| Energy Department |
|
10 CFR 431.293(b)(2) |
ASHRAE 32.1 |
2004 |
Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 431.293(b)(1) |
AHAM HRF-1 |
2004 |
Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers and Freezers
Archived
|
Association of Home Appliance Manufacturers |
| Energy Department |
|
10 CFR 431.63(b)(1) |
AHAM HRF-1 |
2004 |
Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers
Archived
|
Association of Home Appliance Manufacturers |
| Coast Guard |
|
46 CFR 110.10-1(o)(14) |
UL 1203 |
2004 |
Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
Archived
|
Underwriters Laboratories, Inc. |
| Energy Department |
|
10 CFR 433.3(b)(1) |
ASHRAE 90.1 |
2004 |
Energy Standard for Buildings Except Low-Rise Residential Buildings
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(37) |
ASTM D388 |
2004 |
Standard Classification of Coals by Rank
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.7(c)(2) F2 |
NFPA 58 |
2004 |
Standard for the Storage and Handling of Liquefied Petroleum Gases
Archived
|
National Fire Protection Association |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.7(c)(2) G1 |
PPI TR-3 |
2004 |
Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Pressure Design Basis (PDB), Strength Design Basis (SDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe
Archived
|
Plastics Pipe Institute, Inc. |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(182) |
ASTM D6420 |
2004 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(186) |
ASTM D6667 |
2004 |
Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(k)(1)(iv) |
EPA Method 9095B |
2004 |
Paint Filter Liquids Test, Revison 2
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(45) |
ASTM D6667 |
2004 |
Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(48) |
ASTM D7036 |
2004 |
Standard Practice for Competence of Air Emission Testing Bodies
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(n)(4) |
NCASI Method IM/CAN/WP-99.02 |
2004 |
Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities
Archived
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(17) |
ASTM D2597 |
2004 |
Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(g)(1) |
ISO 3170 |
2004 |
Petroleum liquids—Manual sampling—Third Edition
Archived
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(10) |
EPA Method 9060A |
2004 |
Total Organic Carbon, Revision 1
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(16) |
ASTM D2505 |
2004 |
Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(41) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(14) |
ASTM D2502 |
2004 |
Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils From Viscosity Measurements
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(34) |
ASTM D6883 |
2004 |
Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1060.810(a) Table 1 |
ASTM D2862 |
2004 |
Standard Test Method for Particle Size Distribution of Granular Activated Carbon
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1060.810(c) Table 3 |
California Code of Regulations |
2004 |
Final Regulation Order, Article 1, Chapter 15, Division 3, Title 13
Archived
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(2)(xxxviii) |
SAE J-2534-1 |
2004 |
Recommended Practice for Pass-Thru Vehicle Programming
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 80.176(b) |
ASTM D6201 |
2004 |
Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 435.3(b)(1) |
ICC International Energy Conservation Code |
2004 |
IECC Baseline Building 2004
Archived
|
International Energy Conservation Council |
| Coast Guard |
|
21 CFR 172.736(b)(2) |
Food Chemicals Codex |
2004 |
Acid Value
Archived
|
National Academy Press |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
UN Publication |
2004 |
UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria
Archived
|
United Nations |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) D4 |
ASME B31.8 |
2004 |
Gas Transmission and Distribution Piping Systems
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) D3 |
ASME B31G |
2004 |
Manual for Determining the Remaining Strength of Corroded Pipelines
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) D2 |
ASME B16.5 |
2004 |
Steel Pipe Flanges and Pipe Fittings
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) B1 |
API 5L |
2004 |
Specification for Line Pipe
Archived
|
American Petroleum Institute |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) F3 |
NFPA 59 |
2004 |
Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants
Archived
|
National Fire Protection Association |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C1 |
ASTM A53/A 53M |
2004 |
Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C2 |
ASTM A106/A 106M |
2004 |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) C6 |
ASTM A671 |
2004 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) C1 |
ASME B16.9 |
2004 |
Factory Made Wrought Steel Buttwelding Fittings
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) C4 |
ASME B31.8 |
2004 |
Gas Transmission and Distribution Piping Systems
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) D1 |
MSS SP-75 |
2004 |
Specification for High-Test Wrought Butt Welding Fittings
Archived
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E5 |
ASTM A671 |
2004 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E1 |
ASTM A53/A 53M |
2004 |
Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) E2 |
ASTM A106/A 106M |
2004 |
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Archived
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) B1 |
API 5L |
2004 |
Specification for Line Pipe
Archived
|
American Petroleum Institute |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 195.3(c)(3) C3 |
ASME B31G |
2004 |
Manual for Determining the Remaining Strength of Corroded Pipelines
Archived
|
American Society of Mechanical Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 393.7(b)(1) |
SAE J-581 |
2004 |
Auxiliary Upper Beam Lamps
Archived
|
Society of Automotive Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 393.7(b)(13) |
ASTM D4956 |
2004 |
Standard Specification for Retroreflective Sheeting for Traffic Control
Archived
|
ASTM International |
| Rural Utilities Service |
|
7 CFR 1728.97(g)(1) |
WCLIB No. 17 |
2004 |
Grading Rules for West Coast Lumber
Archived
|
West Coast Lumber Inspection Bureau |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(6) |
AWPA A7 |
2004 |
Standard for Wet Ashing Procedures for Preparing Wood for Chemical Analysis
Archived
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(b)(1) |
AITC 200 |
2004 |
Inspection Manual
Archived
|
American Institute of Timber Construction |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(44) |
ASTM D6985 |
2004 |
Standard Specification for Middle Distillate Fuel Oil--Military Marine Applications
Archived
|
ASTM International |