This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.300(a)(4) | COUIC regulations | 1989 | Oil and Gas Conservation Commission Revised Rules and Regulations in the 300, 400, 500, and 600 series, effective March 20, 1989. | State of Colorado | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3517 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.10.1 | 1998 | Gas Water Heaters—Volume 1, Storage Water Heaters with Input Ratings of 75,000 BTU per hour or Less with Addendum Z21.10.1a-2000. | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.901(d)(11) | ASTM C 595 | 2008 | Blended Hydraulic Cements | ASTM International | |
Coast Guard | 46 CFR 111.33-5(b) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Research and Special Programs Administration | 49 CFR 192.619(a)(1)(i) | ASME B31.8 | 2004 | Gas Transmission and Distribution Piping Systems | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1550(d)(2)(i) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(6)(ii) | EPA-600-4-79-020 | 1983 | Method 220.1--Atomic Absorption: direct aspiration | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 127.005, Definitions--Fire Endurance Rating | NFPA 251 | 1990 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (15) | ASTM D 1252A | 2006 | Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water, Test Method A-Macro COD by Reflux Digestion and Titration | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.11(b) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Homeland Security Department | 6 CFR 27.204(a)(2) | NFPA 704 | 2007 | Standard System for the Identification of the Hazards of Materials for Emergency Response | National Fire Protection Association | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-B-1418 | 1951 | Blades, Razor, Safety | U.S. Department of Defense | |
Coast Guard | 46 CFR 175.600(b) Table | UL 710 | 1993 | Exhaust Hoods For Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Energy Department | 10 CFR 430 Subpart B, App. F, 1.3 | ANSI/ASHRAE 16 | 2009 | Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.133-15(e) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.184(b)(2) | Drawing No. 175-3015 | 2009 | Elastic shoulder cord | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1160-76 | 1977 | Radioruthenium, dissolved, as ruthenium-106. Distillation method | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60 Subpart LLLL, Table 1, Mercury | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(7) | API RP 2A-WSD | 2000 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(3)(i) | EPA Method 552.1 | 1992 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Ion Exchange Liquid-Solid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7421 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.15(e)(2)(iv) | ISO/IEC Guide 28 | 1990 | General rules for a model third-party certification system for products | International Organization for Standardization / International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.01-2(e)(71) | ASTM F 1007 | 2007 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application | ASTM International | |
Federal Communications Commission | 47 CFR 15.38(b)(11) | IEC CISPR Publication 22 | 1997 | Information Technology Equipment--Radio Disturbance Characteristics--Limits and Methods of Measurement | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM E 29 | 1990 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(i) | EPA Method 1631 | 2002 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-25 | 1977 | Visual Approach Slope Indicator (VASI) Systems (Through change 1, 1977) | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.10(a) | Drawing No. SA 150 M080 | 1987 | Right Leg Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 111.75-20(a) | UL 1598A | 2000 | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.485(d)(1) | ASTM E 168 | 1992 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(40) | ASTM D 5291 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Coast Guard | 46 CFR 110.10-1(g)(26) | IEC 60092-502 | 1999 | Electrical Installation in Ships, Part 502: Tankers—Special Features | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.19(a) | Drawing No. SA 103C 002 | 1987 | Title not specified | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (57) | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.7(d)(2) | ASME MFC-4M | 1997 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 431.63(b)(2) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1414(b)(1) | ANSI B30.5 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (64) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 629 | 1993 | Cyanazine by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200.945(a)(1)(ii) | ASTM D 1335 | 1967 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Dimethyl sulfoxide) | EPA Method 1671 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Gas Chromatography/ Flame Ionization Detector | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.950(a)(4)(ii) | LAUIC regulations | 1978 | Supplement to Statewide Order No. 29-M (October 2, 1978) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (2)(c) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International |