| Environmental Protection Agency |
|
40 CFR 60.17(g)(166) |
ASTM D4810 |
1988 |
Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(12) |
ASTM D2709 |
1988 |
Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 194.5(a)(1) |
NUREG 1297 |
1988 |
Peer Review for High Level Nuclear Waste Repositories
Archived
|
U.S. Nuclear Regulatory Commission |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(10) |
ASTM E926 |
1988 |
Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals, Test Method C--Bomb, Acid Digestion Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(g)(4) |
ISO/TR 15349-1 |
1988 |
Unalloyed steel—Determination of low carbon content. Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation), First Edition
Archived
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(5) |
ASTM D524 |
1988 |
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 272.1651(c)(1) |
NYHWMP |
1988 |
New York State Statutes and Regulations for Approved State Hazardous Waste Management Programs
Archived
|
State of New York (NY) |
| Environmental Protection Agency |
|
40 CFR 75.6(f)(3) |
API MPMS |
1988 |
Chapter 4, Section 3
Archived
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 38.01-3(b) |
ASNT RP SNT-TC-1A |
1988 |
Personnel Qualification and Certification for Nondestructive Testing
Archived
|
American Society for Nondestructive Testing |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(3) |
ASTM D2267 |
1988 |
Standard Test Method for Aromatics in Light Naphthas and Aviation Gasoline by Gas Chromatography
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(7) |
ASTM E168 |
1988 |
Standard Practices for General Techniques of Infrared Quantitative Analysis
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(2) |
ASTM D2369 |
1987 |
Standard Test Method for Volatile Content of Coatings
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(d)(24) |
ASME B18.2.2 |
1987 |
Square and Hex Nuts (Inch Series)
Archived
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(7) |
ASTM D3980 |
1987 |
Standard Practice for Interlaboratory Testing of Paint and Related Materials
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 52.742(a)(4) |
ASTM D4017 |
1987 |
Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(a)(12) |
ASTM D4734 |
1987 |
Standard Specification for Refined Benzene--545
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(iv) |
EPA Method 8260 |
1987 |
Gas Chromatography/Mass Spectrometry for Volatile Organics: Capillary Column Technique
Archived
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 161.010-1(b) |
UL 1196 |
1987 |
Standard for Floating Waterlights
Archived
|
Underwriters Laboratories, Inc. |
| Federal Communications Commission |
|
47 CFR 68.317(g) |
EIA-470-A |
1987 |
Telephone Instruments with Loop Signaling
Archived
|
Electronic Industries Association |
| Coast Guard |
|
46 CFR 67.13(b) |
DOC Publication 55DC |
1987 |
Codes for Named Populated Places, Primary County Divisions, and Other Locational Entities of the United States and Outlying Areas
Archived
|
U.S. Department of Commerce |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(33)(xvii) |
USGS Publication |
1987 |
Methods for the Determination of Organic Substances in Water and Fluvial Sediments, Wershaw, R.L., et al, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A3
Archived
|
U.S. Geological Survey |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(90) |
ASTM D2369 |
1987 |
Standard Test Method for Volatile Content of Coatings
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(16) |
ASTM E258 |
1987 |
Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(93) |
ASTM E711 |
1987 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(94) |
ASTM E776 |
1987 |
Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61.18(d)(1)(i) |
EPA Method 8020 |
1987 |
Aromatic Volatile Organics
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(4) |
ASTM D482 |
1987 |
Standard Test Method for Ash from Petroleum Products
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 761.19(a)(3) |
ASTM D240 |
1987 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(3) |
EPA-600-1-87-014 |
1987 |
Occurrence of Pathogens in Distribution and Marketing Municipal Sludges
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 52.742(c) |
SIC Manual |
1987 |
Standard Industrial Classification Manual
Archived
|
U.S. Government Printing Office |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(2) |
ASTM A99 |
1987 |
Standard Specification for Ferromanganese
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(54) |
ASTM D1266 |
1987 |
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(67) |
ASTM D1835 |
1987 |
Standard Specification for Liquefied Petroleum (LP) Gases
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(103) |
ASTM D2622 |
1987 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(8) |
ASTM E169 |
1987 |
Standard Practice for General Techniques of Ultraviolet-Visible Quantitative Analysis
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 2 |
1987 |
Industry Standard for Wood Windows
Archived
|
National Wood Window and Door Association |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/NWWDA I.S. 1 |
1987 |
Industry Standard for Wood Flush Doors
Archived
|
National Wood Window and Door Association |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(13) |
Drawing No. SA-SID-M081 |
1987 |
Leg Assembly, Left
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
49 CFR 572.110(a)(12) |
Drawing No. SA-SID-M080 |
1987 |
Leg Assembly, Right
Archived
|
Reprographic Technologies |
| National Highway Traffic Safety Administration |
|
9 CFR 78.1(a)(9) |
ATS Publication |
1987 |
CITER Brucella Abortus Antibody Test Kit Instructions
Archived
|
AgriTech Systems, Inc. |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
RFCI Publication |
1987 |
Recommended Installation Specification for Vinyl Composition, Solid Vinyl, and Asphalt Tile Floorings
Archived
|
Resilient Floor Covering Institute |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C10 |
ASTM D2513 |
1987 |
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings
Archived
|
ASTM International |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(1)(ii) |
ASTM D2724 |
1987 |
Standard Test Method for Bonded, Fused, and Laminated Apparel Fabrics
Archived
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M080 |
1987 |
Right leg assembly
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M081 |
1987 |
Left leg assembly
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M070 |
1987 |
Right arm assembly
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| National Highway Traffic Safety Administration |
|
49 CFR 572.5(b) |
Drawing No. SA 150 M020 |
1987 |
Neck assembly
Archived
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 147.7(f)(1) |
UL 30 |
1987 |
Standard for Metal Safety Cans
Archived
|
Underwriters Laboratories, Inc. |
| Coast Guard |
|
46 CFR 56.01-2(k)(13) |
MSS SP-72 |
1987 |
Ball Valves with Flanged or Butt-Welding Ends for General Service
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Rural Utilities Service |
|
7 CFR 1755.390(a)(7) |
ASTM A505 |
1987 |
Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled
Archived
|
ASTM International |