| Environmental Protection Agency |
|
40 CFR 60.17(g)(26) |
ASTM D240 |
1992 |
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
Archived
|
ASTM International |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ISO 9978 |
1992 |
Sealed Radioactive Sources--Leakage Test Methods
Archived
|
International Organization for Standardization / International Electrotechnical Commission |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.7(b)(22)(ii) |
CIA PPRS-2 |
1992 |
Polypropylene Fiber Rope, 3-Strand and 8-Strand Constructions
Archived
|
Cordage Institute |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(41) |
ASTM D396 |
1992 |
Standard Specification for Fuel Oils
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(92) |
ASTM D2369 |
1992 |
Standard Test Method for Volatile Content of Coatings
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(126) |
ASTM D3246 |
1992 |
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
Archived
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.90(b)(1) |
Drawing No. 126-0000-0015, 0017-0027 |
1992 |
Drawing numbers 126-0000 through 126-0015 (sheets 1 through 3), 126-0017 through 126-0027, and a parts list, Parts List for CAMI Newborn Dummy, Construction of the Newborn Infant Dummy
Archived
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 63.14(l)(3) |
EPA SW-846-3020A |
1992 |
Acid Digestion of Aqueous Samples And Extracts For Total Metals For Analysis By GFAA Spectroscopy, Revision 1
Archived
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(b)(1) |
Drawing No. SA-572-S4 |
1992 |
Accelerometer Specification
Archived
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 55.14(e)(17)(i)(A) |
40 CFR part 52, subpart II. |
1992 |
State of North Carolina Air Pollution Control Requirements Applicable to OCS Sources
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 92.5(b)(3) |
ASTM D287 |
1992 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 260.11(f)(1) |
EPA-450-R-92-019 |
1992 |
Screening Procedures for Estimating the Air Quality Impact of Stationary Sources
Archived
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.14(e)(1) |
ASHRAE 52.1 |
1992 |
Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 92.5(a)(1) |
ANSI B109.1 |
1992 |
Diaphragm Type Gas Displacement Meters
Archived
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D2699 |
1992 |
Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D2699 |
1992 |
Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D2700 |
1992 |
Standard Test Method for Knock Characteristics of Motor and Aviation Fuels
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D2700 |
1992 |
Standard Test Method for Knock Characteristics of Motor and Aviation Fuels
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(159) |
ASTM D4444 |
1992 |
Standard Test Method for Use and Calibration of Hand-Held Moisture Meters
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(e)(1) |
AGA Report No. 3, Part 3 |
1992 |
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids, Part 3: Natural Gas Applications
Archived
|
American Gas Association |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(3) |
ASTM D287 |
1992 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 72.13(a)(1) |
ASTM D388 |
1992 |
Standard Classification of Coals by Rank
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(21) |
ASTM D2502 |
1992 |
Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(22) |
ASTM D2503 |
1992 |
Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
Archived
|
ASTM International |
| Energy Department |
|
10 CFR 430.3(e)(5) |
ASHRAE 41.2 |
1992 |
Standard Methods for Laboratory Airflow Measurement
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec HH-I-558C |
1992 |
Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type)
Archived
|
Federal Specifications Standards and Test Methods |
| Food and Drug Administration |
|
21 CFR 101.4(h) |
AHPA Publication |
1992 |
Herbs of Commerce
Archived
|
American Herbal Products Association |
| Federal Highway Administration |
|
23 CFR 625.4(b)(1) |
AASHTO Publication |
1992 |
Standard Specification for Highway Bridges
Archived
|
American Association of State Highway and Transportation Officials |
| Federal Highway Administration |
|
23 CFR 625.4(b)(9) |
ANSI/AWS D1.4 |
1992 |
Structural Welding Code--Reinforcing Steel
Archived
|
American Welding Society |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AAMA 800 |
1992 |
Voluntary Specifications and Test Methods for Sealants
Archived
|
American Architectural Manufacturers Association |
| Housing and Urban Development Department |
|
24 CFR 200.940(a)(2) |
ASTM E774 |
1992 |
Standard Specifications for Sealed Insulating Glass Units
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
CABO/ANSI A117.1 |
1992 |
Providing Accessibility and Usability for Physically Handicapped People
Archived
|
Council of American Building Officials |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 318 |
1992 |
Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete
Archived
|
American Concrete Institute |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI A108.1A |
1992 |
Specifications for Installation of Ceramic Tile in the Wet Set Method with Portland Cement Mortar
Archived
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(7) |
APHA Method 2540 G |
1992 |
Standard Methods for the Examination of Water and Wastewater
Archived
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(6) |
APHA Method 2710 B |
1992 |
Standard Methods for the Examination of Water and Wastewater
Archived
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(2) |
APHA Method 9221 E |
1992 |
Fecal Coliform Procedure
Archived
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(2) |
APHA Method 9222 D |
1992 |
Standard Methods for the Examination of Water and Wastewater
Archived
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 503.8(b)(5) |
APHA Method 9260 D |
1992 |
Standard Methods for the Examination of Water and Wastewater
Archived
|
American Public Health Association |
| Coast Guard |
|
46 CFR 56.01-2(e)(14) |
ASTM A197 |
1992 |
Standard Specification for Cupola Malleable Iron
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(33) |
ASTM A369/A 369M |
1992 |
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 56.01-2(e)(43) |
ASTM B16 |
1992 |
Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C578 |
1992 |
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C843 |
1992 |
Application of Gypsum Veneer Plaster
Archived
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1234.3(h)(1) |
ASHRAE 55 |
1992 |
Thermal Environmental Conditions for Human Occupancy
Archived
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D2622 |
1992 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 91.6(b)(1) Table |
ASTM D2622 |
1992 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 89.6(a)(4) |
ASTM D287 |
1992 |
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
Archived
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 260.11(b)(5) |
ASTM D2879 |
1992 |
Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
Archived
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM D3679 |
1992 |
Rigid Poly (Vinyl Chloride) (PVC) Siding
Archived
|
ASTM International |