Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

National Emission Standards for Hazardous Air Pollutants: Miscellaneous Coating Manufacturing Residual Risk and Technology Review

FR Abstract
The U.S. Environmental Protection Agency (EPA) is taking final action on the residual risk and technology review (RTR) conducted for the Miscellaneous Coating Manufacturing (MCM) source category regulated under national emission standards for hazardous air pollutants (NESHAP). These final amendments also address emissions during periods of startup, shutdown, and malfunction (SSM), including clarifying regulatory provisions for certain vent control bypasses, provisions for electronic reporting of performance test results, performance evaluation reports, compliance reports, and Notification of Compliance Status (NOCS) reports; and provisions to conduct periodic performance testing of oxidizers used to reduce emissions of organic hazardous air pollutants (HAP).
Incorporation
FR Document Number
2020-13439
Federal Register Volume
85
Federal Register Year
2020-08-14
Federal Register Start Page
49724
Federal Register End Page
49752
CFR Citation
40 CFR 63
FR Citation
85 FR 49724
CFR title
40
CFR Part
63
Document Number
ANSI/ASME PTC 19.10-1981
Document Edition
1981
Standard Title
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus], issued August 31, 1981
Excerpts
(Reapproved 2015)e1, (incorporated by reference, see § 63.14); (ii) ASTM D2697-03 (Reapproved 2014) (incorporated by reference, see § 63.14); or (iii) … instrumental procedures, you may use ANSI/ASME PTC 19-10-1981 Part 10 (incorporated by reference, see § 63.14) as an acceptable alternative. (iii) As an alternative … of appendix A to this part, you may use ASTM Method D6348-12e1 (incorporated by reference, see § 63.14), with the caveats that the test plan preparation
Record Source
www.federalregister.gov