This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 55.14(e)(5)(i)(A) | 40 CFR part 52, subpart I | 2008 | State of Delaware Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(vii) | AASHTO/AWS D1.5M/D1.5 | 2015 | Bridge Welding Code | American Association of State Highway and Transportation Officials | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 536 | 1993 | Ductile Iron Castings | ASTM International | |
Coast Guard | 46 CFR 160.171-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 116.439(e) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.11.3(a) | ASTM E 298 | 1968 | Standard Methods for Assay of Organic Peroxides | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(iii) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Coast Guard | 46 CFR 160.055-5(c)(3) | Drawing No. 160.055-1B, Sheet 3 | 2012 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 67, Child | U.S. Coast Guard | |
Minerals Management Service | 30 CFR 250.1202(g)(3) | API MPMS | 2013 | Chapter 12, Section 2, Part 3 | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(A)(5) | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 179.220-7(e) | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 435.5(a) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 431.75(b)(4) | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Public Health Service | 42 CFR 37.10(b)(5) | AAPM Report No. 93 | 2006 | Acceptance Testing and Quality Control of Photostimulable Storage Phosphor Imaging Systems | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(6) | ASTM B 456 | 1979 | Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 40 CFR 60.116b(f)(2)(i) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(135) | ASTM D 3370 | 1976 | Standard Practices for Sampling Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(23) | ANSI O1.1 | 1961 | Safety Code for Woodworking Machinery | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (29) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(1)(i)(C) | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section B Total Coliform Methods, 4 Most Probable Number (MPN) Method, page 114 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430.02(g) | NCASI Method CP-86.07 | 2002 | Chlorinated Phenolics in Water by In situ Acetylation and GC/MS Determination | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 80.47(p)(3)(iii) | ASTM D 6792 | 2013 | Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories | ASTM International | |
Food and Drug Administration | 21 CFR 26.60(b) | ISO Guide 2 | 1996 | Standardization and Related Activities-General Vocabulary of the ISO and IEC | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 63.5160(c) | ASTM D 2697 | 1998 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Federal Trade Commission | 16 CFR 311.4 | API 1509 | 1995 | Engine Oil Licensing and Certification System | American Petroleum Institute | |
Federal Trade Commission | 16 CFR 311.4 | API 1509 | 2002 | Engine Oil Licensing and Certification System | American Petroleum Institute | |
Federal Communications Commission | 47 CFR 15.120(d)(1) | EIA-608 | 1994 | Recommended Practice for Line 21 Data Service | Electronic Industries Association | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(i)(A) | ASTM D 56 | 1987 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Coast Guard | 46 CFR 25.45-2(b)(5)(ii) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-4, Method 7, Section 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(3) | MCC Publication | 1998 | Method for Measuring the Ester Distribution of Sucrose Oligoesters | Mitsubishi Chemical Corporation | |
Coast Guard | 33 CFR 126.5(b) | NFPA 14 | 1996 | Standard for the Installation of Standpipe and Hose Systems | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(c) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Coast Guard | 46 CFR 171.012(b)(2) | IMO Resolution MSC 267(85) | 2008 | Adoption of the International Code on Intact Stability, 2008 (2008 IS Code) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Housing and Urban Development Department | 24 CFR 200.925c(c)(1) | BOCA National Mechanical Code | 1993 | BOCA National Mechanical Code | Building Officials and Code Administrators International | |
Environmental Protection Agency | 40 CFR 60.17(g)(11) | ASTM A 483 | 1988 | Standard Specification for Silicomanganese | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(5)(i) | ASTM F 2412 | 2005 | Standard Test Methods for Foot Protection | ASTM International | |
Coast Guard | 46 CFR 162.027-3(a) | ASTM F 1546 | 2012 | Standard Specification for Firehose Nozzles | ASTM International | |
Coast Guard | 46 CFR 160.133-5(b)(6) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.181 Table A | Drawing No. 175-6000 | 2009 | Pelvis Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 3972 | 2002 | Standard Test Method for Isotopic Uranium in Water by Radiochemistry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D 5453 | 2005 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 11.1.1 | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 16 CFR 1615.32(a)(1) Note 6 | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
National Archives and Records Administration | 36 CFR 1234.12(r) | NFPA 40 | 1997 | Standard for the Storage and Handling of Cellulose Nitrate Motion Picture Film | National Fire Protection Association | |
Coast Guard | 7 CFR 1755.704(b)(1)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association |