Shipping |