This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 479 | 2011 | Standard Specification for In-Service Care of Insulating Blankets | ASTM International | |
Federal Railroad Administration | 49 CFR 238 Appendix B (b) Special Optical Area | ASTM E 662 | 2001 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUU, Table 4, (4)(a)(i)(2)(b) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.943(a)(1) | UM Bulletin 38j | 1979 | Grademarking of Lumber | U.S. Department of Housing and Urban Development | |
Housing and Urban Development Department | 24 CFR 3285.4(f)(1) | AWPA M4 | 2002 | Standard for the Care of Preservative-Treated Wood Products | American Wood Preservers Institute | |
Rural Utilities Service | 7 CFR 1755.910(d)(6)(ii) | ASTM A 526/A 526M | 1990 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(5)(ii) | APHA Method 4500-Cl D | 1995 | Chlorine, Amperometric direct | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (44) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
Coast Guard | 46 CFR 160.151-5(f)(1) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
Coast Guard | 46 CFR 39.1005(b)(1) | ANSI B16.5 | 1981 | Steel Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
National Highway Traffic Safety Administration | 49 CFR 571.3(b), Seating reference point (4) | SAE J-826 | 1987 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.17(G)(161) | ASTM D 4468 | 2000 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(5)(i) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 434.402.1.2.1(a) | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Energy Department | 10 CFR 435.4(a)(2)(i) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 434.701.1 RS-39 | ANSI Z21.10.3 | 1993 | Gas Water Heaters (RS-39) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 5174 | 2002 | Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 1072 | 1980 | Standard Test Method for Total Sulfur in Fuel Gases | ASTM International | |
Energy Department | 10 CFR 430.3(f)(1) | ASME A112.18.1M | 1996 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-15(e)(1)(iii) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1043.20 Annex VI | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Coast Guard | 46 CFR 167.40-1(a)(3) | IEEE 45 | 1948 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(119) | ASTM D 3176 | 1974 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(1) | APHA Method 303F | 1980 | Determination of Mercury by the Cold Vapor Technique, Standard Methods for the Examination of Water and Wastewater, 15th Edition | American Public Health Association | |
National Archives and Records Administration | 36 CFR 1234, Appendix B, 2.m | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(b)(2) | AATCC Publication | 2013 | AATCC Gray Scale for Evaluating Change in Color | American Association of Textile Chemists and Colorists | |
Coast Guard | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
Occupational Safety and Health Administration | 29 CFR 1910.134(i)(1)(ii) | CGA G-7.1 | 1989 | Commodity Specification for Air | Compressed Gas Association | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 114.600(b) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(5) | Drawing No. SA-SID-M060 | 1994 | Title not specified | Reprographic Technologies | |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.177(b)(1) | ASTM A 372/A 372M | 2003 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 111.105-31(e) | IEC 60092-502 | 1999 | Electrical Installation in Ships, Part 502: Tankers—Special Features | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix A-4, Method 6, Section 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Coast Guard | 33 CFR 183.5(b) | ASTM D 1622 | 1993 | Standard Test Method for Apparent Density of Rigid Cellular Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1867-12(a) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(3) | UL 142 | 1968 | Steel Aboveground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(X) | EPA Method 1658 | 1993 | Phenoxy Acid Herbicides by Liquid/Liquid Extraction, Derivitization, and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | AOAC Method 974.27 | 1990 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 86.1(g)(21) | SAE J-2012 | 2002 | Diagnostic Trouble Code Definitions Equivalent to ISO/DIS 15031-6 | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.1302(b)(2)(ii) | ASC X12N 278 | 2006 | Health Care Services Review--Request for Review and Response | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 200.925c(c)(1) | BOCA Natinoal Plumbing Code | 1993 | BOCA National Plumbing Code | Building Officials and Code Administrators International | |
Environmental Protection Agency | 40 CFR 60.17(g)(111) | ASTM D 2880 | 1996 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 147.2201(a)(1) | TXUIC regulations | 1984 | Injection Well Act, Texas Water Code Annotated sections 27.031 and 27.033 (Vernon Supp. 1984) | State of Texas |