NOTE: This database has not been updated since August 16, 2016 and is being provided as a source for historical data. Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information may contain errors or be incomplete.
Use the CSV record export feature to download an export file of the data. The current search filters will be applied to the export. All pages of the current search result will be included in the export, not just the current page.
| Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Title of Standard Sort descending | Standard Publishing Organization |
|---|---|---|---|---|---|
| Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(4) | SAE J-2261 | Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or more in Overall Width | Society of Automotive Engineers | |
| Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-586 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
| Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(3) | SAE J-586 | Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width | Society of Automotive Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(b)(1)(i) | ANSI K61.1 | Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(b)(1)(iii) | ANSI K61.1 | Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 40 | Storage and Handling of Cellulose Nitrate Film | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 571.108 S14.6.2.1.1(a) | 29 CFR 1910.106 | Storage of Flammable and Combustible Liquids | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.13 | Storage/Retrieval (S/R) Machines and Associated Equipment | American Society of Mechanical Engineers | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 322 | Structural Plain Concrete | American Concrete Institute | |
| Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | HP-SG-96 | Structural Design Guide for Hardwood Plywood Wall Panels--HPVA Design Guide | Hardwood Plywood and Veneer Association | |
| Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | AITC A190.1 | Structural Glued Laminated Timber | American Institute of Timber Construction | |
| National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Drawing No. 420-5121 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4007 | Structural replacement | Reprographic Technologies | |
| National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5121 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-383X | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| National Highway Traffic Safety Administration | 49 CFR 572.142(a) | Drawing No. TE-107-001 | Structural replacement of 1/2 mass of the neck load transducer | Reprographic Technologies | |
| National Highway Traffic Safety Administration | 49 CFR 572.145(c)(2)(i) | Drawing No. 210-4510 | Structural replacement to the pelvis weldment | Reprographic Technologies | |
| Federal Aviation Administration | 14 CFR 27.613(d)(4) | MIL-HDBK-23 | Structural Sandwich Composites | U.S. Department of Defense | |
| Federal Aviation Administration | 14 CFR 29.613(d)(4) | MIL-HDBK-23 | Structural Sandwich Composites | U.S. Department of Defense | |
| Public Health Service | 42 CFR 37.43 | NCRP Report No. 49 | Structural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma-Rays up to 10 MeV | National Council on Radiation Protection and Measurement | |
| Coast Guard | 42 CFR 37.43 | NCRP Report No. 49 | Structural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma-Rays up to 10 MeV | National Council on Radiation Protection and Measurement | |
| Public Health Service | 42 CFR 37.45 | NCRP Report No. 147 | Structural Shielding Design for Medical X-Ray Imaging Facilities | National Council on Radiation Protection and Measurement | |
| Public Health Service | 42 CFR 37.10(e)(3) | NCRP Report No. 147 | Structural Shielding Design for Medical X-Ray Imaging Facilities | National Council on Radiation Protection and Measurement | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | AWS D1.4 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(2) | AWS D1.4 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Minerals Management Service | 30 CFR 250.901(d)(13) | AWS D1.4 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Federal Highway Administration | 23 CFR 625.4(b)(9) | ANSI/AWS D1.4 | Structural Welding Code--Reinforcing Steel | American Welding Society | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Minerals Management Service | 30 CFR 250.901(d)(12) | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(20) | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(j)(1) | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Mine Safety and Health Administration | 30 CFR 77.403-2 | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Mine Safety and Health Administration | 30 CFR 77.403-1(f) | AWS D1.1 | Structural Welding Code--Steel | American Welding Society | |
| Federal Highway Administration | 23 CFR 625.4(b)(6) | D1.4/D1.4M | Structural Welding Code-Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(2) | AWS D1.4-98 | Structural Welding Code—Reinforcing Steel | American Welding Society |
| Federal Highway Administration | 23 CFR 625.4(d)(2) | D1.4/D1.4M | Structural Welding Code—Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(h)(1) | AWS D1.1:2000 | Structural Welding Code—Steel | American Welding Society |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(20) | AWS D1.1:2000 | Structural Welding Code—Steel | American Welding Society | |
| Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | AWS D1.1/D1.1M | Structural Welding Code—Steel, 18th ed. | American Welding Society | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(m)(1) | AWS D1.1/D1.1M | Structural Welding Code—Steel, 18th ed. | American Welding Society | |
| Occupational Safety and Health Administration | 29 CFR 1910.243(e)(1)(i) | 29 CFR 1910.212 | Subpart O, Machinery and Machine Guarding, General Requirements for All Machines | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | USDA Home and Garden Bulletin No. 64 | Subterranean Termites--Their Prevention and Control in Buildings | U.S. Department of Agriculture | |
| Food and Drug Administration | 21 CFR 184.1091(b) | Food Chemicals Codex | Succinic Acid | National Academy Press | |
| Coast Guard | 21 CFR 184.1091(b) | Food Chemicals Codex | Succinic Acid | National Academy Press | |
| Food and Drug Administration | 21 CFR 172.831(b) | Food Chemicals Codex | Sucralose | National Academy Press | |
| Coast Guard | 21 CFR 172.831(b) | Food Chemicals Codex | Sucralose | National Academy Press | |
| Food and Drug Administration | 21 CFR 172.869(b)(9) | Food Chemicals Codex | Sucrose Fatty Acid Esters | National Academy Press |