| Environmental Protection Agency |
|
40 CFR 63.1329(c)(2)(ii) |
ASTM D3370 |
2007 |
Standard Practices for Sampling Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(26) |
ASTM D3177 |
2007 |
Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(27) |
ASTM D5373 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix A, Section 2.1.1.1(c) |
ASTM D3177 |
2007 |
Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75, Appendix G, Section 2.1.2 |
ASTM D5373 |
2007 |
Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.46(d) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.47(r)(1)(i) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.47(h)(1) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.1101(h)(3) |
ASTM D6751 |
2007 |
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.1468(b)(2) |
ASTM D4442 |
2007 |
Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(b)(10) |
ASTM D2163 |
2007 |
Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(4) |
California Regulatory Requirements |
2007 |
Approved on November 9, 2007, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(20) |
SAE J-1979 |
2007 |
E/E Diagnostic Test Modes
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(24) |
SAE J-2403 |
2007 |
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature—Truck and Bus
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 86.1(h)(1) |
TMC RP 1210B |
2007 |
Windows Application Program Interface
|
Truck and Maintenance Council |
| Environmental Protection Agency |
|
40 CFR 86.1806-05(j)(2) |
California Regulatory Requirements |
2007 |
Approved on November 9, 2007, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II)
|
California Air Resources Board |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(9) |
ASME MFC-16 |
2007 |
Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.74(c)(6) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.354(d)(3) |
ASME MFC-16 |
2007 |
Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(d)(4) |
ASTM D1941 |
2007 |
Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.123(c)(1)(i)(A) |
EPA Publication |
2007 |
Emissions Inventory Improvement Program, Volume II: Chapter 16, Methods for Estimating Air Emissions from Chemical Manufacturing Facilities, Final
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(iii) |
ASTM D2013 |
2007 |
Standard Method of Preparing Coal Samples for Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(iv) |
ASTM D2234/D 2234M |
2007 |
Standard Practice for Collection of a Gross Sample of Coal
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(x) |
ASTM D5291 |
2007 |
Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (62) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (65) |
ASTM D516 |
2007 |
Standard Test Method for Sulfate Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (70) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
ASTM D3373 |
2007 |
Standard Test Method for Vanadium in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (75) |
ASTM D1976 |
2007 |
Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 272.201(c)(1)(i) |
ARHWMP |
2007 |
EPA Approved Arkansas Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of Arkansas |
| Environmental Protection Agency |
|
40 CFR 147.1(c) |
State and Tribal Statutes and Regulations |
2006 |
The relevant State or Tribal statutes and regulations that contain standards, requirements, and procedures applicable to owners or operators
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 272.1751(c)(1)(i) |
NDHWMP |
2006 |
EPA Approved North Dakota Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program
|
State of North Dakota |
| Environmental Protection Agency |
|
40 CFR 141.74(a)(1) Table (Total Coliform) |
APHA Method 9222 B |
2006 |
Membrane Filtration Qualitative (LES Endo): Total Coliform
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table |
EPA Method 1600 |
2006 |
Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.402(c)(2) Table Note 7 |
APHA Method 9222 B |
2006 |
Membrane Filtration Qualitative (LES Endo): Total Coliform
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 52 Subpart ZZ |
WYSIP |
2006 |
State of Wyoming Implementation Plan with Regulatory and Nonregulatory Revisions
|
State of Wyoming |
| Environmental Protection Agency |
|
40 CFR 55.14(d)(3)(i) |
40 CFR part 52, subpart C |
2006 |
State of California Requirements Applicable to OCS Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix A, 6.0 (5) |
EPA-240-B-06-001 |
2006 |
Guidance for the Data Quality Objectives Process. EPA QA/G-4
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 58 Appendix A, 2.7 |
USEPA Publication |
2006 |
List of Designated Reference and Equivalent Methods
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.17(b)(4) |
AGA Report No. 7 |
2006 |
Measurement of Gas by Turbine Meters
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(4) |
ASME MFC-5M |
2006 |
Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(6) |
ASME MFC-7M |
2006 |
Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(7) |
ASME MFC-9M |
2006 |
Measurement of Liquid Flow in Closed Conduits by Weighing Method
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(f)(8) |
ASME MFC-11M |
2006 |
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(78) |
ASTM D1946 |
2006 |
Standard Test Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(162) |
ASTM D4468 |
2006 |
Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Calorimetry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(165) |
ASTM D4809 |
2006 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(167) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.18(c)(3)(i)(A) |
ASTM D1946 |
2006 |
Standard Method for Analysis of Reformed Gas by Gas Chromatography
|
ASTM International |