| National Highway Traffic Safety Administration |
|
49 CFR 572.142(a) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(1)(ii) |
ASTM D2724 |
1987 |
Standard Test Method for Bonded, Fused, and Laminated Apparel Fabrics
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M081 |
1987 |
Left leg assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 60.41c Natural gas (2) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.122(a) |
Drawing No. 78051-339 |
1987 |
Pivot Pin--Neck Transducer
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b) |
Drawing No. 880105-100X |
1987 |
Head Assembly
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(e) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(12) |
Drawing No. SA-SID-M080 |
1987 |
Leg Assembly, Right
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 3 |
EPA-520-5-84-006 |
1987 |
Radiochemistry Procedures Manual
|
U.S. Environmental Protection Agency |
| Energy Department |
88 FR 40406 |
10 CFR 431 |
ASTM E97-82 (1987) |
1987 |
Energy Conservation Program: Test Procedure for Consumer Water Heaters and Residential-Duty Commercial Water Heaters
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(c)(2)(i) |
Drawing No. 78051-43 |
1987 |
Upper leg assembly
|
General Motors Corporation |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM B193 |
1987 |
Standard Test Method for Resistivity of Electrical Conductor Materials
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.136(b)(1) |
Drawing No. 880105-528R |
1987 |
Sliding knee assembly, right
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(94) |
ASTM E776 |
1987 |
Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.146(j) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| Coast Guard |
|
33 CFR 183.5(b) |
UL 1114 |
1987 |
Marine (USCG Type A) Flexible Fuel Line Hose
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 58.03-1(d)(2) |
ANSI B31.5 |
1987 |
Refrigeration Piping
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(3) |
EPA Method 200.7 |
1987 |
Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.16(a)(2) |
Drawing No. SA 103C 002 |
1987 |
Title not specified
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(f) |
Drawing No. 78051-218 |
1987 |
Hybrid III Anthropomorphic Test Dummy, Revision T
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. 127-4030-2 |
1987 |
Right foot assembly
|
Reprographic Technologies |
| Rural Utilities Service |
|
7 CFR 1755.522(a)(6) |
Bellcore TR-TSY-000508 |
1987 |
Automatic Message Accounting, Section 8.1, Issue 2
|
Bell Communications Research |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(i) |
Drawing No. SA-572-S14 |
1987 |
Femur load transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(67) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.1401(a)(1) |
NEUIC regulations |
1987 |
Nebraska Environmental Protection Act, Revised Statutes of Nebraska sections 81-1502, 81-1506, 81-1519, and 81-1520
|
State of Nebraska |
| National Highway Traffic Safety Administration |
|
49 CFR 572.127(h) |
Drawing No. 127-0000 |
1987 |
Technical drawings and specifications package
|
Reprographic Technologies |
| Energy Department |
|
10 CFR 440 Appendix A |
ASTM C920 |
1987 |
Standard Specification for Elastomeric Joint Sealants
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M070 |
1987 |
Right arm assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.122(a) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.133(b) |
Drawing No. 880105-250 |
1987 |
Neck Assembly
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (18) Nitrate |
WC Method B-1011 |
1987 |
Waters Test Method for Determination of Nitrite/Nitrate in Water Using Single Column Ion Chromatography
|
Waters Corp. |
| National Highway Traffic Safety Administration |
|
49 CFR 572.35(c)(2)(i) |
Drawing No. 78051-44 |
1987 |
Upper leg assembly
|
General Motors Corporation |
| Environmental Protection Agency |
|
40 CFR 147.1700(a)(3) |
NCUIC regulations |
1987 |
Water and Air Resources, N.C. GEN. STAT. §§ 143-211 through 143-215.10 (1987 and Cumm. Supp. 1989)
|
State of North Carolina |
| National Highway Traffic Safety Administration |
|
49 CFr 572.136(b)(1) |
Drawing No. 880105-528L |
1987 |
Sliding knee assembly, left
|
Reprographic Technologies |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASHRAE Handbook |
1987 |
HVAC Systems and Applications
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(9) |
Drawing No. SA-572-S10 |
1987 |
Force sensing device
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 58 Appendix E, 12.0(29) |
EPA-450-4-87-009 |
1987 |
Optimum Network Design and Site Exposure Criteria for Particulate Matter, Koch, R.C. and H.E. Rector. EPA Contract No. 68-02-3584
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(4) |
EPA Method 1 |
1987 |
Sample and Velocity Traverses for Stationary Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xvii) |
USGS Publication |
1987 |
Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Wershaw, R.L., et al, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 60.17(l)(1) |
ISO 8316 |
1987 |
Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank
|
International Organization for Standardization |
| National Highway Traffic Safety Administration |
|
49 CFR 572.36(h) |
Drawing No. 78051-265 |
1987 |
Title not specified
|
General Motors Corporation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.126(b) |
Drawing No. SA-572-S10 |
1987 |
Femur load transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.137(i) |
Drawing No. SA-572-S29 |
1987 |
Multiple axis femur force/moment transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.155(b) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M010 |
1987 |
Head assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.143(c)(2) |
Drawing No. 9001336 |
1987 |
Jam Nut
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 147.1251(a)(4) |
MSUIC regulations |
1987 |
State of Mississippi Oil and Gas Board Statewide Rules and Regulations, Rules 1 through 65, inclusive (Aug. 1, 1987, as amended, Sept. 17, 1987)
|
State of Mississippi |
| Coast Guard |
|
33 CFR 140.7(b) |
UL 1123 |
1987 |
Marine Buoyant Devices
|
Underwriters Laboratories, Inc. |
| Environmental Protection Agency |
|
40 CFR 75.6(c)(1) |
ISO 8316:1987(E) |
1987 |
Measurement of Liquid Flow in Closed Conduits-Method by Collection of the Liquid in a Volumetric Tank
|
International Organization for Standardization |