| Environmental Protection Agency |
|
40 CFR 98.7(m)(8) |
EPA Publication |
2008 |
Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(9) |
EPA AP 42, Section 5.2 |
2008 |
AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(44) |
ASTM D5614 |
2008 |
Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 87.8(b)(1) |
ICAO Annex 16 |
2008 |
Environmental Protection, Volume II—Aircraft Engine Emissions, Third Edition
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(35) |
ASTM D7430 |
2008 |
Standard Practice for Mechanical Sampling of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1065.1010(f)(1) |
NIST Special Publication 811 |
2008 |
Guide for the Use of the International System of Units (SI)
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 80.46(h)(1)(iv) |
ASTM D3120 |
2008 |
Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
|
ASTM International |
| Coast Guard |
|
14 CFR 34.1 Characteristic level Footnote 1 |
ICAO Annex 16 |
2008 |
Environmental Protection, Appendix 6
|
International Civil Aviation Organization |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(36) |
ASTM D7459 |
2008 |
Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(h)(1) |
NLA Publication |
2008 |
CO2 Emissions Calculation Protocol for the Lime Industry—English Units Version, February 5, 2008 Revision
|
National Lime Association |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(31) |
ASTM D6609 |
2008 |
Standard Guide for Part-Stream Sampling of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(27) |
ASTM D5373 |
2008 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(47) |
ASTM D7359 |
2008 |
Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 80.1101(d)(3) |
IEC Publications |
2008 |
Individual IEC Publications IBR
|
International Electrotechnical Commission |
| Coast Guard |
|
45 CFR 162.920(a)(16) |
ASC X12 |
2008 |
Errata to Health Care Services Review—Request for Review and Response (278)
|
Washington Publishing Company |
| Coast Guard |
|
45 CFR 162.920(a)(18) |
ASC X12 |
2008 |
Standards for Electronic Data Interchange Technical Report Type 3—Health Care Eligibility Benefit Inquiry and Response (270/271)
|
Washington Publishing Company |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ICAO Publication |
2008 |
Technical Instructions for the Safe Transport of Dangerous Goods by Air
|
International Civil Aviation Organization |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(32) |
ASTM D6751 |
2008 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
| Coast Guard |
|
33 CFR 155.140(c)(6) |
ASTM F1779 |
2008 |
Standard Practice for Reporting Visual Observations of Oil on Water
|
ASTM International |
| Coast Guard |
|
33 CFR 155.140(e)(1) |
NFPA 1001 |
2008 |
Standard for Fire Fighter Professional Qualifications
|
National Fire Protection Association |
| Coast Guard |
|
33 CFR 155.140(e)(5) |
NFPA 1561 |
2008 |
Standard on Emergency Services Incident Management System
|
National Fire Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(2) |
AWPA A2 |
2008 |
Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(3) |
AWPA A3 |
2008 |
Standard Methods for Determining Penetration of Preservatives and Fire Retardants
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(11) |
AWPA P5 |
2008 |
Standard for Waterborne Preservatives
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(12) |
AWPA P8 |
2008 |
Standard for Oil-Borne Preservatives
|
American Wood Protection Association |
| Coast Guard |
|
45 CFR 162.920(a)(17) |
ASC X12 |
2008 |
Errata to Health Care Claim Status Request and Response (276/277)
|
Washington Publishing Company |
| Coast Guard |
|
33 CFR 154.106(d)(8) |
ASTM F1779 |
2008 |
Standard Practice for Reporting Visual Observations of Oil on Water
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(50) |
API RP 2I |
2008 |
In-Service Inspection of Mooring Hardware for Floating Structures
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(31) |
API MPMS |
2008 |
Chapter 10, Section 3
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(52) |
API RP 2SK |
2008 |
Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(58) |
API RP 14F |
2008 |
Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(68) |
ANSI/API Spec. Q1 |
2008 |
Specification for Quality Programs for the Petroleum and Natural Gas Industry
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(74) |
ANSI/API Spec. 17J |
2008 |
Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(i)(5) |
ASTM C595 |
2008 |
Blended Hydraulic Cements
|
ASTM International |
| Veterans Affairs Department |
|
38 CFR 17.1(b)(7) |
NFPA 25 |
2008 |
Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
|
National Fire Protection Association |
| Veterans Affairs Department |
|
38 CFR 17.1(b)(8) |
NFPA 30 |
2008 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 160.151-5(c)(1) |
Federal Standard 595C |
2008 |
Colors Used in Government Procurement
|
General Services Administration |
| Coast Guard |
|
33 CFR 154.106(g)(2) |
NFPA 70 |
2008 |
National Electrical Code
|
National Fire Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(c)(2) |
ANSI O5.3 |
2008 |
American National Standard for Wood Poles and Wood Products, Solid Sawn-Wood Crossarms & Braces—Specifications & Dimensions
|
American National Standards Institute |
| Public Health Service |
|
42 CFR 37.10(c)(1) |
ACR Publication |
2008 |
ACR Practice Guideline for Diagnostic Reference Levels in Medical X-Ray Imaging, (Resolution 3)
|
American College of Radiology |
| Coast Guard |
|
46 CFR 34.01-15(c)(2) |
NFPA 2001 |
2008 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 147.7(d)(1) |
NFPA 2001 |
2008 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 160.076-11(b)(3) |
UL 1191 |
2008 |
UL Standard for Safety for Components for Personal Flotation Devices, Fourth Edition including revisions through August 24, 2011
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 160.132-5(b)(1) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 160.132-5(b)(2) |
ASTM A216/A 216M |
2008 |
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
|
ASTM International |
| Coast Guard |
|
46 CFR 160.132-7(b)(1)(i) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 160.132-7(b)(1)(ii) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 160.132-7(b)(1)(iii) |
ASTM A216/A 216M |
2008 |
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
|
ASTM International |
| Coast Guard |
|
46 CFR 160.133-5(b)(1) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Coast Guard |
|
46 CFR 160.133-5(b)(2) |
ASTM A276 |
2008 |
Standard Specification for Stainless Steel Bars and Shapes
|
ASTM International |