| Environmental Protection Agency |
|
40 CFR 136.6(b)(4)(v) |
EPA Method 1638 |
1996 |
Determination of Trace Elements in Ambient Waters by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table Note 3 |
Annual Book of Standards |
1996 |
Annual Book of ASTM Standards, Vols. 11.01 and 11.02
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.694(c)(1)(iii) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(c) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(c) |
EPA SW-846-3050 |
1996 |
Acid Digestion of Sediments, Sludges, and Soils
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(c) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 2(c) |
EPA SW-846-3050 |
1996 |
Acid Digestion of Sediments, Sludges, and Soils
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(c) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1208(b)(1)(i)(B)(3) |
EPA Method 0023A |
1996 |
Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans Emissions from Stationary Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.7700(b) |
EPA Method 9095A |
1996 |
Paint Filter Liquids Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.7765 Free organic liquids |
EPA Method 9095A |
1996 |
Paint Filter Liquids Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.7944(b)(1) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart JJJJJJ, Table 5, (1)(c) |
EPA SW-846-3050B |
1996 |
Acid Digestion of Sediments, Sludges, and Soils, Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.773(d)(5)(ii)(C) |
GRI-95/0368.1 |
1996 |
Atmospheric Rich/Lean Method for Determining Glycol Dehydrator Emissions
|
Gas Research Institute |
| Environmental Protection Agency |
|
40 CFR 63.1282(a)(2)(i) |
GRI-95/0368.1 |
1996 |
Atmospheric Rich/Lean Method for Determining Glycol Dehydrator Emissions
|
Gas Research Institute |
| Environmental Protection Agency |
|
40 CFR 63.11960(e)(1)(i) |
EPA SW-846-8260B |
1996 |
Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.11960(e)(1)(iii) |
EPA SW-846-8315A |
1996 |
Determination of Carbonyl Compounds by High Performance Liquid Chromatography (HPLC), Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.11980(a)(2)(i) |
EPA SW-846-8260B |
1996 |
Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.11980(a)(2)(iii) |
EPA SW-846-8315A |
1996 |
Determination of Carbonyl Compounds by High Performance Liquid Chromatography (HPLC), Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.12005 Maximum True Vapor Pressure (3) |
ASTM D2879 |
1996 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart HHHHHHH, Table 10 |
EPA SW-846-8315A |
1996 |
Determination of Carbonyl Compounds by High Performance Liquid Chromatography (HPLC), Revision 1
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63, Subpart HHHHHHH, Table 10 |
EPA SW-846-8260B |
1996 |
Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS), Revision 2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.1450(a)(1)(v) |
ASTM D4536 |
1996 |
Standard Test Method for High-Volume Sampling for Solid Particulate Matter and Determination of Particulate Emissions
|
American Society for Microbiology |
| Environmental Protection Agency |
|
40 CFR 63.1001 Note to In Light Liquid Service |
ASTM D2879 |
1996 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.1020 Note to In Light Liquid Service |
ASTM D2879 |
1996 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(21) |
ASTM D2502 |
1996 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(b)(1) |
ASME MFC-3M |
1996 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D2502 |
1996 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(20) |
ASTM E903 |
1996 |
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(2) |
CAARB Publication |
1996 |
California Regulatory Requirements Applicable to the National Low Emission Vehicle Program
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 98.354(c) |
EPA 833-B-96-003 |
1996 |
NPDES Permit Writers' Manual, Section 7.1.3, Sample Collection Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147, Subpart BB, Appendix A(b) |
MTUIC regulations |
1996 |
Administrative Rules of Montana Board of Oil and Gas Conservation, Chapter 22
|
State of Montana |
| Environmental Protection Agency |
|
40 CFR 147.1350(a)(1) |
MTUIC regulations |
1996 |
Montana Statutory Requirements Applicable to the Underground Injection Control Program
|
State of Montana |
| Environmental Protection Agency |
|
40 CFR 147.1350(a)(2) |
MTUIC regulations |
1996 |
Montana Regulatory Requirements Applicable to the Underground Injection Control Program
|
State of Montana |
| Environmental Protection Agency |
|
40 CFR 243.200-1(e)(1) |
ANSI Z245.60 |
1996 |
Waste Containers—Compatibility Dimensions
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 264.190(a) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 246.1034(d)(i)(iii) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 246.1063(d)(2) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 265.190(a) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 265.314(c) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 266.106(g)(1) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 266, Appendix IX, 1.8(b) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 266, Appendix IX, 4.0 |
EPA Method 0023A |
1996 |
Sampling Method for Polychlorinated Dibenzo-p-dioxins and Polychlorinated Dibensofuran Emmissions from Stationary Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 278.3(b)(1) |
EPA SW-846 |
1996 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 282.50(d)(1)(i)(A) |
ALUSTP |
1996 |
Alabama Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 282.50(d)(1)(i)(B) |
ALUSTP |
1996 |
Alabama Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Alabama |
| Environmental Protection Agency |
|
40 CFR 282.56(d)(1)(i)(B) |
CTUSTP |
1996 |
Connecticut Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of Connecticut |
| Environmental Protection Agency |
|
40 CFR 282.74(d)(1)(i)(B) |
MSUSTP |
1996 |
Mississippi Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of Mississippi |
| Environmental Protection Agency |
|
40 CFR 282.91(d)(1)(i)(B) |
SDUSTP |
1996 |
South Dakota Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of South Dakota |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (1) |
ASTM D5673 |
1996 |
Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry
|
ASTM International |