| Environmental Protection Agency |
|
40 CFR 63.14(n)(5) |
NCASI Method ISS/FP-A105.01 |
2005 |
Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds
Archived
|
National Council of the Paper Industry for Air and Stream Improvement, Inc. |
| Environmental Protection Agency |
|
40 CFR 75.6(f)(4) |
API MPMS |
2005 |
Chapter 22, Section 2
Archived
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(3) |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(13) |
ASTM D1835 |
2005 |
Standard Specification for Liquefied Petroleum (LP) Gases
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(19) |
ASTM D3238 |
2005 |
Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(37) |
ASTM E359 |
2005 |
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(5) |
ASTM D388 |
2005 |
Standard Classification of Coals by Rank
Archived
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1060.810(a) Table 1 |
ASTM D5228 |
2005 |
Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1060.810(a) Table 1 |
ASTM D3802 |
2005 |
Standard Test Method for Ball-Pan Hardness of Activated Carbon
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(24) |
ASTM D129 |
2005 |
Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Archived
|
ASTM International |
| Coast Guard |
|
24 CFR 3285.4(h)(2) |
NFPA 70 |
2005 |
National Electrical Code
Archived
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 98.7(j)(1) |
TAPPI Method T650 |
2005 |
Solids Content of Black Liquor
Archived
|
Technical Association of the Pulp and Paper Industry |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CGA S-1.1 |
2005 |
Pressure Relief Device Standards
Archived
|
Compressed Gas Association |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
CAN/CGSB 43.147 |
2005 |
Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail
Archived
|
Canadian General Standards Board |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
Archived
|
United Nations |
| Research and Special Programs Administration |
|
49 CFR 192.7(c)(2) F4 |
NFPA 70 |
2005 |
National Electrical Code
Archived
|
National Fire Protection Association |
| Research and Special Programs Administration |
|
49 CFR 193.2013(c)(1) |
ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section VIII, Division 1
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 193.2013(c)(2) |
ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section VIII, Division 2
Archived
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 195.3(c) C5 |
ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section VIII, Division 1
Archived
|
American Society of Mechanical Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 195.3(c) C6 |
ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section VIII, Division 2
Archived
|
American Society of Mechanical Engineers |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 393.7(b)(19) |
NACM Publication |
2005 |
Welded Steel Chain Specifications
Archived
|
National Association of Chain Manufacturers |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
EPA-815-R-05-008 |
2005 |
Determination of Chlorine Dioxide and Chlorite Ion in Drinking Water Using Lissamine Green B and Horseradish Peroxidase with Detection by Visible Spectrophotom, Revision 1.1
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
EPA-600-R-05-055 |
2005 |
Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water
Archived
|
U.S. Environmental Protection Agency |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(4) |
AWPA A5 |
2005 |
Standard Methods for Analysis of Oil-Borne Preservatives
Archived
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(9) |
AWPA M3 |
2005 |
Standard Quality Control Procedures for Wood Preserving Plants
Archived
|
American Wood Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(23) |
RUS Bulletin 1728F-804 (D-804) |
2005 |
Specification and Drawings for 12.47/7.2 kV Line Construction
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Rural Utilities Service |
|
7 CFR 1755.901(f)(1) |
ITU-T Recommendation G.652 |
2005 |
Series G: Transmission Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of a single-mode optical fibre and cable
Archived
|
International Telecommunication Union--Telecommunication |
| Coast Guard |
|
46 CFR 56.01-2(d)(14) |
ASME B16.21 |
2005 |
Nonmetallic Flat Gaskets for Pipe Flanges
Archived
|
American Society of Mechanical Engineers |
| Energy Department |
|
10 CFR 430.3(c)(5) |
ANSI C78.81 |
2005 |
Electric Lamps--Double-Capped Fluorescent Lamps--Dimensional and Electrical Characteristics
Archived
|
American National Standards Institute |
| Drug Enforcement Administration |
|
21 CFR 1311.08(b)(1)(iii) |
FIPS Publication 140-2 |
2005 |
Annex C to FIPS Publication 140-2 ("Security Requirements for Cryptographic Modules''): Approved Random Number Generators
Archived
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(5)(i) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(5)(ii) |
ASTM F2413 |
2005 |
Standard Specification for Performance Requirements for Protective Footwear
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(c)(1) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1917.3(c)(2) |
ASTM F2413 |
2005 |
Standard Specification for Performance Requirements for Protective Footwear
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(c)(1) |
ASTM F2412 |
2005 |
Standard Test Methods for Foot Protection
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(c)(2) |
ASTM F2413 |
2005 |
Standard Specification for Performance Requirements for Protective Footwear
Archived
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(xiii) |
NFPA 11 |
2005 |
Standard for Low-Expansion Foam
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(xv) |
NFPA 12 |
2005 |
Standard on Carbon Dioxide Extinguishing Systems
Archived
|
National Fire Protection Association |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(f)(1) |
ANSI/AISC 360 |
2005 |
Specification for Structural Steel Buildings
Archived
|
American Institute of Steel Construction |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(1) |
ANSI/ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers; including Appendices, 2004 Edition; and July 1, 2005 Addenda, and all Section I Interpretations Volume 55
Archived
|
American Society of Mechanical Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(2) |
ANSI/ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section IV; including Appendices 1-3, 5, 6, and Non-mandatory Appendices B, C-F, H, I, K - M, & the Guide to Manufacturers Data Report Forms, 2004 Edition; July 1, 2005 add. & all Section IV Interpretations Volume 55
Archived
|
American Society of Mechanical Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(g)(3) |
ANSI/ASME B&PV Code |
2005 |
Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels; Divisions 1 and 2, 2004 Edition; July 1, 2005 Addenda, Divisions 1 and 2, and all Section VIII Interpretations Volumes 54 and 55
Archived
|
American Society of Mechanical Engineers |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(70) |
ANSI/API Spec. 6A, |
2005 |
Specification for Wellhead and Christmas Tree Equipment, Nineteenth Edition, July 2004; Contains API Monogram Annex as Part of U.S. National Adoption
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(26) |
API MPMS |
2005 |
Chapter 8, Section 2
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(27) |
API MPMS |
2005 |
Chapter 9, Section 1
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(33) |
API MPMS |
2005 |
Chapter 10, Section 9
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(10) |
API MPMS |
2005 |
Chapter 4, Section 1
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(8) |
API MPMS |
2005 |
Chapter 3, Section 1A
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(12) |
API MPMS |
2005 |
Chapter 4, Section 4
Archived
|
American Petroleum Institute |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(13) |
API MPMS |
2005 |
Chapter 4, Section 5
Archived
|
American Petroleum Institute |