| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(19) |
NFPA 80 |
1970 |
Standard for the Installation of Fire Doors and Windows
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(23) |
NFPA 96 |
1970 |
Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(24) |
NFPA 101 |
1970 |
Code for Life Safety From Fire in Buildings and Structures
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(26) |
NFPA 203M |
1970 |
Manual on Roof Coverings
Archived
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(1) |
ANSI A10.3 |
1970 |
Safety Requirements for Explosive-Actuated Fastening Tools
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(3)(i) |
ACGIH Publication |
1970 |
ACGIH Threshold Limit Values (TLVs)
Archived
|
American Conference of Governmental Industrial Hygienists |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC A-7 |
1970 |
Recommended Practices and Standards Covering Boat Heating Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 160.048-1(a)(2) |
FedSpec CCC-C-426D |
1970 |
Cloth, Drill, Cotton
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 114.600(b) |
ABYC A-7 |
1970 |
Recommended Practices and Standards Covering Boat Heating Systems
Archived
|
American Boat and Yacht Council |
| Coast Guard |
|
46 CFR 125.180(b) |
ABYC A-7 |
1970 |
Recommended Practices and Standards Covering Boat Heating Systems
Archived
|
American Boat and Yacht Council |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(g)(1) |
ACGIH Publication |
1970 |
Threshold Limit Values of Airborne Contaminants
|
American Conference of Governmental Industrial Hygienists |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(4) |
ANSI A11.1 |
1970 |
Practice for Industrial Lighting
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(9) |
ANSI A17.1d |
1970 |
Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(14) |
ANSI B7.1 |
1970 |
Safety Code for the Use, Care, and Protection of Abrasive Wheels
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(y)(4) |
NFPA 80 |
1970 |
Standard for Fire Doors and Windows, Class E or F Openings
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(1) |
SAE Publication |
1970 |
SAE Handbook
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(4) |
SAE J-168 |
1970 |
Protective Enclosures—Test Procedures and Performance Requirements
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(10) |
SAE J-321a |
1970 |
Fenders for Pneumatic-Tired Earthmoving Haulage Equipment
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926 Subpart L Appendix B |
USDOC PS 20 |
1970 |
American Softwood Lumber Standard
|
U.S. Department of Commerce |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(19) |
ASTM D1193 |
1970 |
Standard Specification for Reagent Water
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(30) |
ASTM E274 |
1970 |
Standard Method of Test for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(45) |
SAE J-1703b |
1970 |
Motor Vehicle Brake Fluid
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(22)(i) |
ENH Journal of Chromatography |
1970 |
Direct Determination of Elemental Phosphorus by Gas-Liquid Chromatography
Archived
|
Elsevier/North-Holland, Inc. |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(10) |
ANSI A17.1d |
1970 |
Safety Code for Elevators, Dumbwaiters, and Moving Walks
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(14) |
ANSI A120.1 |
1970 |
Safety Code for Powered Platforms for Exterior Building Maintenance
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(15) |
ANSI B7.1 |
1970 |
Safety Code for the Use, Care and Protection of Abrasive Wheels
Archived
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(36) |
ANSI H23.1 |
1970 |
Seamless Copper Water Tube Specification
Archived
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(h)(1) |
AOAC Method 9 |
1970 |
Official Methods of Analysis, 11th Edition
Archived
|
AOAC International |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec TT-S-230C |
1970 |
Sealing Compound, Elastomeric Type, Single-Component (for Caulking, Sealing and Glazing in Buildings and Other Structures)
Archived
|
Federal Specifications Standards and Test Methods |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec TT-S-1657 |
1970 |
Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction)
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 169.115(c)(1) |
ABYC A-3 |
1970 |
Recommended Practices and Standards Covering Galley Stoves
Archived
|
American Boat and Yacht Council |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 533.3R |
1970 |
Fabrication, Handling and Erection of Precast Concrete Wall Panels
Archived
|
American Concrete Institute |
| Coast Guard |
|
33 CFR 183.5(b) |
MilSpec-P-21929B |
1970 |
Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid
Archived
|
U.S. Department of Defense |
| Mine Safety and Health Administration |
|
30 CFR 75.1107-17 |
NFPA 11A |
1970 |
Standard for Medium- and High-Expansion Foam Systems
Archived
|
National Fire Protection Association |
| Mine Safety and Health Administration |
|
30 CFR 77.403-2 |
SAE J-320b |
1970 |
Minimum Performance Criteria for Rollover Protective Structures for Prime Movers
Archived
|
Society of Automotive Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-450A |
1970 |
Flooring, Vinyl Plastic
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.005-1(a)(1) |
FedSpec L-P-375C |
1970 |
Plastic Film, Flexible, Vinyl Chloride
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.047-1(a)(1) |
FedSpec L-P-375C |
1970 |
Plastic Film, Flexible, Vinyl Chloride
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 164.018-5(a)(3) |
FedSpec CCC-C-426D |
1970 |
Cloth, Drill, Cotton
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 160.048-1(a)(2) |
FedSpec L-P-375C |
1970 |
Plastic Film, Flexible, Vinyl Chloride
Archived
|
Federal Specifications Standards and Test Methods |
| Coast Guard |
|
46 CFR 164.018-5(a)(1) |
FedSpec L-P-375C |
1970 |
Plastic Film, Flexible, Vinyl Chloride
Archived
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 85, Subpart V, Appendix I, Section (H)(1)(a) |
SAE J-549 |
1970 |
Preignition Rating of Spark Plugs
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.244(c)(3)(ii) |
AOAC Method 9 |
1970 |
Official Methods of Analysis, 11th Edition
|
AOAC International |
| Environmental Protection Agency |
|
40 CFR 264.314(d)(2)(i) |
ASTM G21 |
1970 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 265.314(e)(2)(i) |
ASTM G21 |
1970 |
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 233.70(a)(5) |
MIOD regulations |
1969 |
The Michigan Administrative Procedures Act of 1969, MCL 24-201 et seq.
|
State of Michigan |
| Environmental Protection Agency |
86 FR 34308 |
40 CFR 1066 |
SAE J2452 (J2452_199906) |
1969 |
Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments
|
SAE International |
| Labor Department |
89 FR 28218 |
30 CFR 60 |
ANSI Z88.2-1969 |
1969 |
Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection
|
American National Standards Institute |
| Labor Department |
89 FR 28218 |
30 CFR 56 |
ANSI Z88.2-1969 |
1969 |
Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection
|
American National Standards Institute |
| Labor Department |
89 FR 28218 |
30 CFR 75 |
ANSI Z88.2-1969 |
1969 |
Lowering Miners' Exposure to Respirable Crystalline Silica and Improving Respiratory Protection
|
American National Standards Institute |